Water gun
From DDL Wiki
(Difference between revisions)
(→How It's Used) |
(→How It's Used) |
||
Line 87: | Line 87: | ||
===How It's Used=== | ===How It's Used=== | ||
- | [[Image:How to Use the | + | [[Image:How to Use the Saturator2.jpg]] |
===User Studies=== | ===User Studies=== |
Revision as of 14:58, 5 February 2011
Contents |
Executive Summary
Bill of Materials
External Gun Assembly | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Part Number | Sub-Assembly | Name | QTY | Weight (g) | Function | Material | Manufacturing Process | Image | ||
001 | Shell | side A | 1 | 110.5 | Cases the assembly together | Plastic | Injection molding | |||
002 | Shell | side B | 1 | 110.9 | Holds sub-assemblies together | Plastic | Injection molding | |||
003 | Shell | nozzle ring | 1 | 1.2 | Cases the nozzle assembly and the assembly shell together | Plastic | Injection molding | |||
004 | Reservoir Release | switch | 1 | 0.5 | Releases the reservoir from the body | Plastic | Compression molding | |||
005 | Reservoir Release | slider | 1 | 0.4 | Guides the path of the release switch | Plastic | Injection molding | |||
006 | Reservoir Release | spring | 1 | 0.3 | Creates elastic movement of the release switch | Plastic | Injection molding | |||
007 | Reservoir Release | retaining plate | 1 | 0.2 | Glued to the shell side A to hold the reservoir release sub-assembly together | Plastic | Compression molding | |||
008 | Battery cover | spring | 2 | 0.1 | Makes contact with the battery | Steel | Bending | |||
009 | Battery cover | latch | 1 | 0.1 | Holds the plastic casing and the two shell sides together | Steel | Cutting | |||
010 | Battery cover | spring bracket | 1 | 2.4 | Makes contact with the battery | Aluminum | Blanking | |||
011 | Battery cover | plastic | Dispenser Motor and Conveyer Motor Assembly | |||||||
Part Number | Name | QTY | Weight (g) | Function | Material | Manufacturing Process | Image |