Drink Cooler Innovation
From DDL Wiki
(Difference between revisions)
(→Bill of Materials) |
|||
| Line 34: | Line 34: | ||
| align="center" | ABS Plastic | | align="center" | ABS Plastic | ||
| align="center" | Injection Molding | | align="center" | Injection Molding | ||
| - | | | | + | | | [[Image:Outer_Housing.png | 100x100px]] |
|- | |- | ||
Revision as of 02:22, 6 May 2012
Executive Summary
Market Analysis
Bill of Materials
| Part Number | Part | Function | Number of parts | Weight (/unit in g) | Material | Manufacturing Process | Images |
| 1 | Inner Housing | Provides surface for attaching components | 1 | 340.2 | ABS Plastic | Injection Molding | 
|
| 2 | Outer Housing | Provides external façade | 1 | 834.6 | ABS Plastic | Injection Molding | 
|
| 3 | Lid | Keeps device closed during operation | 1 | 158.8 | ABS Plastic | Injection Molding | |
| 4 | Motor | Powers the flow of water and the rotation of the rod | 1 | 173 | Assembled | Purchased Part | |
| 5 | Upper Motor Housing | Houses the motor | 1 | 86.2 | PVC Rigid | Injection Molding | |
| 6 | Lower Motor Housing | Houses the motor | 1 | 45.4 | PVC Rigid | Injection Molding | |
| 7 | Block with Channels | Provides turbulent flow to water | 1 | 68 | 1060 Alloy | Machining | |
| 8 | Peltier Cell | Provides thermo-electric cooling | 2 | 25 | Assembled | Purchased Part | |
| 9 | Copper Plate 1 | Attached to aluminium channels and peltier cells | 1 | 285.8 | Copper | Machining | |
| 10 | Copper Plater 2 | Attached to peltier cells and heat sink | 1 | 72.6 | Copper | Machining | |
| 11 | Heat Sink | Removes heat from peltier cells | 1 | 50 | Assembled | Purchased Part | |
| 12 | Heat Sink Mount | Provides platform to mount heat sink | 1 | 40.8 | ABS Plastic | Machining | |
| 13 | Fan | Aids heat sink in heat removal from peltier cells | 1 | 20 | Assembled | Purchased Part | |
| 14 | Rotating Arm | Rotates drink container | 1 | 9.1 | ABS Plastic | Injection Molding | |
| 15 | Rotating Arm Holder | Holds the rotating arm in place | 1 | 15 | ABS Plastic | Injection Molding | |
| 16 | Rotating Arm Bands | Provides friction on rotating arm | 5 | <1 | Rubber | Purchased Part | |
| 17 | Spout | Provides output for water flow | 1 | 4.5 | ABS Plastic | Injection Molding | |
| 18 | Tubing | Connects aluminium bloack to motor housing | 1 | 4.5 | ABS Plastic | Purchased Part | |
| 19 | Dial | Provides means to adjust timer | 1 | 9.1 | ABS Plastic | Injection Molding | |
| 20 | Circuit Board | Contains product's circuitry | 1 | 0 | Assembled | Purchased Part | |
| 21 | Adapter, Tube to Male Threaded Pipe | Provides connections for both ends of the tubing | 2 | <1 | Nylon | Purchased Part | |
| 22 | Pan Head Philips | Fastener | 18 | <1 | Steel | Purchased Part | |
| 23 | Flate Head Phillips | Fastener | 8 | <1 | Steel | Purchased Part |
