Doughnut maker
From DDL Wiki
Contents |
Executive Summary
Bill of Materials
Main Components
| Dough Dispenser Cup Assembly | ||||||||
|---|---|---|---|---|---|---|---|---|
| Part Number | Name | QTY | Weight (g) | Function | Material | Manufacturing Process | Image | |
| 001 | Dispenser spring | 1 | 1 | Keeps dispenser closed when not in use | Steel | bending | 
| |
| 002 | Dispenser support | 1 | 19 | Guides the plunger for straight release | Plastic | Injection molding | 
| |
| 003 | Dispenser plunger | 1 | 9 | Pushes the dough from the cup into the machine | Plastic | Injection molding | 
| |
| 004 | Dispenser funnel | 1 | 27 | Guides the dough to the hole in the cup | Plastic | Injection molding | 
| |
| 005 | Dispenser stop | 1 | 4 | Stops the dough from leaving dispenser and gives the doughnut its \"hole\" | Plastic | Injection molding | 
| |
| 006 | Dispenser cup | 1 | 122 | Holds the dough for dispensing | Plastic | Injection molding | 
| |
| Dispenser Motor and Conveyer Motor Assembly | ||||||||
| Part Number | Name | QTY | Weight (g) | Function | Material | Manufacturing Process | Image | |
| 007 | Switch cover | 1 | 23 | Covers and protects the two switch connected to the housing | Plastic | Injection molding | 
| |
| 008 | Dispenser motor | 1 | 204 | Drives the dispenser assembly | N/A | Purchased part | 
| |
| 009 | Motor rotational output | 1 | 4 | Connects to the motor and rotates with it | Plastic | Injection molding | 
| |
| 010 | Dispenser motor guide | 1 | 11 | Guides the motor's movement. Stationary | Plastic | Injection molding | 
| |
| 011 | Dispenser motor housing | 1 | 113 | Houses and protects the dispenser motor assembly | Plastic | Injection molding | 
| |
| 012 | Dispenser motor switch 1 | 1 | 5 | Alerts for dough release | N/A | Purchased part | 
| |
| 013 | Dispenser motor switch 2 | 1 | 5 | Halts the dispensing process | N/A | Purchased part | 
| |
| 014 | Dispenser switch housing | 1 | 4 | Positions switch to alert for dough release | Plastic | Injection molding | 
| |
| 015 | Capacitor | 2 | 5 | Stores electrical charge | N/A | Purchased part | 
| |
| 016 | Doughnut dispenser motor cover | 1 | 52 | Gives access to and protects the motor | Plastic | Injection molding | 
| |
| 017 | Dispenser motor latch | 1 | 4 | Secures and aligns the motor dispenser assembly | Plastic | Injection molding | 
| |
| 018 | Conveyor belt motor | 1 | 219 | Drives the conveyor belt assembly | N/A | Purchased part | 
| |
| 019 | Drive gear 2 | 1 | 4 | Moved by the motor and translates motion to conveyor gear | Plastic | Injection molding | 
| |
| 020 | Conveyor motor switch 1 | 2 | 23 | Connects and controls dials | N/A | Purchased part | 
| |
| 021 | Motor switch holder | 1 | 10 | Holds the switch and cradles the motor | Plastic | Injection molding | 
| |
| 022 | Adjustment Knob | 2 | 6 | Used to open and close the oil drain. | Plastic | Injection molding | 
| |
| 023 | Wire guide | 1 | 0.5 | Secures wires to housing | Steel | Stamping | 
| |
| 024 | Power jack | 1 | 15 | Connects to power cord | N/A | Purchased part | 
| |
| 025 | Power jack housing | 1 | 5 | Covers and protects the power jack | Plastic | Injection molding | 
| |
| Conveyor Belt Assembly | ||||||||
| Part Number | Name | QTY | Weight (g) | Function | Material | Manufacturing Process | Image | |
| 026 | Belt motor gear | 1 | 14 | Translates motion from motor to conveyor belt | Plastic | Injection molding | 
| |
| 027 | Conveyor belt link assembly (60 links with 60 rivets) | 1 | 123 | Driven by the motor to move doughnuts through system. | Plastic | Injection molding | 
| |
| Release link | 4 | 1 | Alerts the motor to release the dough | Plastic | Injection molding | 
| ||
| 028 | Doughnut carriage | 4 | 22 | Used to carry doughnuts through the system during operation | Aluminum alloy | Punching then Stamping then Welding | 
| |
| Doughnut carriage arm | 4 | 5 | Connects carriage to conveyor belt | Plastic | Injection molding | 
| ||
| 029 | Conveyer belt holder | 2 | 0.5 | Guides and supports the conveyor system in its cycle | Plastic | Injection molding | 
| |
| 030 | Conveyor belt gear (doughnut side) | 1 | 85 | Rotates and moves conveyor belt system | Plastic | Injection molding | 
| |
| 031 | Conveyor belt gear (dough side) | 1 | 109 | Rotates and moves conveyor belt system | Plastic | Injection molding | 
| |
| 032 | Belt gear washers, thick | 2 | 5 | Holds belt gears in place | Steel | Punching | 
| |
| 033 | Belt gear washers, thin | 2 | 2 | Separates the belt gear from back housing | Steel | Punching | 
| |
| 034 | Belt guides | 2 | 14 | Guides the belt on lower portion of the cycle | Plastic | Injection molding | 
| |
| 035 | Yellow Washer, belt guide | 3 | 0.25 | Separates the belt guide from housing | Plastic | Injection molding | 
| |
| Oil System Assembly | ||||||||
| Part Number | Name | QTY | Weight (g) | Function | Material | Manufacturing Process | Image | |
| 036 | Doughnut flipper | 1 | 10 | Flips donuts to opposite side | Steel | Cut then drawn | 
| |
