From DDL Wiki

Jump to: navigation, search

1 Group Information
2 Executive Summary
3 Major Stakeholders
4 Product Details and Observations
- 4.1 Product Specifications
- 4.2 Product Observations
5 Product Operation and Preliminary User Study
6 Potential Innovations
7 Bill of Materials
8 Design for Manufacturing and Assembly Analysis
- 8.1 Design for Manufacturing
- 8.2 Design for Assembly
9 Failure Mode and Effect Analysis
10 Design for Environment
11 References and External links

Group Information

24-441 Spring 2012, Group 10

Claire Castleman: DFMA Lead

Elisha Clayton: DFE Lead

Michael Serebrennikov: Team Leader

Mathew Swisher: FMEA Lead

Vedant Saraf: Data Analysis

Product: Razor Scooter

Executive Summary

A kick scooter is a simple human-powered vehicle, composed of a small platform to stand on and handle bars to hold onto and steer, used as a means of transportation over short distances. As a case study, our team analyzed the Razor brand scooter, one of the most popular in the United States. The scooter was disassembled in order to gain an understanding of how it is manufactured and put together. An initial user study was conducted to determine shortcomings in the overall design. One major problem proved that the scooter is difficult for larger users. Following the data acquisition sessions, problems with both usage and design were found. Some of the construction was found to be overly complicated. The DFMA and DFE analyses showed that many improvements could be made by simplifying parts or removing unnecessary parts. The FMEA analysis showed possible safety improvements in the brakes, axles, and collapsing mechanism. The goal of the overall project is to come up with an innovation to make the scooter easier or safer to use, to make the construction simpler, or to change its purpose by adding a utility attachment.

Major Stakeholders

Manufacturing

Manufacturers will care mainly about material and process costs. Some of their requirements are:

Simple parts that can be mass produced
A small number of unique parts
Assembly with minimal effort
Fast assembly time
Low environmental effect of materials used
Product/Material re-usability

Shipping

The shipping companies will be most concerned with spending the least amount of resources while transporting the maximum amount of product. Some of their requirements are:

Maximum compressibility
Low weight
Low volume
Reduce empty/wasted space
Durable enough to withstand damage with minimal padding

Retailers

The primary goal of the retailer is to sell the product as quickly and for as high of a profit as possible. The retailers' requirements are:

Appealing colors to customers
Cheap product cost for maximal profit
Easy to advertise
Minimal store floor-space usage
Efficient packaging for minimal storage space

Potential Consumers and their concerns

The consumers can be divided up into three major groups - parents, children, and college students. While the three groups have some requirements that overlap, ultimately each group has unique needs. In order for the product to be the most successful on the market, it should fulfill each groups requirements at the same time.

Parents

Parents will be purchasing the product for their children to use. Their primary concerns will be:

Safe
Low cost
Reliable
Durable
Something their kids will want and consider cool

Kids

Children will use the product mainly as a toy, but it will also double as a status symbol. Their needs are:

Fun
Cool
Light weight
Trick friendly

College Students

College Students will use the scooter as a light and easy form of transportation around campus. The requirements for college students are:

Portable
Collapsible
Durable
Light weight
Easy to carry/store
Energy efficient
Cheap

Product Details and Observations

Product Specifications

These product specifications are provided by the RazorUSA Company.[1] The particular model analyzed is the A2. This is the same as the model A, with the only difference being the addition of a wheelie bar and shocks.

Material: Aluminum, Steel
Number of Wheels: 2
Front Wheel Material: Urethane
Front Wheel Size: 98mm
Rear Wheel Material: Urethane
Rear Wheel Size: 98mm
Wheel Base: 20.0 "
Bearing Type: ABEC-5
Maximum Weight Capacity: 143.0 Lb.
Manufacturer's Suggested Age: 8 Years and Up
Dimensions: 34.0 " H x 26.5 " L x 13.0 " W
Weight: 7.0 Lb.

