|
|
Line 9: |
Line 9: |
| | Motor Connection Link (1L) || 1 || 62 || Link connecting the spinning motor to Link 1 || Cast, with the knob pressed into it || [[Image:motor connection link.jpg|100 px]] | | | Motor Connection Link (1L) || 1 || 62 || Link connecting the spinning motor to Link 1 || Cast, with the knob pressed into it || [[Image:motor connection link.jpg|100 px]] |
| |- | | |- |
- | ! 2 | + | ! 3 |
- | | Motor Connection Link (1L) || 1 || 62 || Link connecting the spinning motor to Link 1 || Cast, with the knob pressed into it || [[Image:motor connection link.jpg|100 px]] | + | | Link 1 (LN3) || 1 || 158 || || Cast, with the knobs pressed into it || [[Image:Link 1 (LN3).jpg|100 px]] |
| |- | | |- |
- | ! 2 | + | ! 4 |
- | | Motor Connection Link (1L) || 1 || 62 || Link connecting the spinning motor to Link 1 || Cast, with the knob pressed into it || [[Image:motor connection link.jpg|100 px]] | + | | Rubber Connections || 2 || Unable to detach || Caps on Link 1 that are used to attach to the metal knobs in the connection links || Injection molded and pressed onto the link || [[Image:rubber connection.jpg|100 px]] |
| |- | | |- |
- | ! 2 | + | ! |
- | | Motor Connection Link (1L) || 1 || 62 || Link connecting the spinning motor to Link 1 || Cast, with the knob pressed into it || [[Image:motor connection link.jpg|100 px]] | + | | WIPER CONNECTION SUBASSEMBLY 1 || || || || || [[Image:wiper connection subassembly 1.jpg|100 px]] |
| |- | | |- |
- | ! 2 | + | ! 5 |
- | | Motor Connection Link (1L) || 1 || 62 || Link connecting the spinning motor to Link 1 || Cast, with the knob pressed into it || [[Image:motor connection link.jpg|100 px]] | + | | Rubber cap || 1 || 0 || Rubber cap that goes over the wiper connection point in the subassembly || Injection molded, loose fit || [[Image:ww-rubber cap.jpg|100 px]] |
| |- | | |- |
- | ! 2 | + | ! 6 |
- | | Motor Connection Link (1L) || 1 || 62 || Link connecting the spinning motor to Link 1 || Cast, with the knob pressed into it || [[Image:motor connection link.jpg|100 px]] | + | | Hex Screws || 3 || 7 (#7+#8) || Screw to bolt wiper connection subassembly into car || Cast || [[Image:ww-hex screws.jpg|100 px]] |
| |- | | |- |
- | ! 2 | + | ! 7 |
- | | Motor Connection Link (1L) || 1 || 62 || Link connecting the spinning motor to Link 1 || Cast, with the knob pressed into it || [[Image:motor connection link.jpg|100 px]] | + | | Washers || 3 || 7 (#7+#8) || Washers to go with hex screws || Cast || [[Image:ww-washer.jpg|100 px]] |
| + | |- |
| + | ! 8 |
| + | | Rubber thermal mount || 1 || 31 || Rubber around subassembly to allow for mounting || Injection Molded || [[Image:ww-rubber mount.jpg|100 px]] |
| | | |
| |} | | |} |
Part # | Part Name | Quantity | Weight (grams) | Function | Manufacturing Process | Picture
|
1
| Motor Connection Nut | 1 | 6 | Holds the entire wiper assembly to the motor | Cast |
|
2
| Motor Connection Link (1L) | 1 | 62 | Link connecting the spinning motor to Link 1 | Cast, with the knob pressed into it |
|
3
| Link 1 (LN3) | 1 | 158 | | Cast, with the knobs pressed into it |
|
4
| Rubber Connections | 2 | Unable to detach | Caps on Link 1 that are used to attach to the metal knobs in the connection links | Injection molded and pressed onto the link |
|
| WIPER CONNECTION SUBASSEMBLY 1 | | | | |
|
5
| Rubber cap | 1 | 0 | Rubber cap that goes over the wiper connection point in the subassembly | Injection molded, loose fit |
|
6
| Hex Screws | 3 | 7 (#7+#8) | Screw to bolt wiper connection subassembly into car | Cast |
|
7
| Washers | 3 | 7 (#7+#8) | Washers to go with hex screws | Cast |
|
8
| Rubber thermal mount | 1 | 31 | Rubber around subassembly to allow for mounting | Injection Molded |
|