From DDL Wiki

Contents 1 Executive Summary 2 Stakeholders and Needs 3 Use of the Current Design 4 How the Current Design Functions 5 List of Parts with Functions and Illustrations 6 DFMA 7 FMEA 8 DFE 9 Mechanical Analysis 10 Team Member Roles 11 References

Executive Summary

Executive Summary will go here. Assigned to Jeremy.

Stakeholders and Needs

Stakeholders and Needs will go here. Assigned to Mike.

Use of the Current Design

Use of Current Design will go here. Assigned to Mike.

How the Current Design Functions

Assigned to Mike.

List of Parts with Functions and Illustrations

Assigned to Aaron.

Part Number	Name	Qty.	Weight	Function	Material	Maunfacturing Process	Image
G1	Back Panel/Pickguard Screws	12	.4 g	Fastener for Back Panel	Steel	Die Cast or Rolled	[[Image:|100px]]
G2	Back Panel	1	30 g	Panel for Protecting Rear Bridge mount and tension springs	Plastic	Stamped or Molded	[[Image:|100px]]
G3	Strings	6	2.33g	Strings are plucked to produce sound	Nickel/Steel	Wound	[[Image:|100px]]
G4	Springs	3	10.33g	Used to keep strings under tension, connected to bridge	Steel	Wound	[[Image:|100px]]
G5	Whammy Bar	3	10.33g	A lever which is pressed down to produce tremolo effect by tilting bridge	Steel/Plastic	Cast	[[Image:|100px]]

DFMA

Assigned to Jonathan.

FMEA

Assigned to Jonathan.

DFE

Assigned to Jonathan.

Mechanical Analysis

Assigned to Jeremy.

Team Member Roles

Assigned to Jeremy.

References

ALL GROUP MEMBERS: Please put whatever references you use here in bibliographical format.