Product Observations

This particular model scooter has a rubber shock installed on the front wheel assembly (see image in the Bill of Materials Section below). The collapsing mechanism on the front of the scooter has locking grooves as a safety precaution when folding/unfolding the scooter. The operation of the folding mechanism is initiated with a very simple release lever that can be operated with one hand. This particular scooter comes with an optional wheelie bar. While arguments can be made that this is added to be able to do tricks and stunts, it mainly serves as a foot rest for the rider. It also adds a slightly "extreme" look to the scooter. In order to prevent the riders foot from sliding on the deck of the scooter, the Razor company added a sandpaper like sticker. While this has an important function, it also makes others aware that this scooter is in fact an authentic Razor, something that might appeal to younger children. The handlebars were coated in a comfortable cushy material in order to make riding more enjoyable for the user. The spoon brake system proved to be somewhat effective in slowing down the scooter, and is fairly easy to operate, making it stand out to parents who may be buying the scooters for their children and concerned for their safety.

Product Operation and Preliminary User Study

Product Operation

The rider places hands on the handle bars and the inside foot on the deck for stability
To propel the scooter, the rider pushes off with the outside foot and repeats this step until desired speed is reached
The rider then lifts the outside foot off the ground and either lets it hover in the air or rests on the deck along with the inside foot until more speed is desired
In order to stop, the rider either jumps, runs, or walks off the deck of the scooter or safely uses the inside foot to press down on the hinged fender that begins to stop the back wheel from any further rotational motion

How the Product Works Mechanically

Propelled by a rider pushing one foot off the ground which makes the unidirectional wheels move in a rotational motion
To collapse the product, the handlebars are released by pressing two buttons that secure them in place atop the head-tube. The head-tube telescopes into itself and then folds down onto the deck by pushing a lever, which releases the tube from its locked position for easier storage and portability of the scooter.
To stop the scooter, the rider presses a hinged fender brake down on the back wheel, creating a buildup of friction such that the scooter begins to slow down and gradually come to a stop.

Preliminary User Study

The scooter is difficult for larger users. While there are bigger models, an adjustable universal model would be an optimal solution.
- The deck is too small for larger shoes to fit on fully
- Even at the maximum setting, the handle bars are too low for tall users
- Larger users can easily miss the brake while trying to stop
- A 143lb weight capacity limits the customer base severely
Brake proves to be ineffective for stopping very quickly
- Sudden heavy braking can lead to locking the rear wheel, which in turn will wear it down
Leaning back slightly can cause the user to fly backwards off the scooter
The turning system proved to be difficult to use
- The direct connection to the front wheels causes a safety hazard at speed if the user turns the handlebars sharply
- User must turn really wide, or stop to turn

Potential Innovations

Following the usage study and product dissection study, the following list of possible innovations and improvements was compiled based on the analysis:

Wheel innovations
- Smoother ride
- Omnidirectional capable wheels
- Collapsible wheels
Greater energy output with less effort input
Easier/simpler collapsible mechanism
Reduced weight
Reduced volume when collapsed/increased potability
Adjustments for larger users
- Telescoping handlebars
- Adjustable deck dimensions
Multinational use
- Ski attachment for snow use
Anti-lock brake system
- Hand operated disk brake
- Foot operated disk brake
Removal of hard-to-use release buttons on handlebars
Added utility attachments
- Broom/mop attachment for novelty cleaning product
Ease of use modifications
- Foot operated collapsing mechanism
- Kick-up collapsing mechanism
- Foot deck rotational lock for more comfortable carrying
More environmentally friendly materials/production process

Bill of Materials

In order to make the BOM more comprehensible, it is split up into separate subassembly BOMs. Repeating components share the same part number across subassemblies.

