| Part Number
| Name
| Qty.
| Weight (g)
| Function
| Material
| Maunfacturing Process
| Image
|
| 001 | Dispensor spring | 1 | 1 | Keeps dispensor closed when not in use | ??? | |
|
| 002 | Dispensor support | 1 | 19 | Guides the plunger for straight release | Plastic | |
|
| 003 | Dispensor plunger | 1 | 9 | Pushes the dough from the cup into the machine | Plastic | |
|
| 004 | Dispensor funnel | 1 | 27 | Guides the dough to the hole in the cup | Plastic | |
|
| 005 | Dispensor cup | 1 | 122 | Holds the dough for disspensing | Plastic | |
|
| 006 | Dispensor stop | 1 | 4 | Stops the dough from leaving dispensor and gives donut its \"hole\" | Plastic | |
|
| 007 | Power cord | 1 | 107 | Connects to the outlet and supplies power to the machine | ???? | |
|
| 008 | Measuring cup | 1 | 27 | Used to measure out correct amount of ingredients | Plastic | |
|
| 009 | Doughnut slide | 1 | 36 | Removes doughnut from machine and into the doughnut bin | Plastic | |
|
| 010 | Doughnut bin | 1 | 81 | Collects doughnuts after production | Plastic | |
|
| 011 | Doughnut oil drain | 1 | 19 | Drains oil off donuts after production | Plastic | |
|
| 012 | Doughnut dispensor motor cover | 1 | 52 | Gives access to and protects the motor | | |
|
| 013 | Doughnut cover feet | 4 | 3 | Contacts surface | Plastic | |
|
| 014 | Dispensor motor latch | 1 | 4 | Secures and alligns the motor dispensor assembly | ???? | |
|
| 015 | Drain switch cover | 1 | 12 | Protects from accidently enabling the drain switch | Plastic | |
|
| 016 | Top window 1 | 1 | 55 | Allows heat to escape when opened during production | ????
|
| 017 | Oil collection tray | 1 | 237 | Collects the oil that drains after use | Plastic
|
| 018 | Top window 2 | 1 | 123 | Cannot be opened. Allows user to view doughnut production | ???
|
| 019 | Conveyer belt holder | 2 | 0.5 | Guides and supports the conveyer system in its cycle | Plastic
|
| 020 | Dispensor motor guide | 1 | 11 | Guides the motor\'s movement. Stationary | Plastic
|
| 021 | Motor rotational output | 1 | 4 | Connects to the motor and rotates with it | Plastic
|
| 022 | Doughnut carriage | 4 | 27 | Used to carry doughnuts through the system during operation | Plastic
|
| 023 | Belt gear washers | 2 | 5 | Seperates the belt gears from the back of the housing | ????
|
| 024 | Conveyer belt gear (doughnut side) | 1 | 85 | Rotates and moves conveyer belt system | Plastic
|
| 025 | Conveyer belt gear (dough side) | 1 | 109 | Rotates and moves conveyer belt system | Plastic
|
| 026 | Conveyer belt | 1 | 123 | Driven by the motor to move doughnuts through system | Plastic
|
| 027 | Release link | 4 | 1 | Alerts the motor to release the dough | Plastic
|
| 028 | Belt guides | 2 | 14 | Guides the belt on lower portion of the cycle | Plastic
|
| 029 | Washer, belt guide | 3 | 0.25 | Seperates the belt guide from housing | ????
|
| 030 | Washer, belt gear | 2 | 2 | Seperates the belt gear from housing | ????
|
| 031 | Belt motor gear | 1 | 14 | Translates motion from motor to conveyer belt | Plastic
|
| 032 | Back housing | 1 | 772 | Protects delicate machinery from the surroundings | Plastic | | |
|
| 033 | Oil bath tub and doughnut flipper | 1 | 323 | Fills with oil and becomes very hot. Flipper flips donuts to opposite side | Plastic - oil bath ????-flipper | | |
|
| 034 | Oil bath supports | 4 | 6 | Holds the oil bath in place | ???? | | |
|
| 035 | Temperature controller bracket | 1 | 13 | Connects heating element to the oil bath | ???? | | |
|
| 036 | Drive gear 2 | 1 | 4 | Moved by the motor and translates motion to conveyer gear | Plastic | | |
|
| 037 | Wire guide | 1 | 0.5 | Secures wires to housing | ???? | | Maybe no pic? |
|
| | | | | | | | |
|
| | | | | | | | |
|
| Additional Items (Screws mainly) | | | | | | | |
|
| | Screw type 1 | 6 | 1.25 | Holds housing together | ???? | | |
|
| | Screw type 2 | 2 | 0.5 | Secures motor cover | ???? | | |
|
| | Screw type 3 | 8 | 1 | Connects feet to housing | ???? | | |
|
| | Screw type 4 | 2 | 0.75 | Connects dispensor motor latch to housing | ???? | | |
|
| | Screw type 5 | 2 | 0.5 | Connects conveyer belt holder to the housing | ???? | | |
|
| | Screw type 6 | 2 | 1 | Connects belt guides to the housing | ???? | | |
|
| | Screw type 7 | 2 | ???? | Welded into oil bath tub to secure heating element | ???? | | |
|
| | Screw type 8 | 2 | 0.5 | Connects temperature controler bracket to ???? | ????
|
| | Screw type 9 | 1 | 0.5 | Connects wire bracket to housing | ????
|
| | Nut type 1 | 2 | 0.5 | On the end of screw type 8 | ????
|
|
|
