Executive Summary

Executive Summary will go here. Assigned to Jeremy.

Stakeholders and Needs

Stakeholders and Needs will go here. Assigned to Mike.

Use of the Current Design

Use of Current Design will go here. Assigned to Mike.

How the Current Design Functions

Assigned to Mike.

List of Parts with Functions and Illustrations

Assigned to Aaron.

Part Number	Name	Qty.	Weight	Function	Material	Maunfacturing Process	Image
				Guitar Parts
G1	Back Panel/Pickguard Screws	12	.4 g	Fastener for Back Panel	Steel	Die Cast or Rolled
G2	Back Panel	1	30 g	Panel for Protecting Rear Bridge mount and tension springs	Plastic	Stamped or Molded
G3	Strings	6	2.33g	Strings are plucked to produce sound	Nickel/Steel	Wound
G4	Springs	3	10.33g	Used to keep strings under tension, connected to bridge	Steel	Wound
G5	Whammy Bar	1	10.33g	A lever which is pressed down to produce tremolo effect by tilting bridge	Steel/Plastic	Cast
G6	Bridge Mounting Screws	6	10g	Fasteners for bridge	Steel	Cast or Rolled
G7	Bridge (assembly)	1	N/A	Used to keep strings connected to guitar body and under tension	N/A	N/A
G8	Spring Claw	1	12g	Used to mount springs onto guitar body	Steel	Cast or Stamped
G9	Spring Claw Screws	2	2.5g	Used to fasten spring claw to guitar body	Steel	Cast or Rolled	[[Image:\|100px]]
G10	Saddle Plate	6	8.5g	Mounting point for strings in bridge	Brass	Cast or Stamped	[[Image:\|100px]]
G11	Saddle Spring	6	.166g	Maintains string tension in bridge while still allowing strings to move	Steel	Cast or Stamped	[[Image:\|100px]]
G12	Saddle Screw	6	.833g	Fastens Saddles to bridge plate	Steel	Cast or Rolled	[[Image:\|100px]]
G13	Neck	1	736g	Part of guitar body, Frets and tuning equipment attached to neck	Wood	Carved or Machined	[[Image:\|100px]]
G14	Neck Mounting Plate	1	57g	Used to mount neck to body	Steel/Plastic	Stamped	[[Image:\|100px]]
G15	Bridge Block	1	69g	Used to keep tension in strings, pass strings through bridge into body of guitar	Steel	Cast	[[Image:\|100px]]
G16	Bridge Block Mounting Screws	3	.666g	Used to fasten bridge block to bridge assembly	Steel	Cast or Rolled	[[Image:\|100px]]
G17	Guitar Body	1	N/A	Main body of guitar, contains bridge, strings, electronics	Wood	Carved or machined	[[Image:\|100px]]
				Floyd Rose Parts
FR1	Whammy Bar	1	49	A lever which is pressed down to produce tremolo effect	Steel	Cast
FR2	Springs	3	10.66g	Used to keep strings under tension, connected to bridge	Steel	Wound	[[Image:\|100px]]
FR3	Pivot Mounts	1	8g	Used for mounting pivot saddles	Steel	Cast	[[Image:\|100px]]
FR4	Pivot Screws	1	5g	Used for mounting pivots to bridge	Steel	Cast or rolled	[[Image:\|100px]]
FR5	Tuner Screws	6	2.66g	Used for minor tuning of the guitar	Steel	Cast or rolled	[[Image:\|100px]]
FR6	Bridge Bottom Screws	2	.05g	Used for fastening sustain block to bridge plate	Steel	Cast	[[Image:\|100px]]
FR7	String Clamps	6	1g	Used to keep strings attached to bridge	Steel	Cast	[[Image:\|100px]]
FR8	Clamp Screws	6	1.66g	Used to put force on string clamps	Steel	Cast or rolled	[[Image:\|100px]]
FR9	Saddle	6	20g	Used to provide motion for tremolo effect	Steel	Cast	[[Image:\|100px]]
FR10	Sustain Block	1	32g	Used to keep tension in strings, pass strings through bridge into body of guitar	Steel	Cast	[[Image:\|100px]]
FR11	Tuner Spring	1	6g	Used to keep pivots in place and provide motion for tremolo	Steel	Stamped	[[Image:\|100px]]
FR12	Bridge Plate	1	125g	Used to mount all pivots and other hardware to body of guitar	Steel	Cast	[[Image:\|100px]]