Lawn Mower Analysis
From DDL Wiki
(Difference between revisions)
(→Purpose of Analysis) |
(→Assumptions) |
||
| Line 3: | Line 3: | ||
= Assumptions = | = Assumptions = | ||
| + | |||
| + | *We will be assume that all bodies connected by welds are to be considered one single body. | ||
| + | |||
| + | *We will ignore the weight of the hardware and delrin rollers. We will assume that their weights are insignificant when compared with the weights of the steel tubing and steel plate. | ||
| + | |||
= Symbols and Equations = | = Symbols and Equations = | ||
= Conclusion = | = Conclusion = | ||
= Implementation = | = Implementation = | ||
Revision as of 19:06, 10 November 2008
Contents |
Purpose of Analysis
The purpose of this analysis is to verify that the appropriate design choices and material choices have been made.
Assumptions
- We will be assume that all bodies connected by welds are to be considered one single body.
- We will ignore the weight of the hardware and delrin rollers. We will assume that their weights are insignificant when compared with the weights of the steel tubing and steel plate.
