Water gun

From DDL Wiki

Revision as of 15:28, 1 February 2011 (view source) Svalerio@andrew.cmu.edu (Talk | contribs) (→Design for MAnufacture & Assembly (DFMA)) ← Older edit		Revision as of 15:29, 1 February 2011 (view source) Svalerio@andrew.cmu.edu (Talk | contribs) (→Design for Environment (DFE)) Newer edit →
Line 33:		Line 33:
	== Design for Environment (DFE)==		== Design for Environment (DFE)==
		+
		+	==Team Roles==

---

Revision as of 15:29, 1 February 2011

Contents 1 Executive Summary 2 Bill of Materials 2.1 Main Components 2.2 Additional Parts 2.3 Assembly 3 Stakeholders 4 Consumer 5 Usage 5.1 How It's Used 5.2 User Studies 6 Mechanical Analysis 7 Design for Manufacture & Assembly (DFMA) 8 Failure Modes & Effects Analysis (FMEA) 9 Design for Environment (DFE) 10 Team Roles

Executive Summary

Bill of Materials

Main Components

Additional Parts

Assembly

Stakeholders

Consumer

With relation to the Saturator water gun, there are two major consumers: parents who are buying the water gun, and children who will be playing with it. The needs and requirements of these two consumers are drastically different as shown below.

Buyer (Parents)

User (Children)

Usage

How It's Used

User Studies

Mechanical Analysis

Design for Manufacture & Assembly (DFMA)

Failure Modes & Effects Analysis (FMEA)

Design for Environment (DFE)

Team Roles