Paintball marker
From DDL Wiki
(Difference between revisions)
(→'''Components''') |
(→'''Components''') |
||
Line 96: | Line 96: | ||
! 000 | ! 000 | ||
- | | Misc. Parts: Screws, nuts, pins, washers, o-rings || ALL || n/a || 1. Used for holding assemblies and parts in place 2. O-rings used for airseals 3. Lubricant used for wear protection and fluidity || Rubber/Silicon o-rings, steel screws, nuts, and other parts || Milled nut fittings for grip, purchased various other parts || image | + | | Misc. Parts: Screws, nuts, pins, washers, o-rings || ALL || n/a || '''1.''' Used for holding assemblies and parts in place '''2.''' O-rings used for airseals '''3.''' Lubricant used for wear protection and fluidity || Rubber/Silicon o-rings, steel screws, nuts, and other parts || Milled nut fittings for grip, purchased various other parts || image |
|- | |- | ||
! 01 | ! 01 | ||
- | | Barrel || n/a || 1 || 1. Direct ball after exiting marker 2. Cause pressure gradient decreasing paintball deformation 3. Unscrews for easy cleaning || Anodized Aluminum || Turned on Lathe, Drilled out porting, Milled for aesthetics || image | + | | Barrel || n/a || 1 || '''1.''' Direct ball after exiting marker '''2.''' Cause pressure gradient decreasing paintball deformation '''3.''' Unscrews for easy cleaning || Anodized Aluminum || Turned on Lathe, Drilled out porting, Milled for aesthetics || image |
|- | |- | ||
! 02 | ! 02 | ||
- | | Barrel Shroud || n/a || 1 || 1. Aesthetics 2. Shields barrel/body connection area || Plated Aluminum || Turned on Lathe and Milled || image | + | | Barrel Shroud || n/a || 1 || '''1.''' Aesthetics '''2.''' Shields barrel/body connection area || Plated Aluminum || Turned on Lathe and Milled || image |
|- | |- | ||
! 03 | ! 03 | ||
- | | Sight Rail with Beaver Tail || n/a || 1 || 1. Provides a reference for aiming in a straight line 2. Protects user from moving bolt 3. Aesthetics 4. Shields Bolt || Anodized Aluminum || Extruded and Milled to final shape || image | + | | Sight Rail with Beaver Tail || n/a || 1 || '''1.''' Provides a reference for aiming in a straight line '''2.''' Protects user from moving bolt '''3.''' Aesthetics '''4.''' Shields Bolt || Anodized Aluminum || Extruded and Milled to final shape || image |
|- | |- | ||
! 04 | ! 04 | ||
- | | Main Body || n/a || 1 || 1. Houses bot, striker, and valve sub-assemblies 2. Provides adapters for barrel, hopper, grip frame, ball detent, sight rail, and air system 3. Window to view movement of bolt 4. Color and milling for aesthetics || Anodized Aluminum || Aluminum Extrusion, Milling and Drilled Holes, Welded on Powerfeed, Reamed inner bores || image | + | | Main Body || n/a || 1 || '''1.''' Houses bot, striker, and valve sub-assemblies '''2.''' Provides adapters for barrel, hopper, grip frame, ball detent, sight rail, and air system '''3.''' Window to view movement of bolt '''4.''' Color and milling for aesthetics || Anodized Aluminum || Aluminum Extrusion, Milling and Drilled Holes, Welded on Powerfeed, Reamed inner bores || image |
|- | |- | ||
! 05 | ! 05 | ||
