| Part # | Part Name | Quantity | Weight (grams) | Function | Manufacturing Process | Picture
|
| 1
| Motor Connection Nut | 1 | 6 | Holds the entire wiper assembly to the motor | Cast | 
|
| 2
| Motor Connection Link (1L) | 1 | 62 | Link connecting the spinning motor to Link 1 | Cast, with the knob pressed into it | 
|
| 3
| Link 1 (LN3) | 1 | 158 | | Cast, with the knobs pressed into it | 
|
| 4
| Rubber Connections | 2 | Unable to detach | Caps on Link 1 that are used to attach to the metal knobs in the connection links | Injection molded and pressed onto the link | 
|
|
| WIPER CONNECTION SUBASSEMBLY 1 | | | | | 
|
| 5
| Rubber cap | 1 | 0 | Rubber cap that goes over the wiper connection point in the subassembly | Injection molded, loose fit | 
|
| 6
| Hex Screws | 3 | 7 (#7+#8) | Screw to bolt wiper connection subassembly into car | Cast | 
|
| 7
| Washers | 3 | 7 (#7+#8) | Washers to go with hex screws | Cast | 
|
| 8
| Rubber thermal mount | 1 | 31 | Rubber around subassembly to allow for mounting | Injection Molded | 
|