Front Wheel Subassembly

Part No.	Part Name	Material	Quantity	Function	Weight (oz)	Dimensions	Manufacturing Process
01	Washer	Steel	1	Distribute Load on axle to frame	<0.1		Stamped
02	Screw	Steel	1	Holds axle in place	0.2		Purchased
03	Pin Nut	Steel	1	Acts as the front axle	0.4		Purchased
04	Bearing	Steel	2	Allows the wheel to turn smoothly	0.4	ABEC-5	Purchased
05	Bushing	Steel	1	Distributes any horizontal loads between the two bearings and helps keeps both in place	0.1		Extruded
06	Wheel	Urethane and polypropylene	1	Facilitates motion by rotating around the axle	3.4	98mm Diameter	Injection Molded

Shock and Wheel Attachment Subassembly

Part No.	Part Name	Material	Quantity	Function	Weight (oz)	Dimensions	Manufacturing Process
07	Washer	Plastic	2	Distributes load from pin connecting subassembly to lower tube subassembly	<0.1		Injection Molded
08	Disk	Aluminum	1	Prevents lower tube subassembly from damaging rubber shock absorber	0.2		Stamped
09	Screw	Steel	1	Used with the pin nut to pin shock subassembly to lower tube subassembly	0.2	3/16	Purchased
10	Pin Nut	Steel	1	Used with the screw to pin shock subassembly to lower tube subassembly	0.6	4 cm	Purchased
11	Washer	Steel	1	Distributes load on pin nut across plastic washer	<0.1		Stamped
12	Shock	Rubber	1	Allows for a smoother ride by damping sudden motion	1.4		Injection Molded
13	Wheel Bracket	Steel	1	Holds shock subassembly together and allows for connection to other subassemblies	4.4		Stamped and Bent
14	Suspension Bracket	Plastic	1	Pin guide and protects against a possible pinch point	0.2		Injection Molded

Lower Tube Subassembly

Part No.	Part Name	Material	Quantity	Function	Weight (oz)	Dimensions	Manufacturing Process
15	Threaded Tube	Steel	1	Connects lower tube subassembly to upper tube subassembly, shock subassembly, and the containment tube	9.6	18 cm long	Extruded and Welded to a piece that was Stamped and Bent
16	Bearing	Steel	2	Allows the handle bars to turn smoothly	0.2	2.1 cm (inner) 3.7 cm (outer)	Purchased
17	Bearing Track	Steel	1	Provides a smooth path for the bearings to roll along	1.2	4.5cm OD, 2.5cm ID	Pressed and Machined
18	Nut	Steel	1	Keeps bearing track in place and helps subassembly attach to collapsing mechanism	0.7	3.2cm OD, 2.6cm ID	Machined
19	Screw	Steel	1	Used to tighten the collar	0.3	3/16, 1.4 cm	Purchased
20	Collar	Aluminum	1	Used to attach subassembly to the bottom tube.	0.5		Machined

Collapsing Mechanism Subassembly

Part No.	Part Name	Material	Quantity	Function	Weight (oz)	Dimensions	Manufacturing Process
23	Containment Tube	Steel	1	Contains most of the moving parts in the subassembly	10.3		Extruded and Machined piece Welded to an Extruded and Drawn piece
24	Screw	Steel	1	holds the tension adjuster in its slot	0.1	M3x8	Purchased
25	C-Clips	Steel	2	holds the pins in place	<0.1		Stamped
26	Pin	Steel	1	transfers torque from pin to tension adjuster	0.6		Purchased
27	Spring Tensioner	Aluminum	1	Converts torque from the lever to force on the tension adjuster	0.8	3.8 cm	Extruded and Machined
28	Edge Protector	Plastic	1	Covers sharp edges	0.1		Injection Molded
29	Guide	Plastic	2	Keeps Spring tension adjuster from rotating	<0.1		Injection Molded
30	Spring	Steel	1	Pulls tension adjuster into a position that locks the mechanism unless lever is pressed	0.1		Bent
31	Lever	Aluminum	1	To initiate collapsing	0.2		Extruded and Machined
32	Torsional Spring	Steel	1	To return lever to lock position	<0.1		Bent
33	Tension Adjuster	Aluminum	1	Slides to lock and unlock mechanism as tension changes	0.3		Purchased
34	Pin	Steel	1	Attaches mechanism to the frame and holds one end of the spring	0.7		Purchased

