Low-foam keg tap
From DDL Wiki
(→Design Documentation) |
(→Design Documentation) |
||
| Line 26: | Line 26: | ||
! Manufacturing Process | ! Manufacturing Process | ||
! Image | ! Image | ||
| + | ! CAD drawing | ||
|- | |- | ||
| Line 35: | Line 36: | ||
| Plastic | | Plastic | ||
| Injection molding | | Injection molding | ||
| + | | - | ||
| - | | - | ||
|- | |- | ||
| Line 45: | Line 47: | ||
| Extrusion, machined threads | | Extrusion, machined threads | ||
| [[Image:KegTap_Plunger.jpg]] | | [[Image:KegTap_Plunger.jpg]] | ||
| + | | - | ||
|- | |- | ||
| 2.1 | | 2.1 | ||
| Line 54: | Line 57: | ||
| Extrusion, drilled holes | | Extrusion, drilled holes | ||
| -- | | -- | ||
| + | | - | ||
|- | |- | ||
| 3 | | 3 | ||
| Line 63: | Line 67: | ||
| Injection molding | | Injection molding | ||
| [[Image:KegTap_ORing2.jpg|center]] | | [[Image:KegTap_ORing2.jpg|center]] | ||
| + | | - | ||
|- | |- | ||
| Line 73: | Line 78: | ||
| Extrusion, machined threads | | Extrusion, machined threads | ||
| [[Image:KegTap_CylindricalPlungerCasing.jpg]] | | [[Image:KegTap_CylindricalPlungerCasing.jpg]] | ||
| + | | - | ||
|- | |- | ||
| 5 | | 5 | ||
| Line 82: | Line 88: | ||
| Injection Molding | | Injection Molding | ||
| [[Image:KegTap_ORing3.jpg|center]] | | [[Image:KegTap_ORing3.jpg|center]] | ||
| + | | - | ||
|- | |- | ||
| 6 | | 6 | ||
| Line 91: | Line 98: | ||
| Extrusion, lathe, machined threads | | Extrusion, lathe, machined threads | ||
| [[Image:KepTap_CylindricalTop.jpg|center]] | | [[Image:KepTap_CylindricalTop.jpg|center]] | ||
| + | | - | ||
|- | |- | ||
| 7 | | 7 | ||
| Line 100: | Line 108: | ||
| Extrusion, coiled | | Extrusion, coiled | ||
| [[Image:KepTap_Spring.jpg]] | | [[Image:KepTap_Spring.jpg]] | ||
| + | | - | ||
|- | |- | ||
| 8 | | 8 | ||
| Line 108: | Line 117: | ||
| Stainless Steel | | Stainless Steel | ||
| Extrusion, mill, lathe, drilled holes, machined threads | | Extrusion, mill, lathe, drilled holes, machined threads | ||
| + | | - | ||
| - | | - | ||
|- | |- | ||
| Line 118: | Line 128: | ||
| Injection molding | | Injection molding | ||
| [[Image:KegTap_ORing3.jpg|center]] | | [[Image:KegTap_ORing3.jpg|center]] | ||
| + | | - | ||
|- | |- | ||
| - | |||
| 10 | | 10 | ||
| Lever | | Lever | ||
| Line 128: | Line 138: | ||
| Cast, machined threads | | Cast, machined threads | ||
| [[Image:KegTap_Lever.jpg]] | | [[Image:KegTap_Lever.jpg]] | ||
| + | | - | ||
|- | |- | ||
| 11 | | 11 | ||
| Line 137: | Line 148: | ||
| Injection molding | | Injection molding | ||
| [[Image:KegTap_LeverCasing.jpg]] | | [[Image:KegTap_LeverCasing.jpg]] | ||
| + | | - | ||
|- | |- | ||
| 12 | | 12 | ||
| Line 146: | Line 158: | ||
| Injection molding | | Injection molding | ||
| [[Image:KegTap_WhiteCap.jpg|center]] | | [[Image:KegTap_WhiteCap.jpg|center]] | ||
| + | | - | ||
|- | |- | ||
| 13 | | 13 | ||
| Line 155: | Line 168: | ||
| Extrusion, coiled | | Extrusion, coiled | ||
| [[Image:KegTap_LeverSpring1.jpg]] | | [[Image:KegTap_LeverSpring1.jpg]] | ||
| + | | - | ||
|- | |- | ||
| 14 | | 14 | ||
| Line 164: | Line 178: | ||
| Extrusion, machined threads | | Extrusion, machined threads | ||
| [[Image:KegTap_CenterRod.jpg]] | | [[Image:KegTap_CenterRod.jpg]] | ||
| + | | - | ||
|- | |- | ||
| 15 | | 15 | ||
| Line 173: | Line 188: | ||
| Machined | | Machined | ||
| [[Image:KegTap_Nut2.jpg|center]] | | [[Image:KegTap_Nut2.jpg|center]] | ||
| + | | - | ||
|- | |- | ||
| 16 | | 16 | ||
| Line 182: | Line 198: | ||