- | | Trigger Frame & Grip || Trigger Frame & Grip || 1 || 1. Attaches directly to main body 2. Double trigger for increased fire rate 3. Trigger guard to prevent accidental trigger pull 4. Grip provides stability for holding marker 5. Internals control bolt release 6. Holds attachment for drop forward and grip covers || Aluminum Alloy frame and trigger, Steel pins and levers, wire springs || Diecast frame and trigger with finish drilling and machining, milled levers, ground pins, press fit pins for assembly || image | + | | Trigger Frame & Grip || Trigger Frame & Grip || 1 || '''1.''' Attaches directly to main body '''2.''' Double trigger for increased fire rate '''3.''' Trigger guard to prevent accidental trigger pull '''4.''' Grip provides stability for holding marker '''5.''' Internals control bolt release 6. Holds attachment for drop forward and grip covers || Aluminum Alloy frame and trigger, Steel pins and levers, wire springs || Diecast frame and trigger with finish drilling and machining, milled levers, ground pins, press fit pins for assembly || image |
|- | |- | ||
! 06 | ! 06 | ||
- | | .45 Grip Covers || Trigger Frame & Grip || 2 || 1. Attach to grip frame 2. Provide a rough grip 3. Hold drop froward nuts in place || Rubber || Injection Molded rubber || image | + | | .45 Grip Covers || Trigger Frame & Grip || 2 || '''1.''' Attach to grip frame '''2.''' Provide a rough grip '''3.''' Hold drop froward nuts in place || Rubber || Injection Molded rubber || image |
|- | |- | ||
! 07 | ! 07 | ||
- | | Mini Drop Forward || Trigger Frame & Grip and Tank Adapter || 1 || 1. Attaches the tank adapter to the grip frame 2. Centers weight by moving tank forward 3. Milled for aesthetics and decreased weight 4. Lowers tank on marker || Anodized Aluminum || Milled and Polished, Drilled Holes || image | + | | Mini Drop Forward || Trigger Frame & Grip and Tank Adapter || 1 || '''1.''' Attaches the tank adapter to the grip frame '''2.''' Centers weight by moving tank forward '''3.''' Milled for aesthetics and decreased weight '''4.''' Lowers tank on marker || Anodized Aluminum || Milled and Polished, Drilled Holes || image |
|- | |- | ||
! 08 | ! 08 | ||
- | | | + | | Regulator/Expansion Chamber Assembly || Tank Adapter || 1 || '''1.''' Transports air from tank to vertical adapter '''2.''' Expansion chamber allows liquid CO<sub>2</sub> to change to gas '''3.''' Regulator controls flow from tank '''4.''' Expansion chamber provides a front grip || Anodized Aluminum, Steel Fittings, Plastic Macroline hose, Pressure Gauge || Aluminum turned on lathe with additional Milling, machined nuts, air sealed hose and fittings || image |
|- | |- | ||
! 09 | ! 09 | ||
- | | | + | | Low Pressure Chamber || Tank Adapter || 1 || '''1.''' Allows additional volume to hold gas '''2.''' Seals front end of vertical adapter || Anodized Aluminum || Turned on Lathe || image |
|- | |- | ||
Revision as of 22:18, 8 February 2007
Contents |
Conventional and Unconventional Purposes
- Marking Cattle
- Marking Trees
- Non-Lethal Live Action War Simulation Training
- Paintball Games
- Fun and Entertainment
- Law Enforcement
Inputs and Outputs
- Pressurized CO2 (Input)
- Force of Pulling Trigger (Input)
- Paintballs (Input)
- Oil (Input)
- Paintball at High Velocity (Output)
- Expanded Non-Pressurized CO2 (Output)
- Small amounts of excess oil (Output)
Stake Holders
- Production Companies
- Paintbal Gun Manufacturers
- Proffesional Paintball Players
- Recreational Paintball Players
- Retail Stores
- Paintball Arenas
Operation Procedures
1)Apply oil to CO2 tank connector
2)Cock bolt
3)Connect tank
4)Open CO2 valve
5)Dry fire 10-15 times
6)Attach barrel
7)Attach hopper elbow
8)Attack hopper
9)Fill hopper with paintballs
10)Disengage power feed
11)Aim gun at target
12)Pull trigger
13)Repeat as neccessary
Specific User Considerations
- Fatigue or weak arms can't lift gun steadily
- Extreme low temperatures
- Too rapid a rate of fire
- Assembly difficult for disabled users (lost arm, or finger)