Front Deck Subassembly

Part No.	Part Name	Material	Quantity	Function	Weight (oz)	Dimensions	Manufacturing Process
21	Cover	Plastic	2	Decorative Cover	0.4		Injection Molded
22	Screw	Steel	2	Attaches decorative covers to locking bracket	<0.1	3/16, 0.4 cm	Purchased
35	Edge Protector	Plastic	1	Covers sharp edges	0.2	5.5 x 2.5 x 2.1 cm	Injection Molded
36	Screw	Steel	4	Attaches underside plate to deck	0.1	5/32, 0.8 cm	Purchased
37	Screw	Steel	4	used to clamp locking bracket and underside plate to the deck	0.1	5/32, 1.1 cm	Purchased
38	Locking Bracket	Steel	1	Provides locking points for the locking mechanism and connects locking mechanism to the deck	5.9		Machined and Bent
39	Underside Plate	Steel	1	Allows Locking bracket to be connected to the deck	2.2		Machined and Bent

Rear Wheel Subassembly

Part No.	Part Name	Material	Quantity	Function	Weight (oz)	Dimensions	Manufacturing Process
04	Bearing	Steel	2	Allows the wheel to turn smoothly	0.4	ABEC-5	Purchased
05	Bushing	Steel	1	Distributes any horizontal loads between the two bearings and helps keeps both in place	0.1		Extruded
06	Wheel	Urethane and polypropylene	1	Facilitates motion by rotating around the axle	3.4	98mm Diameter	Injection Molded
40	Wheel Bracket	Plastic	2	To attach wheel	0.05		Injection Molded
41	Pin Nut	Steel	1	Acts as the axle for the wheel	0.5	3/16	Purchased
42	Screw	Steel	1	Used to connect the pin nut to the deck	0.2	3/16	Purchased
43	Wheelie Bar Bracket	Steel	2	Holds the wheelie bar in place	1.0		Stamped
44	Screw	Steel	2	Attaches wheelie bar to the wheelie bar brackets	0.1	5/32, 0.8 cm long	Purchased
45	Wheelie Bar	Aluminum	1	Provides a back pivot point making a wheelie a lot easier to perform	0.4		Extruded

Top Tube Subassembly

Part No.	Part Name	Material	Quantity	Function	Weight (oz)	Dimensions	Manufacturing Process	Picture
46	Bottom Tube	Aluminum	1	connects lower tube subassembly to the top tube and allows for telescoping handlebars	5.1		Extruded and Machined
47	Top Tube	Aluminum	1	Connects handlebars to the rest of the scooter.	4.8		Extruded, Welded, Machined

Handle Bar Subassembly

Part No.	Part Name	Material	Quantity	Function	Weight (oz)	Manufacturing Process
48	Handlebar Tube	Aluminum	2	The rigid component of the handlebars which can be connected to the top tube	1.2	Extuded
49	Button Spring	Steel	2	Pushes the button outwards, which allows the handlebar tubes to be attached to the top tube	<0.1	Bent
50	Button	Steel	2	Used with the button spring to keep handlebars attached to the top tube when riding.	<0.1
51	Grip	Foam Rubber	2	Provides a more comfortable grip on the handlebars	0.5	Expansion Molding
52	Side Cap	Plastic	2	Covers sharp edges and provides a place to attach the cord	0.5	Injection Molded
53	Cord	Elastic	1	Keep handle bars attached to frame	<0.1	Purchased

Top Tube Adjustment Subassembly

Part No.	Part Name	Material	Quantity	Function	Weight (oz)	Dimensions	Manufacturing Process
54	Lever	Aluminum	1	Used to tighten collar	0.4		Machined
55	Collar	Aluminum	1	Used to connect top and lower tubes	0.5		Machined
56	Screw	Steel	1	Attaches the lever to the collar	0.4	3.5 cm	Purchased
57	Screw	Steel	1	Used as a stop along with small pin set in top tube to keep top and lower tubes attached	<0.1	M3x5	Purchased
58	Spring	Steel	1	Used with button as the primary way to lock tubes in the extended position	<0.1		Bent
59	Bracket	Plastic	1	Reduces friction so lever can be rotated to tighten screw	<0.1		Injection Molded
60	Bracket	Steel	1	Acts as a washer to distribute loads	<0.1		Extruded and Machined
61	Threaded Spacer	Steel	1	Acts as a nut between the two holes in the lever, attaches lever to the screw.	0.1		Machined