| Stamped | | Stamped | ||
| [[Image:KegTap_Washer.jpg|center]] | | [[Image:KegTap_Washer.jpg|center]] | ||
| + | | - | ||
|- | |- | ||
| 17 | | 17 | ||
| Line 191: | Line 208: | ||
| Extrusion, machined | | Extrusion, machined | ||
| [[Image:KegTap_LeverPin.jpg]] | | [[Image:KegTap_LeverPin.jpg]] | ||
| + | | - | ||
|- | |- | ||
| 18 | | 18 | ||
| Line 200: | Line 218: | ||
| (Sand) cast | | (Sand) cast | ||
| [[Image:KegTap_Base.jpg]] | | [[Image:KegTap_Base.jpg]] | ||
| + | | - | ||
|- | |- | ||
| 19 | | 19 | ||
| Line 209: | Line 228: | ||
| Injection molding | | Injection molding | ||
| [[Image:KegTap_ORing1.jpg|center]] | | [[Image:KegTap_ORing1.jpg|center]] | ||
| + | | - | ||
|- | |- | ||
| 20 | | 20 | ||
| Line 218: | Line 238: | ||
| Extrusion | | Extrusion | ||
| [[Image:KegTap_Hose.jpg]] | | [[Image:KegTap_Hose.jpg]] | ||
| + | | - | ||
|- | |- | ||
| 20.1 | | 20.1 | ||
| Line 227: | Line 248: | ||
| Machined | | Machined | ||
| -- | | -- | ||
| + | | - | ||
|- | |- | ||
| 20.2 | | 20.2 | ||
| Line 236: | Line 258: | ||
| Injection molding | | Injection molding | ||
| -- | | -- | ||
| + | | - | ||
|- | |- | ||
| 21 | | 21 | ||
| Line 245: | Line 268: | ||
| Injection molding | | Injection molding | ||
| [[Image:KegTap_Nozzle.jpg]] | | [[Image:KegTap_Nozzle.jpg]] | ||
| + | | - | ||
|- | |- | ||
| 21.1 | | 21.1 | ||
| Line 254: | Line 278: | ||
| Injection molding | | Injection molding | ||
| -- | | -- | ||
| + | | - | ||
|- | |- | ||
| 21.2 | | 21.2 | ||
| Line 263: | Line 288: | ||
| Injection molding | | Injection molding | ||
| -- | | -- | ||
| + | | - | ||
|- | |- | ||
| 21.3 | | 21.3 | ||
| Line 272: | Line 298: | ||
| Extrusion, coiled | | Extrusion, coiled | ||
| -- | | -- | ||
| + | | - | ||
|- | |- | ||
| 21.4 | | 21.4 | ||
| Line 281: | Line 308: | ||
| Injection molding | | Injection molding | ||
| -- | | -- | ||
| + | | - | ||
|- | |- | ||
| 22 | | 22 | ||
| Line 290: | Line 318: | ||
| Thermoforming | | Thermoforming | ||
| [[Image:KegTap_CapSeal.jpg|center]] | | [[Image:KegTap_CapSeal.jpg|center]] | ||
| + | | - | ||
|- | |- | ||
|} | |} | ||
Revision as of 17:46, 4 December 2009
Contents |
Executive Summary
Provide a brief executive summary summarizing your findings and conclusions. In particular, summarize
- Findings from market research justifying need for the new product: Survey distributed; found that users desire a lower foam output, easier pumping mechanism, and more intuitive tap design
- The product's main features, advantages over competitors, and target market: center cylinder redesigned to eliminate 90 degree bend in liquid output (straight tube means less foam), final product will include pressure gauge to prevent overpumping; competing products create more foam; target market is beer distributors and college students
- The most important findings from your product analyses that justify design choices and support your case for the new product.
Market Analysis
Make the case that there exists a market need for your product using market research findings, illustrative pictures, benchmarking against competitors, and identifying your target market. Estimate a ballpark expected price and production volume for the product and compare against expected cost. Determine if the product has high likelihood to be profitable or unprofitable or if more information is needed to determine. Is there enough potential to justify investment in further market research and testing?
