Paper towel dispenser
From DDL Wiki
(Difference between revisions)
(→Parts List) |
(→Parts List) |
||
Line 89: | Line 89: | ||
| 20 || Rounded Spring Guide || Angles spring to desired measurement || 1 || <1g || Plastic || Injection molding || [[Image:PTD Rounded Spring Guide.jpg| 100x100px]] | | 20 || Rounded Spring Guide || Angles spring to desired measurement || 1 || <1g || Plastic || Injection molding || [[Image:PTD Rounded Spring Guide.jpg| 100x100px]] | ||
|- | |- | ||
- | | 21 || Thin Paper Guide || Guides paper out of device || 1 || 24g || Plastic || Injection molding || [[Image: | + | | 21 || Thin Paper Guide || Guides paper out of device || 1 || 24g || Plastic || Injection molding || [[Image:PTD Thin Paper Guide.JPG| 100x100px]] |
|- | |- | ||
- | | 22 || Front Spindle Housing || Final housing before paper leaves device || 1 || 132g || Plastic || Injection molding || [[Image: | + | | 22 || Front Spindle Housing || Final housing before paper leaves device || 1 || 132g || Plastic || Injection molding || [[Image:PTD Front Spindle Housing.jpg| 100x100px]] |
|- | |- | ||
- | | 23 || Spindle Housing Back || Back of spindle housing || 1 || 162g || Plastic || Injection molding || [[Image: | + | | 23 || Spindle Housing Back || Back of spindle housing || 1 || 162g || Plastic || Injection molding || [[Image:PTD Back Spindle Housing.jpg| 100x100px]] |
|- | |- | ||
- | | 24 || Spindle Housing (L)|| Left of spindle housing || 1 || 105g || Plastic || Injection molding || [[Image: | + | | 24 || Spindle Housing (L)|| Left of spindle housing || 1 || 105g || Plastic || Injection molding || [[Image:PTD Spindle Housing Left.jpg| 100x100px]] |
|- | |- | ||
- | | 25 || Spindle Housing (R)|| Right of spindle housing || 1 || 105g || Plastic || Injection molding || [[Image: | + | | 25 || Spindle Housing (R)|| Right of spindle housing || 1 || 105g || Plastic || Injection molding || [[Image:PTD Spindle Housing Right.jpg| 100x100px]] |
|- | |- | ||
- | | 26 || White Spindle Guide || Holds spindle in line || 3 || 2.3g each || Plastic || Injection molding || [[Image: | + | | 26 || White Spindle Guide || Holds spindle in line || 3 || 2.3g each || Plastic || Injection molding || [[Image:PTD Spindle Guide.jpg| 100x100px]] |
|- | |- | ||
- | | 27 || Screw (3/32'' x 3/8'' long) || Connects spindle halves || 2 || <1g || Metal || Machined || [[Image: | + | | 27 || Screw (3/32'' x 3/8'' long) || Connects spindle halves || 2 || <1g || Metal || Machined || [[Image:PTD Screw (3-32x3-8)(2).jpg| 100x100px]] |
|- | |- | ||
| 28 || Square nut || For use with 27 || 2 || <1g || Steel || Cast and drilled || [[Image:Example.jpg| 100x100px]] | | 28 || Square nut || For use with 27 || 2 || <1g || Steel || Cast and drilled || [[Image:Example.jpg| 100x100px]] |
Revision as of 12:19, 16 September 2009
Contents |
Executive Summary
Stakeholders
There are five major stakeholders with regards to the paper towel dispenser: Manufacturer, retailer, customer, user, society. The main needs for the manufacturer are to reduce cost and create a reliable product. For the retailer, it is being able to sell a quality product. For the customer, it is making sure it is an affordable and reliable machine. For the customer, cleanliness and ease of use are paramount. Society plays a role with regards to how the use of paper towel affects the ecosystem and earth in general. Listed below are the stakeholders and their respective needs.
Paper Towel Manufacturer
- Material cost
- Manufacturing cost
- Assembly
- Transporting
- Standardize/minimize parts
Retailer
- Cost
- Storage
- Reliability
- Usability
- Transporting
Customer
- Cost
- Mounting
- Ease of use
- Reliability
- Aesthetics
User
- Ease of use / ergonomics
- Speed of operation
- Aesthetics
- Cleanliness
Society
- Environment
Usability Study
Parts List
DFMA Analysis
Design For Manufacture
Design For Assembly
FEMA Analysis
Part No. | Name | Function | Failure Mode | Effects of Failure | S | Causes of Failure | O | Design Controls | D | RPN | Recommended Actions | Responsibility | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
01 | Front Housing | Protects device from exterior | Fractured | text | text | text | text | text | text | text | text | text | |
02 | Front Housing Clip | Holds housings together | Fractured | text | text | text | text | text | text | text | text | text | |
03 | Front Housing Tab | Secures housing clip | Fractured | text | text | text | text | text | text | text | text | text | |
04 | Rear Housing | Holds mechanical components | Fractured | text | text | text | text | text | text | text | text | text | |
05 | Paper Towel Holding Arm | Holds paper towel roll | Bent | text | text | text | text | text | text | text | text | ||
08 | Screw Anchor | Holds screw in wall | Fractured | text | text | text | text | text | text | text | text | text | |
09 | Paper Guide Tube | Guides paper towel to cutting cylinder | Failed | text | text | text | text | text | text | text | text | text | |
10 | Spring (uneven hooks) | Holds 09 in place | Broken | text | text | text | text | text | text | text | text | text | |
11 | Spring (even hooks) | Holds lever to spindle housing | Broken | text | text | text | text | text | text | text | text | text | |
13 | Red Screw Cap | Hides screw in turning wheel | Fractured | text | text | text | text | text | text | text | text | text | |
14 | Locking Spring | Hides screw in turning wheel | Broken | text | text | text | text | text | text | text | text | text | |
15 | SRed Turning Wheel | Turns main spindle | Failed | text | text | text | text | text | text | text | text | text | |
16 | Guide clips for 09 | Guides paper on 09 | text | text | text | text | text | text | text | text | text | ||
18 | Guide clips for 09 | Connects spring to spindle | text | text | text | text | text | text | text | text | text | ||
19 | Spring Connector | text | Connects two springs to lever arm | text | text | text | text | text | text | text | text | ||
20 | Rounded Spring Guide | Angles spring to desired measurement | text | text | text | text | text | text | text | text | text | ||
21 | Thin Paper Guide | text | Guides paper out of device | text | text | text | text | text | text | text | text | ||
22 | Front Spindle Housing | Final housing before paper leaves device | text | text | text | text | text | text | text | text | text | ||
23 | Spindle Housing Back | Back of spindle housing | text | text | text | text | text | text | text | text | text |
DFE Analysis