Frame and Brake Subassembly

Part No.	Part Name	Material	Quantity	Function	Weight (oz)	Manufacturing Process
62	Deck	Aluminum	1	Provides a surface to stand on	13.5	Extruded
63	Brake	Steel	1	Contacts wheel to increase friction and bring scooter to a stop	3.3	Bent
64	Nut	Steel	1	used to attach steel rod to the frame	0.1	Purchased
65	Torsional Spring	Steel	1	Keeps brake from touching wheel unless force is applied.	0.2	Bent
66	Rod	Steel	1	acts as a pivot point for the brake	0.4	Purchased
67	Edge Protector	Plastic	1	decorative and covers sharp edges	0.1	Injection Molded

Design for Manufacturing and Assembly Analysis

Key Findings: There was a lot of room for improvement in the manufacturability and assemblability of the competitor's product. The main areas of improvement are minimization of unnecessary parts, standardization of components, creation of multifunctional parts, decreasing of secondary & finishing operations, and ease of handling of parts for assembly. Our competitor's product did excel in simplifying designs as well as choosing easily manufacturable parts and having subassemblies that can be tested separately. For detail on these findings, see the sections below.

Design for Manufacturing

When analyzing our competitor's product, the Razor scooter A2, we found a lot of room for improvement of its manufacturability. In order to minimize the part count, it would be possible to design a collapsing mechanism that uses fewer parts than the current design, which has 18 parts. The plastic covers especially are mostly for decoration, with a secondary purpose of preventing young children from sticking their fingers into the locking mechanism. Even so, they are not essential to the design of the collapsing subassembly, and so only add unnecessary steps to the manufacturing and assembly processes. Throughout the whole product, plastic parts were added instead of using metal finishing processes. While this was resulted in fewer finishing steps, it added steps both in manufacturing and assembly.

The Razor scooter we disassembled also showed opportunities to standardize components, commonize the product line, and standardize design features. A lot of the screws used as fasteners were the same size, but several differed by one size, and a few even switched from Imperial to Metric sizing. By unifying the size and length of screws used, the scooter could take better advantage of economies of scale and utilize fewer tools in the manufacturing process.

Another area for possible improvement with respect to design for manufacture is the creation of multifunctional parts. No parts of the scooter are currently multifunctional, but there is a definite opportunity for the creation of such parts in our redesign. For instance, designing a brake that doubled as a lock for the handlebars when the scooter is in its collapsed position could remove the hassle of the handlebars swinging about loosely when unlocked.

A final place where manufacturability of the scooter could be improved is in its secondary & finishing operations. Every single aluminum piece that is visible on the outside of the scooter has been polished, and a sandpaper sticker was glued onto the deck when it would have been much easier and probably as effective to extend the extruded ribs across the deck of the scooter to add friction.

Despite all these areas for improvement, there were many ways the current design had kept manufacturability in mind, which we will remember as we consider our redesign. Some of the locking mechanisms on the scooter had minimized their part counts to about 2 parts (for example, the handlebar locking mechanisms each consisted of a button and a spring). Similarly, the scooter had some fairly sleek and simple designs, like the braking mechanism which, while not 100% functional, also only consisted of about 4 parts. In terms of ease of fabrication, most of the scooter was made of aluminum, which is easy to manufacture (when the aluminum is recycled) and very easy to machine. Most parts that were not aluminum were plastic, and the few remaining parts were made of steel or rubber. The plastic parts were all colored black by color dyes added to the injection molding process.

Overall, there are a few good designs we will keep in mind during our redesign, but even more opportunities for improvement which we hope to take advantage of in the next phases of our design process.

Design for Assembly

Our product was fairly complicated to disassemble, and in our limited experience attempting to reassemble some of its subassemblies, we discovered much room for improvement in its design. First of all, there were a lot of components for such a small, simple device. Some of these were flashy add-ons for marketing and design purposes, such as the shocks and wheelie bar, but others were useless or not essential to the function of the device, such as the numerous plastic pieces used as covers to hide unfinished parts. As well as removing unnecessary components, another way to minimize the part count is to remove fasteners, and utilize snap fitting or other means of attachment. A lot of screws were used in this device, and as we've discussed, they were already a hindrance for a number of other reasons.

