From DDL Wiki
(Difference between revisions)
|
|
Line 32: |
Line 32: |
| | | |
| |} | | |} |
| + | |
| + | |
| + | Go back to [[Car jack]] |
Revision as of 23:49, 28 January 2007
Dissection Process
Bill of Materials
Part # | Part Name | Qty. | Weight(oz.) | Function | Material | Manufacturing Process | Images
|
0001 | Base | 1 | 14.7 | Connection point for lower arms, supports jack against ground | Steel, powder coated | Stamped and bent | ![](/ddl/images/thumb/Team8_Base_bot.JPG/50px-Team8_Base_bot.JPG) ![](/ddl/images/thumb/Team8_Base_top.JPG/50px-Team8_Base_top.JPG)
|
0002 | Lower Arm | 2 | 12.2 | Lower part of 4-bar linkage that makes up jack | Steel, powder coated | Stamped and bent | ![](/ddl/images/thumb/Team8_Low_Arm_bot.JPG/50px-Team8_Low_Arm_bot.JPG) ![](/ddl/images/thumb/Team8_Low_Arm_top.JPG/50px-Team8_Low_Arm_top.JPG)
|
0003 | Upper Arm | 2 | 12.2 | Upper part of 4-bar linkage that make up jack | Steel, powder coated | Stamped and bent | ![](/ddl/images/thumb/Team8_Up_Arm_bot.JPG/50px-Team8_Up_Arm_bot.JPG) ![](/ddl/images/thumb/Team8_Up_Arm_top.JPG/50px-Team8_Up_Arm_top.JPG)
|
0004 | Top | 1 | 6.2 | Connects upper arms, links 4-bar linkage, connection point and support for vehicle | Steel, powder coated | Stamped and bent | ![](/ddl/images/thumb/Team8_Top_botv.JPG/50px-Team8_Top_botv.JPG) ![](/ddl/images/thumb/Team8_Top_topv.JPG/50px-Team8_Top_topv.JPG)
|
0005 | Left Pin | 1 | 6.0 | Tapped with matching thread to hold and allow threaded rot to rotate, also connects lower and upper left arms | Steel | | ![](/ddl/images/thumb/Team8_left_pin.JPG/50px-Team8_left_pin.JPG)
|
0006 | Right Pin | 1 | 5.7 | Acts as a top for thrust bearing, connects right lower and upper arms, holds in position and serves as a guide for threaded rod | Steel | | ![](/ddl/images/thumb/Team8_right_pin.JPG/50px-Team8_right_pin.JPG)
|
0007 | Threaded Rod | 1 | 15.6 | Acme threaded rod, with eyelet at the end, when rotated pulls sides together providing upward motion and force | Steel | | ![](/ddl/images/thumb/Team8_thread.JPG/50px-Team8_thread.JPG)
|
0008 | Collar | 1 | 1 | Serves as a stop for the threaded rod, keeps it from overturning | Steel | |
|
0009 | Thrust Bearing | 1 | 1 | Allows rod to rotate under force, keeps jack working when threaded rod is under force from the car | Steel | |
|
0010 | Lower Pin | 2 | 1.2 | Acts as a pivot point, secures lower arms to base, longer than upper pins | Steel | |
|
0011 | Upper Pin | 2 | 1 | Acts as a pivot point, secures upper arms to top, shorter than lower pins | Steel | |
|
0012 | Crank Arm | 1 | 11.7 | Lever arms used to rotate threaded rod | Steel | |
|
Go back to Car jack