| Oil bath tub | 1 | 313 | Fills with oil and becomes very hot. | Aluminum Alloy | Drawing then cutting | 
| ||
| Oil bath heating unit | 1 | Causes the oil bath tub to become hot. | N/A | Purchased part | 
| |||
| 037 | Oil bath supports | 4 | 6 | Holds the oil bath in place | Plastic | Injection molding | 
| |
| 038 | Temperature controller bracket | 1 | 13 | Connects heating element to the oil bath | Steel | Stamping | 
| |
| 039 | Temperature controller | 1 | 20 | Regulates the heating element | N/A | Purchased part | 
| |
| 040 | Knob housing | 1 | 32 | Protects oil drain components and user | Plastic | Injection molding | 
| |
| 041 | Drain switch cover | 1 | 12 | Protects from accidentally enabling the drain switch | Plastic | Injection molding | 
| |
| 042 | Adjustment Knob | 1 | 6 | Used to open and close the oil drain. | Plastic | Injection molding |
| |
| 043 | Dial connector | 1 | 3 | Translates knob movement through the housing | Plastic | Injection molding | 
| |
| 044 | Drain lever | 1 | 6 | Used for securing switch in both positions | Plastic | Injection molding | 
| |
| 045 | Oil drain valve mount | 1 | 4 | Mounts the drain in appropriate location | Plastic | Injection molding | 
| |
| 046 | Oil drain valve | 1 | 33 | Controls the flow of the oil | Brass | Purchased part | 
| |
| 047 | Oil drain tube | 1 | 2 | Channels the flow of the oil | Rubber | Purchased part | 
| |
| 048 | Oil drain tube clamp | 2 | .5 | Secures the tube onto the valve and drain | Steel | Purchased part | 
| |
| 049 | Oil collection tray | 1 | 237 | Collects the oil that drains after use | Plastic | Injection molding | 
| |
| 050 | Oil collection tray guide | 1 | 7 | Guides the oil collection tray into place. | Plastic | Injection molding | 
| |
| Exterior Panel Assembly | ||||||||
| Part Number | Name | QTY | Weight (g) | Function | Material | Manufacturing Process | Image | |
| 051 | Front panel | 1 | 1160 | Protects the inside machinery from the outside | Plastic | Injection molding | 
| |
| 052 | Back panel | 1 | 1160 | Protects the inside machinery from the outside | Plastic | Injection molding | 
| |
| 053 | Top window 1 | 1 | 55 | Allows heat to escape when opened during production | Plastic | Injection molding | 
| |
| 054 | Top window 2 | 1 | 123 | Cannot be opened. Allows user to view doughnut production | Plastic | Injection molding | 
| |
| Miscellaneous Components | ||||||||
| Part Number | Name | QTY | Weight (g) | Function | Material | Manufacturing Process | Image | |
| 055 | Power cord | 1 | 107 | Connects to the outlet and supplies power to the machine | N/A | Purchased part | 
| |
| 056 | Measuring cup | 1 | 27 | Used to measure out correct amount of ingredients | Plastic | Injection molding | 
| |
| 057 | Doughnut slide | 1 | 36 | Removes doughnut from machine and into the doughnut bin | Plastic | Injection molding | 
| |
| 058 | Doughnut bin with oil drain | 1 | 100 | Collects doughnuts after production and drains oil off doughnuts after production | Plastic | Injection molding | 
| |
| 059 | Doughnut cover feet | 4 | 3 | Contacts surface | Plastic | Injection molding | 
| |
Additional Parts
| Screws |
|---|
|
| Nuts and Washers |
|
Assembly Diagrams
| Dough Dispenser Cup Assembly |
|---|
|
| Dispenser Motor and Conveyor Motor Assembly |
 
|
|
| Dispenser Motor and Conveyor Motor Assembly Schematic |
|
| Conveyor Belt Assembly |
|
| Cooking Oil Assembly |
 
|
| Exterior Panel Assembly |
|
Major Stakeholders and Needs
Usage and Usability
Mechanical Function
Design for Manufacturing and Assembly (DFMA)
Failure Modes and Effects Analysis (FMEA)
| Part # | Item and Function | Failure Mode | Effects of Failure | S | Causes of Failure | O | Design Controls | D | RPN | Recommended Actions | Responsibility and Deadline | Actions Taken | S | O | D | RPN |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 001 | "Dispenser spring"
| Deformed spring (too long/short) | Unable to fully open/close causing incorrect dough dispensing | 7 | Improper manufacturing | 2 | Inspecting dispenser spring | 2 | 28 | Introduce quality control measures to ascertain accurate spring dimension | Manufacturing and Quality Control | None | 7 | 2 | 2 | 28 |
| 002 | "Dispenser support"
| Warped | Dispenser plunger moving at angle disrupting dough shaping | 7 | Improper manufacturing | 2 | Inspecting dispenser support or dispenser plunger | 2 | 28 | Introduce quality control measures to ascertain dispenser quality | Manufacturing and Quality Control | None | 7 | 2 | 2 | 28 |
| 003 | "Dispenser plunger"
| # | # | # | # | X | X | None | # | # | # | # | ||||
| 004 | "Dispenser funnel"
| # | # | # | # | X | X | None | # | # | # | # | ||||
| 005 | "Dispenser stop"
| # | # | # | # | X | X | None | # | # | # | # |
Design for Environment (DFE)
Mechanical Analysis
Team Members & Roles
Michael Barako - DFE, Mechanical Analysis
Meng Yee Chuah - Mechanical Function
Katie McManus - Assembly Photos, DFMA
Sam Powers - Bill of Materials, FMEA
Sara Whitby - Executive Summary, Major Stakeholders, Usage and Usability