Another area that could be improved upon is the ease of handling of parts for human assembly. There are a lot of ambiguous parts, such as screws and levers, which can be very difficult to tell apart and could easily be unified for easy assembly. Some of these parts are also symmetrical, but only work in one orientation. These parts should be made obviously unsymmetrical, so that it is obvious in which orientation they should be attached to the product. The orientation in which parts are attached is not uniform, either. Many parts have fasteners on multiple sides, and most of these are attached horizontally instead of the ideal attachment direction of straight down. A final cause for concern is that many of the parts of this scooter are assembled inside its small-diameter tubes, which are tight and do not facilitate easy movement or sight.

The main way in which the scooter utilized good design for assembly was its use of subassemblies that can be assembled and tested separately or outsourced. The wheel subassemblies are almost certainly tested and purchased separately, and most other subassemblies, such as the telescoping tubes, brake assembly, and handlebar assembly, can easily be tested without the entire product.

There are many ways to improve the ease of assembly in this product, many of which we will probably explore in the next phases of our project.

Failure Mode and Effect Analysis

In our analysis of the Razor scooter, we identified a number of different potential failure modes in using the competitor product. These failure modes can be found in the table below. This analysis was done using the FMEA method from section 14.5 of Dieter and Schmidt’s Engineering Design. By determining which failure modes have the highest RPN, we can determine which failure modes we need to pay extra attention to while redesigning or creating a new design.

The design of the competitor's product is generally very good from an FMEA standpoint. However, our FMEA showed that the failure of the three areas of most concern with the design of the scooter are the braking system, the axles for the wheels, and the collapsing mechanism. Of these the braking system is the largest problem, because it frequently creates flats on the wheels. This could be solved by redesigning the braking system to prevent or reduce the likely hood of locking the wheels while braking.

The second highest RPN is for the axles, which results from them being an important component of the design as well as being vulnerable to incorrect usage of the scooter. The possible improvements to the axles are limited to improving the materials to increase their strength or clearly labeling the maximum weight that the scooter is designed for.

The collapsing mechanism is an important component and had the third highest RPN value. Possible improvements to the mechanism are mostly limited to redesigning it to use fewer and more durable parts which should make it more reliable.

