Soda gun
From DDL Wiki
(Difference between revisions)
(→Bill of Materials) |
(→Bill of Materials) |
||
Line 18: | Line 18: | ||
|- | |- | ||
|1 | |1 | ||
- | |"Round head 1/2 | + | |"Round head 1/2" Length 1/8th" Dia Phillips" |
|2 | |2 | ||
|<1 | |<1 | ||
Line 68: | Line 68: | ||
|- | |- | ||
|6 | |6 | ||
- | |"Flat head 3/8 | + | |"Flat head 3/8" len 1/8" dia philips" |
|2 | |2 | ||
|<1 | |<1 | ||
Line 118: | Line 118: | ||
|- | |- | ||
|11 | |11 | ||
- | |"Round head 1 | + | |"Round head 1" len 1/8" dia flat screw" |
|2 | |2 | ||
|<1 | |<1 | ||
Line 128: | Line 128: | ||
|- | |- | ||
|12 | |12 | ||
- | |"Round head 1/2 | + | |"Round head 1/2" len, 1/8" dia flat screw" |
|2 | |2 | ||
|<1 | |<1 | ||
Line 138: | Line 138: | ||
|- | |- | ||
|13 | |13 | ||
- | |"Hexagon, 7/8 | + | |"Hexagon, 7/8" len, 1/8" dia threaded head (Recieves Part #11)" |
|2 | |2 | ||
|<1 | |<1 | ||
Line 168: | Line 168: | ||
|- | |- | ||
|16 | |16 | ||
- | |"Round head, 3/8 | + | |"Round head, 3/8" len, 1/8" dia, philips screw" |
|5 | |5 | ||
|<1 | |<1 | ||
Line 188: | Line 188: | ||
|- | |- | ||
|18 | |18 | ||
- | |"Custom screw, 1/2 | + | |"Custom screw, 1/2" len, 1/8" dia, flat head" |
|1 | |1 | ||
|<1 | |<1 | ||
Line 208: | Line 208: | ||
|- | |- | ||
|20 | |20 | ||
- | |"O-ring, rubber, red 1/4 | + | |"O-ring, rubber, red 1/4" dia" |
|12 | |12 | ||
|<1 | |<1 | ||
Line 228: | Line 228: | ||
|- | |- | ||
|22 | |22 | ||
- | |"Small spring, 1/2 | + | |"Small spring, 1/2" len" |
|12 | |12 | ||
|<1 | |<1 | ||
Line 238: | Line 238: | ||
|- | |- | ||
|23 | |23 | ||
- | |"O-ring, rubber, red, 1/8 | + | |"O-ring, rubber, red, 1/8" dia" |
|12 | |12 | ||
|<1 | |<1 | ||
Line 278: | Line 278: | ||
|- | |- | ||
|27 | |27 | ||
- | |"Black, O-ring, rubber, 1 | + | |"Black, O-ring, rubber, 1" dia" |
|1 | |1 | ||
|<1 | |<1 | ||
Line 340: | Line 340: | ||
|- | |- | ||
|33 | |33 | ||
- | |"flat top, 1 | + | |"flat top, 1" len, 1/4" dia, philips head screw" |
|4 | |4 | ||
|3 (ea) | |3 (ea) | ||
Line 390: | Line 390: | ||
|- | |- | ||
|38 | |38 | ||
- | |"Shut-off screw o-ring 1/4 | + | |"Shut-off screw o-ring 1/4" dia, rubber" |
|10 | |10 | ||
|<1 | |<1 | ||
Line 410: | Line 410: | ||
|- | |- | ||
|40 | |40 | ||
- | |"Flow adjustment screw o-ring, 1/4 | + | |"Flow adjustment screw o-ring, 1/4" dia, rubber" |
|10 | |10 | ||
|<1 | |<1 | ||
Line 420: | Line 420: | ||
|- | |- | ||
|41 | |41 | ||
- | |"Housing retaining pin 1 | + | |"Housing retaining pin 1", 5/32" dia" |
|2 | |2 | ||
|4 | |4 | ||
Line 511: | Line 511: | ||
|- | |- | ||
|50 | |50 | ||
- | |"O-ring, rubber, 3/8 | + | |"O-ring, rubber, 3/8" dia, black" |
|10 | |10 | ||
|<1 | |<1 |
Revision as of 19:23, 30 January 2014
Executive Summary
Bill of Materials
Part # | Part Name | QTY | Weight (g) | Function | Material | Manufacturing | Image |
---|---|---|---|---|---|---|---|
Soda Gun Sub-Assembly | |||||||
1 | "Round head 1/2" Length 1/8th" Dia Phillips" | 2 | <1 | Fastens button panel | Stainless Steel | Std Purchase Part | |
2 | Elliptical Soda Button (Top) | 2 | <1 | User input button for soda, designates type | Plastic | Injection Molded | |
3 | Eliptical Soda Button (Bot) | 2 | <1 | Translates input key foce to release soda | Plastic | Injection Molded | |
