Part Number | Qty. | Part Name | Part Function | Part Type | Manufacturing Process | Part Image
|
001
| Base - bottom | 1 | Provide an area for the ice cream maker to sit on. holds the motor components. | Plastic | two part molding |
|
002
| Base - top | 1 | Holds the rest of the upper assembly. provides an area for the on/off switch. | Plastic | two part molding |
|
003
| Dotted base screw | 1 - Dotted Screw 3- Flat head screws | Specially tailored screw to hold base together and to prevent user tampering | Steel | asdf |
|
004
| Drive gear | 1 - Plastic Component 1 - Metal Component | This gear is turned by the motor and creates the high torque ratio. The metal disc provides extra support to the gear | Aluminum | asdf |
|
005
| Fan Stopper | 1 | Holds the fan in place | Aluminum | stamping |
|
006
| Fan | 1 | Cools the motor and prevents over heating of components | Plastic | asdf |
|
007
| Gear Box | Holds all the gears in place to run the mixer and the fan | |
|
008
| Lid | Holds the mixing arm in place and prevents splash from the ingredients | |
|
009
| Long Screws | Keeps the motor components in place and attached to the bottom base | |
|
010
| Mixing Bowl | Freezes the ingredients while they are churned by the mixing arm | |
|
011
| Mixing Arm | Mixes the ingredients in such a manner to properly form the frozen ice cream structure | |
|
012
| Mixing Gear Seal | Provides a seal between the mixing gear and the top of the base so that ingredients do not drop into the motor area | |
|
013
| Mixing Gear | Turned by the drive gear and in turn rotates the mixing bowl | |
|
014
| Motor Base | Provides housing for all motor components and creates an alternating magnetic field generated by the Motor Coil Assembly to run the motor spindle | |
|
015
| Motor Coil Assembly | Assembly made of copper coil wrapped around a plastic base. Receives a current from the electricity source which is then used to generate a magnetic field | |
|
016
| Motor Spindle | Motor component which is rotated as a result of the magnetic field. Turns the drive gear which in turn rotates the mixing gear. | |
|
017
| Motor Spindle Holder | Holds the motor spindle in place at the top of the base there drive gear is attached. Provides an starting anchor point of the long screws. | |
|
018
| Motor Wrapping | Paper used to hold the motor copper coil in place and stop it from unraveling | |
|
019
| On/Off Switch Assembly | A mechanism used to open and close a circuit to allow users to manually stop and start the ice cream maker. | |
|
020
| On/Off Switch | A user friendly switch that allows users to operate the On/Off switch assembly | |
|
021
| Rubber Stopper | Provides a mechanism to stop the ice cream maker from sliding across what ever surface it is on while prevent users from reaching the screws which hold the base together. | |
|
022
| Wire Caps | Provides a safe way to keep wire ends held together | |
|
023
| Wire Hold Down | Keeps the wire in the base away from moving parts | |
|