Mop wringer
From DDL Wiki
(→Bill of Materials) |
(→Product Use Steps) |
||
Line 41: | Line 41: | ||
1) Make a mess | 1) Make a mess | ||
+ | |||
+ | [[Image:Mess_1.jpg|150px]] | ||
2) Fill bucket with water | 2) Fill bucket with water | ||
- | [[Image:Fill_Bucket.jpg| | + | [[Image:Fill_Bucket.jpg|150px]] |
3) Add recommended amount of cleaning solution | 3) Add recommended amount of cleaning solution | ||
+ | |||
+ | [[Image:Cleaning_1.jpg|150px]] | ||
4) Put mop in bucket | 4) Put mop in bucket | ||
+ | |||
+ | [[Image:Mop_Bucket.jpg|150px]] | ||
5) Move mop to wringer | 5) Move mop to wringer | ||
+ | |||
+ | [[Image:Wringer.jpg|150px]] | ||
6) Wring mop out | 6) Wring mop out | ||
+ | |||
+ | [[Image:Wring.jpg|150px]] | ||
7) Mop floor (i.e. move back and forth across desired dirty surface) | 7) Mop floor (i.e. move back and forth across desired dirty surface) | ||
+ | |||
+ | [[Image:Mop_1.jpg|150px]] | ||
8) Repeat steps 4-7 until desired cleanliness is achieved | 8) Repeat steps 4-7 until desired cleanliness is achieved | ||
9) Empty bucket | 9) Empty bucket | ||
+ | |||
+ | [[Image:Fill_Bucket.jpg|150px]] | ||
10) Repeat steps 2-3 as desired | 10) Repeat steps 2-3 as desired | ||
Line 67: | Line 81: | ||
1) Make a mess | 1) Make a mess | ||
+ | |||
+ | [[Image:Fill_Bucket.jpg|200px]] | ||
2) Obtain a bucket or container | 2) Obtain a bucket or container | ||
+ | |||
+ | [[Image:Fill_Bucket.jpg|200px]] | ||
3) Fill bucket with water | 3) Fill bucket with water | ||
+ | |||
+ | [[Image:Fill_Bucket.jpg|200px]] | ||
4) Add recommended amount cleaning solution | 4) Add recommended amount cleaning solution | ||
+ | |||
+ | [[Image:Fill_Bucket.jpg|200px]] | ||
5) Put mop in bucket | 5) Put mop in bucket | ||
+ | |||
+ | [[Image:Fill_Bucket.jpg|200px]] | ||
6) Slide wringer towards end of mop over bucket | 6) Slide wringer towards end of mop over bucket | ||
+ | |||
+ | [[Image:Fill_Bucket.jpg|200px]] | ||
7) Mop floor (i.e. move back and forth across desired dirty surface) | 7) Mop floor (i.e. move back and forth across desired dirty surface) | ||
+ | |||
+ | [[Image:Fill_Bucket.jpg|200px]] | ||
8) Repeat steps 5-7 until desired cleanliness is desired | 8) Repeat steps 5-7 until desired cleanliness is desired | ||
9) Empty bucket | 9) Empty bucket | ||
+ | |||
+ | [[Image:Fill_Bucket.jpg|200px]] | ||
10) Repeat steps 3-4 as desired | 10) Repeat steps 3-4 as desired |
Revision as of 21:33, 5 February 2012
Contents |
Stakeholder Analysis
In performing a product use study the following stakeholders, their needs, and desires were identified and documented.
Stakeholder | Needs | Wants |
---|---|---|
Manufacturers | Low cost, Able to mass produced, Easy to assemble, Environmentally friendly, Easy to store and package | |
Investors | Low cost, Significant innovation, Aesthetics, Large market | |
Retailers | Easy to store, Accessory options, Universal interface, Compatibility, Low cost, Utility | |
Cleaning Supply Companies | Universal interface, compatibility | |
Commercial Consumers | Low cost, Durability, Light Weight, Quiet, Intuitive operation, Ergonomic design, Easy to stow, Easy to clean | |
Independent Consumers | Low cost, Aesthetically pleasing, easy to clean, Storability, Portability, Intuitive operation, Light weight, Durability |
Usage
Product Use Steps
Bucket and Mop Combination
1) Make a mess
2) Fill bucket with water
3) Add recommended amount of cleaning solution
4) Put mop in bucket
5) Move mop to wringer
6) Wring mop out
7) Mop floor (i.e. move back and forth across desired dirty surface)
8) Repeat steps 4-7 until desired cleanliness is achieved
9) Empty bucket
10) Repeat steps 2-3 as desired
Folding Mop
1) Make a mess
2) Obtain a bucket or container
3) Fill bucket with water
4) Add recommended amount cleaning solution
5) Put mop in bucket
6) Slide wringer towards end of mop over bucket
7) Mop floor (i.e. move back and forth across desired dirty surface)
8) Repeat steps 5-7 until desired cleanliness is desired
9) Empty bucket
10) Repeat steps 3-4 as desired
Mechanism
Bill of Materials