4 | Circle Soda Button (Top) | 8 | <1 | User input button for soda, designates type | Plastic | Injection Molded | |
5 | Circle Soda Button (Bot) | 8 | <1 | Translates input key foce to release soda | Plastic | Injection Molded | |
6 | "Flat head 3/8" len 1/8" dia philips" | 2 | <1 | Fastens panel to gun body | Stainless Steel | Std Purchase Part | |
7 | Plastic Washer (For Part #6) | 2 | <1 | Spacing | Plastic | Injection Molded | |
8 | Small Butterfly Cliip | 2 | <1 | Aligns button to pin valves | Stainless Steel | Die Cast, punched | |
9 | Large Butterfly Clip | 2 | <1 | Aligns button to pin valves | Stainless Steel | Die Cast, punched | |
10 | Button Panel, blue, 10 button | 1 | 12 | Holds all buttons in place | Plastic | Injection Molded | |
11 | "Round head 1" len 1/8" dia flat screw" | 2 | <1 | Fastened gun to hose base | Stainless Steel | Std Purchase Part | |
12 | "Round head 1/2" len, 1/8" dia flat screw" | 2 | <1 | Fastened gun to hose base | Stainless Steel | Std Purchase Part | |
13 | "Hexagon, 7/8" len, 1/8" dia threaded head (Recieves Part #11)" | 2 | <1 | Fastened gun to hose base | Stainless Steel | Std Purchase Part | |
14 | Nozzle caps, clear plastic | 10 | <1 | Reduces hose diameter into gun base | Plastic | Injection Molded | |
15 | O-ring, rubber | 10 | <1 | Seals hose to gun base | Rubber | Std Purchase Part | |
16 | "Round head, 3/8" len, 1/8" dia, philips screw" | 5 | <1 | Fasten back panel to gun | Stainless Steel | Std Purchase Part | |
17 | Back panel, blue | 1 | 6 | Provides grip to back of gun, aesthetic | Plastic | Injection Molded | |
18 | "Custom screw, 1/2" len, 1/8" dia, flat head" | 1 | <1 | Supports back panel | Stainless Steel | Std Purchase Part | |
19 | Rubber o-ring for Part #18 | 1 | <1 | Seals screw, provides snug fit | Rubber | Std Purchase Part | |
20 | "O-ring, rubber, red 1/4" dia" | 12 | <1 | Seals valve assy | Rubber | Std Purchase Part | |
21 | Clear plastic spring cap | 12 | <1 | Caps spring (Part #22) | Plastic | ||
22 | "Small spring, 1/2" len" | 12 | <1 | Translates input to opening valve, reset valv when released | Stainless Steel | Std Purchase Part | |
23 | "O-ring, rubber, red, 1/8" dia" | 12 | <1 | Seals (Part #24) to valve assy | Rubber | Std Purchase Part | |
24 | Pin | 12 | <1 | Holds valve in place, allows for vertical motion | Stainless Steel | Std Purchase Part | |
25 | Plastic valve | 12 | <1 | Glued to pin, opens/closes each syrup line | Plastic | Injection Molded | |
26 | Soda gun Nozzle, plastic, blue | 1 | 13 | Focuses final soda dispense | Plastic | Injection Molded | |
27 | "Black, O-ring, rubber, 1" dia" | 1 | <1 | Seals nozzle head to gun | Rubber | Std Purchase Part | |
28 | Soda gun body | 1 | 113 | Directs and organizes flow for all fluids exiting soda gun | Plastic | Machined in five layers, irreversibly sealed together, post-drilled | |
29 | Soda gun nozzle base | 1 | 10 | Creates central location for syrup+soda to mix and exit gun | Plastic | Turned, glued to soda gun body | |
30 | Soda gun nozzle base retaining pins | 2 | <1 | Create fixture points for nozzle base | Stainless Steel | Turned | |
31 | Stickers (misc.) | 12 | <1 | Provides information and instructions about product, barcodes, safety information use, and beverage types | Paper | Printed | |
