From DDL Wiki
(Difference between revisions)
|
|
Line 59: |
Line 59: |
| |- | | |- |
| ! 17 | | ! 17 |
- | | acrylic board || 4 || purchased from Lowe's || casing of the whole device || $10 || [[Image:batteryy.jpg|150px|]] | + | | acrylic board || 4 || purchased from Lowe's || casing of the whole device || $10 || [[Image:acrylicboard.jpg|150px|]] |
| |} | | |} |
Revision as of 22:38, 7 December 2009
Design Documentation
Following table is the list of materials used for the final prototype.
Some small screws, washer, and bolts are not shown in the CAD model, but they are included in the list.
Part Number | Name | Quantity | Manufacture Process / Material | Function | (estimated)Cost | CAD drawing/picture
|
1
| motor | 2 | taken from power drill purchased from Black$Decker GC9600 | First motor rotates the rods to move second motor along the path. Second motor rotates the tri-fork | $5 |
|
2
| rolling frame | 1 | metal sheet bending/steel sheet | A stable carriage for the second motor | $12 |
|
3
| clear rod length 45cm | 1 | acquired from mechE shop | To stabilize the rolling frame from being overturned | $10 |
|
4
| clear rod bushing | 1 | milling machine/steel | To fix the clear rod | $5 |
|
5
| threaded rod length 45cm, diameter 0.9cm | 1 | acquired from mechE shop | Spinning threads move forward the rolling frame | $30 |
|
6
| motor fixture | 2 | milling machine/steel | To fix motors to the base/rolling frame | $8 |
|
7
| base | 1 | bend saw/wood piece | Reduced sized base | $5 |
|
8
| apple slicer 18cm x 11cm x 3.5cm | 1 | purchased from Chefmate | To slice apple into 8 pieces | $5 |
|
9
| peeler handle | 1 | taken from original peeler badbath&beyond Inc | To connect all the parts needed for peeling | $3 |
|
10
| peeler blade | 1 | taken from original peeler badbath&beyond Inc | To peel apple skin | $2 |
|
11
| tri-fork rod | 1 | taken from original peeler badbath&beyond Inc | To fix apple in place | $3 |
|
12
| 8 inch corner brace | 2 | purchased from LG sourcing Inc. | To reinforce the slicer | $8 |
|
13
| washer diameter 1.5cm, hole width 0.8cm | 4 | purchased | To fix slicer | $1 |
|
14
| bolt length 3cm, diameter 0.5cm | 2 | purchased | To fix slicer | $1 |
|
15
| butterfly nut hole width 0.5cm | 2 | purchased | To fix slicer | $1 |
|
16
| battery | 2 | come with power drill purchased from Black$Decker GC9600 | power source for the motors | $10 |
|
17
| acrylic board | 4 | purchased from Lowe's | casing of the whole device | $10 |
|