Item and Function	Failure Mode	Effects of Failure	S	Causes of Failure	O	Design Controls	D	RPN	Recommended Actions
Upper Head Tube (steering)	Pin that keeps tube telescoped fails, collar continues to have no purpose	Handle bars can detach from scooter, could cause crash	7	Stress in pin, low force in collar	1	Perform stress tests on the pin	4	28	Add a warning label on the scooter to keep collar tightened
Upper Head Tube (steering)	Button to lock tube in place sticks or brakes	Tube cannot reach full height	4	Spring fatigue or dirt/mud affecting button or spring	2	Perform fatigue tests on the spring	3	24	Include cleaning instructions in user manual
Collapsing Mechanism (folding for storage)	Spring, lever, or tensioner jams	Collapsing mechanism gets stuck in one position	4	Dirt/mud inside the assembly	3	Guides for the tensioner are designed to keep dirt out of the assembly	3	36	Include cleaning instructions in user manual or reduce the number of components that could get stuck
Collapsing Mechanism (folding for storage)	Spring brakes or comes loose	Collapsing mechanism no longer locks the scooter open or closed	6	Fatigue of the spring or guides failing to keep tensioner aligned	1	Perform fatigue testing on the spring	2	12	none
Axel (allows wheels to rotate)	Axel bends	Wheels will stop rolling smoothly or turning completely	4	Excessive load on the wheels caused by heavy rider or performing tricks	5	Test the effects of fatigue and stress on axles	2	40	Use a stronger material for axles and add a waring for maximum weight.
Wheel Bearings (allows wheels to rotate)	Bearing brakes or jams	wheels stop rotating	6	Damage to bearings in a crash or dirt clogging the bearings	2	Check for damage to bearings and use sealed bearings	1	12	Make bearings easier to replace
Urethane Wheel Tread (traction for the wheel)	Rips, tears, and gouges in the tread	Prevents smooth riding of the scooter	4	Riding on rough terrain	4	Perform tests on the durability of the wheel treads	2	32	Use a stronger material for the wheel treads
Rear Wheel Tread (traction for the wheel & braking)	Flat surfaces formed on the surface of the wheel.	Prevents smooth riding of the scooter	3	Braking too hard and causing rear wheel to lock.	7	Test wear and durability of the rear wheel tread.	3	63	Use a stronger material for the rear wheel tread or redesign the braking system
Lower Tube Subassembly (steering)	Bearing gets jammed	Loose ability to steer scooter	7	Damage to bearing in a crash or dirt clogging the bearing	2	Check for damage to bearings	1	14	Improve the design to better seal the bearing
Collar from Lower Tube Subassembly (steering)	Collar too loose or threads get stripped	Steering becomes difficult or impossible, could result in crash	7	Loosening of screw, over tightening of screw, or damage to the collar	3	Check that collar is not loose	1	21	Include warning that all screws should be tight
Handle Bars (steering)	Elastic cable connecting handle bars brakes	Can lose handle bars	2	Excessive force on elastic cord or knot in cord comes loose	5	Test cord strength	1	10	Do not use a granny knots to connect handles
Handle Bars (steering)	Button connectors stop working	Handle bars won't stay attached	5	Spring fatigue or dirt/mud preventing making it difficult to use	2	Perform fatigue tests on springs	3	30	Make springs easy to clean
Handle Bar Padding (Makes grip on handle bars more comfortable)	Padding gets cut, scratched, or otherwise damaged	Grip becomes less comfortable	1	Not storing scooter properly, crashes, or normal use	5	none	1	5	none
Decorative Plastic End Covers (cover sharp edges)	Plastic covers could fracture or get knocked loose	Some sharp edges could be exposed and product would be less visually appealing	1	Fatigue or damage from normal use	5	Check that end covers are attached	3	15	Remove the end covers since they are mostly unnecessary

Design for Environment

Key Takeaways: Steel is considered the highest contributor for CO2 emissions. Power generation was largest factor in emissions overall. Some potential improvements in design for environment are selecting more environmentally friendly material products, reducing the amount of processes needed, lowering power consumption, and balancing the amount of steel vs. aluminum products

It is extremely important to consider various environmental concerns and constraints of our product, the Razor Scooter. Reverse engineering for Green Product Design (REGPD) is an optimal technique in determining alternative “green” solutions to help reduce the overall environmental impact of our product in addition to a Life Cycle Assessment (LCA), whihc is simply a inventory and impact analysis of the product. A few other goals include but not limit to “reducing or eliminating the use of toxic materials, increasing energy efficiency, reducing the amount of material to perform the same function, extending the life of a product” (Comparini and Cagan, 1998).

Reverse Engineering involves disassembling a product into smaller assemblies and components in order to determine variability of materials, recyclability of materials, reusability, of parts, ease of disassembly, fastening methods, function relations, and areas of improvement (Comparini and Cagan, 1998), which was performed during the dissection activity. An “LCA is an environmental effect of raw materials taken from the environment (inputs) and the waste released back into the environment (outputs) by an industrial system” and contains fours stages: scoping, inventory, impact assessment, and improvement assessment (Comparini and Cagan, 1998).

For the Razor scooter, our definition of purpose is to get potential riders from one destination to the next using a one-foot propelling motion. The stages that the Razor Scooter go through are raw material acquisition, transport, production, distribution, use, and waste management. This specifically includes material selection, manufacturing process reduction, minimal parts and packaging, product efficiency, and reusability.

The Razor Scooter consists mostly of aluminum and steel for the body, urethane for the wheels, which are not necessarily the most environmental friendly, but the most durable when weighing various options. The graphs below illustrate different outputs based on each material in relevance to Greenhouse gases (GHG) and toxic releases. Each graph bases its emissions on $1M worth of economic activity.