Part # | Part Name | Quantity | Weight (grams) | Function | Manufacturing Process | Picture
|
1
| Motor Connection Nut | 1 | 6 | Holds the entire wiper assembly to the motor | Cast |
|
2
| Motor Connection Link (1L) | 1 | 62 | Link connecting the spinning motor to Link 1 | Cast, with the knob pressed into it |
|
3
| Link 1 (LN3) | 1 | 158 | | Cast, with the knobs pressed into it |
|
4
| Rubber Connections | 2 | Unable to detach | Caps on Link 1 that are used to attach to the metal knobs in the connection links | Injection molded and pressed onto the link |
|
| WIPER CONNECTION SUBASSEMBLY 1 | | | | |
|
5
| | Rubber cap | 1 | 0 | Rubber cap that goes over the wiper connection point in the subassembly | Injection molded, loose fit |
|
6
| | Hex Screws | 3 | 7 (#7+#8) | Screw to bolt wiper connection subassembly into car | Cast |
|
7
| | Washers | 3 | 7 (#7+#8) | Washers to go with hex screws | Cast |
|
8
| | Rubber thermal mount | 1 | 31 | Rubber around subassembly to allow for mounting | Injection Molded |
|
| | RIGID SUBASSEMBLY | | | All pieces in this subassembly are still attached together and therefore do not have individual pictures. We determined the components by observations | |
|
9
| | | 7L Link | 1 | | Connection to N2 Link 2, which causes the wipers to move | Cast, with the metal pin pressed in |
|
10
| | | Pin | 1 | | Pin that acts as the connection point to N2 Link 2 | Cast, pressed into 7L Link |
|
11
| | | Press Fit Ring | 1 | | Ring around the cylindrical shaft | Molded, press fit onto shaft |
|
12
| | | Washer | 1 | | Washer around shaft | Cast |
|
13
| | | Cylindrical Rings | 2 | | Two metal rings around the shaft of the assembly that allows for rotations, act like bearings | Cast, loose fit atop grease to allow for rotation |
|
14
| | | Cap | 1 | | Cap on top of shaft that holds the shaft pieces together | Cast, press fit together with shaft |
|
15
| N2 Link 2 | 1 | 255 | Link which rotates both wipers with rubber connectors at each end | Cast with pressed on injection molded rubber connectors |
|
| WIPER CONNECTION SUBASSEMBLY 2 | | | | |
|
16
| | Rubber cap | 1 | 0 | Rubber cap that goes over the wiper connection point in the subassembly | Injection molded, loose fit |
|
17
| | Hex Screws | 3 | 7 (#7+#8) | Screw to bolt wiper connection subassembly into car | Cast |
|
18
| | Washers | 3 | 7 (#7+#8) | Washers to go with hex screws | Cast |
|
19
| | Rubber thermal mount | 1 | 31 | Rubber around subassembly to allow for mounting | Injection Molded |
|
| | RIGID SUBASSEMBLY | | | All pieces in this subassembly are still attached together and therefore do not have individual pictures. We determined the components by observations | |
|
20
| | | Straight Bar Link | 1 | | Connection to N2 Link 2, which causes the wipers to move | Cast, with the metal pin pressed in |
|
21
| | | Pin | 1 | | Pin that acts as the connection point to N2 Link 2 | Cast, pressed into 7L Link |
|
22
| | | Press Fit Ring | 1 | | Ring around the cylindrical shaft | Molded, press fit onto shaft |
|
23
| | | Washer | 1 | | Washer around shaft | Cast |
|
24
| | | Cylindrical Rings | 2 | | Two metal rings around the shaft of the assembly that allows for rotations, act like bearings | Cast, loose fit atop grease to allow for rotation |
|
25
| | | Cap | 1 | | Cap on top of shaft that holds the shaft pieces together | Cast, press fit together with shaft |
|
26
| Wiper Nut | 1 | 5 | | Cast |
|
| WIPER ARM SUBASSEMBLY | 2 | | | |
|
27
| | Hose | 1 | 5 | Rubber hose that transfers wiper fluid to the sprayer | Injection molded |
|
28
| | Nozzle | 1 | 2 | Nozzle that sprays wiper fluid on windshield | Injection Molded |
|
30
| | Spring | 1 | 24 | Spring that keeps wipers pressed against windshield | Cast steel wound into spring shape |
|
31
| | Spring Connector | 1 | 0 | Connector between the spring and the wiper arm | Cast |
|
| | WIPER ARM SKELETON SUBASSEMBLY | | 255 | | |
|
32
| | | Link | 1 | | Main link that runs along the entire subassembly, everything is connected to it | Cast |
|
33
| | | Base Arm | 1 | | Arm attached to the link | Cast |
|
34
| | | Extension Arm | 1 | | Arm extending out of base arm, attaches to wiper blade | Molded, pressed into base arm with tabs |
|
35
| | | Tip | 1 | | ?? | Cast | [[Image:|100 px]]
|
36
| | | Conection metal Pin | 2 | | Piece that connects into wiper blade | Cast |
|
| WIPER BLADE SUBASSEMBLY | 2 | | | |
|
37
| | Metal Blade | 2 | 10 | Metal links that keep the rubber blade in its holder | Stamped |
|
38
| | Rubber Wiper | 1 | 21 | Rubber piece that wipes the windshield | Injection Molded |
|
| | BLADE SUBASSEMBLY | | 255 | | |
|
39
| | | Metal Base | 1 | | Base that all parts are connected to | Cast |
|
40
| | | Plastic Parts | 4 | | Moveable plastic links that connect to the base and allow the blade to be slightly flexible | Injection Molded |
|
41
| | | Plastic Locking Mechanism | 1 | | Mechanism that locks the Wiper into the wiper arm | Injection Molded |
|