Part #
| Part Name
| QTY
| Weight (g)
| Function
| Manufacturing
| Material
| Image
|
Soda Gun Sub-Assembly
|
1
| "Round head 1/2"" Length 1/8th"" Dia Phillips"
| 2
| <1
| Fastens button panel
| SS
| Std Purchase Part
|
|
2
| Elliptical Soda Button (Top)
| 2
| <1
| User input button for soda, designates type
| P
| Injection Molded
|
|
3
| Eliptical Soda Button (Bot)
| 2
| <1
| Translates input key foce to release soda
| P
| Injection Molded
|
|
4
| Circle Soda Button (Top)
| 8
| <1
| User input button for soda, designates type
| P
| Injection Molded
|
|
5
| Circle Soda Button (Bot)
| 8
| <1
| Translates input key foce to release soda
| P
| Injection Molded
|
|
6
| "Flat head 3/8"" len 1/8"" dia philips"
| 2
| <1
| Fastens panel to gun body
| SS
| Std Purchase Part
|
|
7
| Plastic Washer (For Part #6)
| 2
| <1
| Spacing
| P
| Injection Molded
|
|
8
| Small Butterfly Cliip
| 2
| <1
| Aligns button to pin valves
| SS
| Die Cast, punched
|
|
9
| Large Butterfly Clip
| 2
| <1
| Aligns button to pin valves
| SS
| Die Cast, punched
|
|
10
| Button Panel, blue, 10 button
| 1
| 12
| Holds all buttons in place
| P
| Injection Molded
|
|
11
| "Round head 1"" len 1/8"" dia flat screw"
| 2
| <1
| Fastened gun to hose base
| SS
| Std Purchase Part
|
|
12
| "Round head 1/2"" len, 1/8"" dia flat screw"
| 2
| <1
| Fastened gun to hose base
| SS
| Std Purchase Part
|
|
13
| "Hexagon, 7/8"" len, 1/8"" dia threaded head (Recieves Part #11)"
| 2
| <1
| Fastened gun to hose base
| SS
| Std Purchase Part
|
|
14
| Nozzle caps, clear plastic
| 10
| <1
| Reduces hose diameter into gun base
| P
| Injection Molded
|
|
15
| O-ring, rubber
| 10
| <1
| Seals hose to gun base
| Rubber
| Std Purchase Part
|
|
16
| "Round head, 3/8"" len, 1/8"" dia, philips screw"
| 5
| <1
| Fasten back panel to gun
| SS
| Std Purchase Part
|
|
17
| Back panel, blue
| 1
| 6
| Provides grip to back of gun, aesthetic
| P
| Injection Molded
|
|
18
| "Custom screw, 1/2"" len, 1/8"" dia, flat head"
| 1
| <1
| Supports back panel
| SS
| Std Purchase Part
|
|
19
| Rubber o-ring for Part #18
| 1
| <1
| Seals screw, provides snug fit
| Rubber
| Std Purchase Part
|
|
20
| "O-ring, rubber, red 1/4"" dia"
| 12
| <1
| Seals valve assy
| Rubber
| Std Purchase Part
|
|
21
| Clear plastic spring cap
| 12
| <1
| Caps spring (Part #22)
| P
|
|
|
22
| "Small spring, 1/2"" len"
| 12
| <1
| Translates input to opening valve, reset valv when released
| SS
| Std Purchase Part
|
|
23
| "O-ring, rubber, red, 1/8"" dia"
| 12
| <1
| Seals (Part #24) to valve assy
| Rubber
| Std Purchase Part
|
|
24
| Pin
| 12
| <1
| Holds valve in place, allows for vertical motion
| SS
| Std Purchase Part
|
|
25
| Plastic valve
| 12
| <1
| Glued to pin, opens/closes each syrup line
| P
| Injection Molded
|
|
26
| Soda gun Nozzle, plastic, blue
| 1
| 13
| Focuses final soda dispense
| P
| Injection Molded
|
|
27
| "Black, O-ring, rubber, 1"" dia"
| 1
| <1
| Seals nozzle head to gun
| Rubber
| Std Purchase Part
|
|
28
| Soda gun body
| 1
| 113
| Directs and organizes flow for all fluids exiting soda gun
| P
| Machined in five layers, irreversibly sealed together, post-drilled
|
|
29
| Soda gun nozzle base
| 1
| 10
| Creates central location for syrup+soda to mix and exit gun
| P
| Turned, glued to soda gun body
|
|
30
| Soda gun nozzle base retaining pins
| 2
| <1
| Create fixture points for nozzle base
| SS
| Turned
|
|
31
| Stickers (misc.)
| 12
| <1
| Provides information and instructions about product, barcodes, safety information use, and beverage types
| Paper
| Printed
|
|
Part Number
Name
| Qty
| Weight (g)
| Function
| Material
| Manufacturing Process
| Image
|
1
| Plastic Regulator Backing
| 1
| 41
| Hold tubes to regulator
| P
| Injection Molded
|
|
2
| "flat top, 1"" len, 1/4"" dia, philips head screw"
| 4
| 3 (ea)
| Fastens regulator casing together
| SS
| Std Purchase Part
|
|
3
| Tube retainer, retaining clips
| 20
| <1
| Retain the tube retainers to base
| SS
| Std Purchase Part ??
|
|
4
| Property of Pepsi sticker
| 2
| <1
| Identifies Pepsi product
| Paper
| Printed
|
|
5
| Tube housing, main body
| 1
| 46
| Holds the tube housing
| P
| Injection Molded
|
|
6
| Tube housing, single holder
| 10
| 6
| Connects two sides of tubes
| P
| Injection Molded
|
|
7
| Shut-off screw
| 10
| <1
| Shuts off soda flow
| P
| Injection Molded
|
|
8
| "Shut-off screw o-ring 1/4"" dia, rubber"
| 10
| <1
| Seals shut-off screws
| Rubber
| Std. Purchase Part
|
|
9
| Flow adjustment screw
| 10
| <1
| Adjusts syrup/water ratio
| P
| Injection Molded
|
|
10
| "Flow adjustment screw o-ring, 1/4"" dia, rubber"
| 10
| <1
| Seals adjustment screw
| Rubber
| Std. Purchase Part
|
|
11
| "Housing retaining pin 1"", 5/32"" dia"
| 2
| 4
| Holds tube housing halves together
| SS
| Cut to length
|
|
12
| Pivot pin for separating mechanism
| 1
| <1
| Creates pivot point for half separator of plastic reg. housing
| SS
| Cut to length
|
|
13
| Plastic regulator fronting
| 1
| 63
| Hold tubes to regulator
| P
| Injection Molded
|
|
14
| Cap of separating mechanism, white
| 1
| <1
| User interaction point for separator mechanism
| P
| Injection Molded
|
|
15
| Cap of separating mechanism rivot
| 1
| <1
| Held cap to main separating body
| SS
| Turned/Lathed
|
|
16
| Main separator body
| 1
| 5
| Separates the halves
| P
| Injection Molded
|
|