Flow Regulator Sub-Assembly | |||||||
32 | Plastic Regulator Backing | 1 | 41 | Hold tubes to regulator | Plastic | Injection Molded | |
33 | "flat top, 1" len, 1/4" dia, philips head screw" | 4 | 3 (ea) | Fastens regulator casing together | Stainless Steel | Std Purchase Part | |
34 | Tube retainer, retaining clips | 20 | <1 | Retain the tube retainers to base | Stainless Steel | Std Purchase Part | |
35 | Tube housing, main body | 1 | 46 | Holds the tube housing | Plastic | Injection Molded | |
36 | Tube housing, single holder | 10 | 6 | Connects two sides of tubes | Plastic | Injection Molded | |
37 | Shut-off screw | 10 | <1 | Shuts off soda flow | Plastic | Injection Molded | |
38 | "Shut-off screw o-ring 1/4" dia, rubber" | 10 | <1 | Seals shut-off screws | Rubber | Std. Purchase Part | |
39 | Flow adjustment screw | 10 | <1 | Adjusts syrup/water ratio | Plastic | Injection Molded | |
40 | "Flow adjustment screw o-ring, 1/4" dia, rubber" | 10 | <1 | Seals adjustment screw | Rubber | Std. Purchase Part | |
41 | "Housing retaining pin 1", 5/32" dia" | 2 | 4 | Holds tube housing halves together | Stainless Steel | Cut to length | |
42 | Pivot pin for separating mechanism | 1 | <1 | Creates pivot point for half separator of plastic reg. housing | Stainless Steel | Cut to length | |
43 | Plastic regulator fronting | 1 | 63 | Hold tubes to regulator | Plastic | Injection Molded | |
44 | Cap of separating mechanism, white | 1 | <1 | User interaction point for separator mechanism | Plastic | Injection Molded | |
45 | Cap of separating mechanism rivot | 1 | <1 | Held cap to main separating body | Stainless Steel | Turned/Lathed | |
46 | Main separator body | 1 | 5 | Separates the halves | Plastic | Injection Molded | |
Small Tube Sub-Assembly | |||||||
47 | Small Eaton Synflex Tubing (4203-0400) | 10 | 11 | Carries syrup to gun | Plastic | Std. Purchase Part | |
48 | Plastic Hose Clamping Ring | 10 | <1 | Connects syrup tubing to end cap | Plastic | Injection Molded | |
49 | Ridged End-Cap | 10 | <1 | Connects tubing to dispensing system | Plastic | Injection Molded | |
50 | "O-ring, rubber, 3/8" dia, black" | 10 | <1 | Seals end cap | Rubber | Std. Purchase Part | |
51 | Plastic, anti-friction ring | 1 | 1 | Prevents metal casing from cutting tubing | Plastic | Injection Molded | |
52 | Outer tubing casing, metal | 1 | 200 | Gathers all tubes, protects against wear, allows for flexible movement | Stainless Steel | Std. Purchase Part | |
53 | Soda gun base connector | 1 | 11 | Connects handheld gun to the tubing casing | Plastic | Injection Molded | |
54 | Tubing holding plate | 1 | 10 | Holds all tubes in correct positions for handheld gun | Stainless Steel | Cut, stamped | |
Large Tube Sub-Assembly | |||||||
55 | Rev-Flex P-E Hose | 10 | 63 | Carries liquid from source to soda gun assembly | Plastic | Std. Purchase Part | |
56 | Hose clamp | 10 | 2 | Fastens metal hose cap to hose | Stainless Steel | Std. Purchase Part | |
57 | O-ring, rubber, black | 10 | <1 | Seals threaded hose cap to assembly | Rubber | Std. Purchase Part | |
58 | Hose cap, metal | 10 | 7 | Allows liquid to flow from one tubing to another | Stainless Steel | Machined |