- Bad vision
- Clogged Barrel or Debris in system
Possible Areas of Improvement
- Shooting accuracy
- Shooting range and distance
- Gas efficiency
- Weight and size of marker
- Trigger pull distance
- Multiple projectile firing
- Reduction in number of components
- Ease of disassembly for cleaning and service
Functional Operation
Components
Part # | Part Name | Sub-Assemblies | Qty. | Function | Material | Manufacturing Process | Image |
---|---|---|---|---|---|---|---|
000 | Misc. Parts: Screws, nuts, pins, washers, o-rings | ALL | n/a | 1. Used for holding assemblies and parts in place 2. O-rings used for airseals 3. Lubricant used for wear protection and fluidity | Rubber/Silicon o-rings, steel screws, nuts, and other parts | Milled nut fittings for grip, purchased various other parts | image |
01 | Barrel | n/a | 1 | 1. Direct ball after exiting marker 2. Cause pressure gradient decreasing paintball deformation 3. Unscrews for easy cleaning | Anodized Aluminum | Turned on Lathe, Drilled out porting, Milled for aesthetics | image |
02 | Barrel Shroud | n/a | 1 | 1. Aesthetics 2. Shields barrel/body connection area | Plated Aluminum | Turned on Lathe and Milled | image |
03 | Sight Rail with Beaver Tail | n/a | 1 | 1. Provides a reference for aiming in a straight line 2. Protects user from moving bolt 3. Aesthetics 4. Shields Bolt | Anodized Aluminum | Extruded and Milled to final shape | image |
04 | Main Body | n/a | 1 | 1. Houses bot, striker, and valve sub-assemblies 2. Provides adapters for barrel, hopper, grip frame, ball detent, sight rail, and air system 3. Window to view movement of bolt 4. Color and milling for aesthetics | Anodized Aluminum | Aluminum Extrusion, Milling and Drilled Holes, Welded on Powerfeed, Reamed inner bores | image |
05 | Trigger Frame & Grip | Trigger Frame & Grip | 1 | 1. Attaches directly to main body 2. Double trigger for increased fire rate 3. Trigger guard to prevent accidental trigger pull 4. Grip provides stability for holding marker 5. Internals control bolt release 6. Holds attachment for drop forward and grip covers | Aluminum Alloy frame and trigger, Steel pins and levers, wire springs | Diecast frame and trigger with finish drilling and machining, milled levers, ground pins, press fit pins for assembly | image |
06 | .45 Grip Covers | Trigger Frame & Grip | 2 | 1. Attach to grip frame 2. Provide a rough grip 3. Hold drop froward nuts in place | Rubber | Injection Molded rubber | image |
07 | Mini Drop Forward | Trigger Frame & Grip and Tank Adapter | 1 | 1. Attaches the tank adapter to the grip frame 2. Centers weight by moving tank forward 3. Milled for aesthetics and decreased weight 4. Lowers tank on marker | Anodized Aluminum | Milled and Polished, Drilled Holes | image |
08 | Regulator/Expansion Chamber Assembly | Tank Adapter | 1 | 1. Transports air from tank to vertical adapter 2. Expansion chamber allows liquid CO2 to change to gas 3. Regulator controls flow from tank 4. Expansion chamber provides a front grip | Anodized Aluminum, Steel Fittings, Plastic Macroline hose, Pressure Gauge | Aluminum turned on lathe with additional Milling, machined nuts, air sealed hose and fittings | image |
09 | Low Pressure Chamber | Tank Adapter | 1 | 1. Allows additional volume to hold gas 2. Seals front end of vertical adapter | Anodized Aluminum | Turned on Lathe | image |
10 | |||||||
11 | |||||||
12 | |||||||
13 | |||||||
14 | |||||||
15 | |||||||
16 | |||||||
17 | |||||||
18 | |||||||
19 | |||||||
20 | |||||||
21 | |||||||
22 | |||||||
23 | |||||||
) |