Design Documentation
Include assembly drawings with all components labeled as well as a bill of materials defining each component with quantity, material, etc. Include a fully dimensioned CAD drawing for each custom component and a company and part number for each purchased component.
| Part Number | Name | QTY | Weight (oz) | Function | Material | Manufacturing Process | Image | CAD drawing |
|---|---|---|---|---|---|---|---|---|
| 1 | Handle | 1 | 1 | Grip for pumping | Plastic | Injection molding | - | - |
| 2 | Plunger | 2 | 4.3 | Forces air into casing | Stainless Steel | Extrusion, machined threads | 
| - |
| 2.1 | Plunger Disc | 2 | 0.5 | Air tight | Brass | Extrusion, drilled holes | -- | - |
| 3 | Plunger O-Ring | 2 | 0.05 | Seal | Rubber | Injection molding |  | - |
| 4 | Cylindrical Plunger Casing | 2 | 6.3 | Pressure for pumping | Stainless Steel | Extrusion, machined threads | 
| - |
| 5 | Cylindrical Casing O-Ring | 2 | 0.05 | Seal | Rubber | Injection Molding |  | - |
| 6 | Cylindrical Top | 2 | 1.7 | Encloses plunger in casing | Stainless Steel | Extrusion, lathe, machined threads |  | - |
| 7 | Plunger Spring | 2 | 0.1 | Prevents plunger from getting stuck | Stainless Steel | Extrusion, coiled | 
| - |
| 8 | Center Cylinder | 1 | - | Separates air input from beer output | Stainless Steel | Extrusion, mill, lathe, drilled holes, machined threads | - | - |
| 9 | Center Cylinder O-Ring | 1 | 0.05 | Seal | Rubber | Injection molding | | - |
| 10 | Lever | 1 | 4.1 | Attaches tap to keg | Steel | Cast, machined threads | 
| - |
| 11 | Lever Casing | 1 | 0.5 | Provides grip for user to pull lever up | Plastic | Injection molding | 
| - |
| 12 | White Cap | 1 | 0.1 | Prevents nut from potentially falling off | Plastic | Injection molding |  | - |
| 13 | Lever spring | 1 | 0.1 | Provides compression that enables lever to lock in place | Stainless steel | Extrusion, coiled | 
| - |
| 14 | Center Rod | 1 | 0.5 | Locks lever into machined groove on base | Brass | Extrusion, machined threads | 
| - |
| 15 | Nut | 1 | 0.05 | Attaches center rod to lever casing | Steel | Machined |  | - |
| 16 | Washer | 1 | 0.05 | Distributes force of nut | Steel | Stamped |  | - |
| 17 | Lever Pin | 1 | 0.2 | Holds lever on base | Steel | Extrusion, machined | 
| - |
| 18 | Base | 1 | 7.2 | Attaches to keg | Steel | (Sand) cast | 
| - |
| 19 | Base O-Ring | 1 | 0.1 | Seal | Rubber | Injection molding |  | - |
| 20 | Hose | 1 | 2.7 | Transfers beer from keg to cup | Plastic | Extrusion | 
| - |
| 20.1 | Connector | 1 | -- | Connects hose to center cylinder | Brass | Machined | -- | - |
| 20.2 | Spout | 1 | -- | Connects hose to nozzle | Plastic | Injection molding | -- | - |
| 21 | Nozzle Sub-assembly | 1 | 0.4 | Releases beer from hose | Plastic | Injection molding | 
| - |
| 21.1 | Handle | 1 | -- | Provides leverage to compress the spring, opening the seal and releasing beer | Plastic | Injection molding | -- | - |
| 21.2 | White Plastic Center | 1 | -- | Connects nozzle handle to the cap seal | Plastic | Injection molding | -- | - |
| 21.3 | Spring | 1 | -- | Keeps handle down when nozzle not in use | Steel | Extrusion, coiled | -- | - |
| 21.4 | Hard Plastic Cap | 1 | -- | Attaches lever to nozzle base | Plastic | Injection molding | -- | - |
| 22 | Nozzle Seal | 1 | -- | Prevents beer from exiting nozzle until handle is lifted | Rubber | Thermoforming |  | - |
House of Quality
Provide a complete house of quality table to summarize your design choices, targets, relationships, and benchmarking against the competition. Highlight major findings and conclusions.
Design Analysis
Report on conclusions and recommendations from your DFMA, FMEA, and DFE findings for your product, and benchmark against the competition. Highlight major findings in the report and provide data in the appendix.
Mechanical Analysis
Clearly state the purpose of the analysis, methods and assumptions. Define all symbols, and provide a free body diagram, if applicable. Summarize conclusions and implications for you design, and explain how the analysis serves to justify your design choices.
Prototype Documentation
Document your final prototype, explain what it demonstrates about your design, and clearly identify differences between your prototype and final design intended for mass production. Summarize findings from user testing and user feedback.
Design Process
Include a short section documenting your team design process for scheduling, coordinating, and completing tasks. Identify individual team member roles, responsibilities, and contributions. Assess the state of the product. Is the design ready for production? If not, what are the next steps (eg. more testing, quantitative market research)?
Appendix
Include Design analysis data here.
