Guitar bridge
From DDL Wiki
Contents |
Executive Summary
Executive Summary will go here. Assigned to Jeremy.
Stakeholders and Needs
Stakeholders and Needs will go here. Assigned to Mike.
Use of the Current Design
Use of Current Design will go here. Assigned to Mike.
How the Current Design Functions
Assigned to Mike.
List of Parts with Functions and Illustrations
Assigned to Aaron.
Part Number | Name | Qty. | Weight | Function | Material | Maunfacturing Process | Image |
---|---|---|---|---|---|---|---|
G1 | Back Panel/Pickguard Screws | 12 | .4 g | Fastener for Back Panel | Steel | Die Cast or Rolled | [[Image:|100px]] |
G2 | Back Panel | 1 | 30 g | Panel for Protecting Rear Bridge mount and tension springs | Plastic | Stamped or Molded | [[Image:|100px]] |
G3 | Strings | 6 | 2.33g | Strings are plucked to produce sound | Nickel/Steel | Wound | [[Image:|100px]] |
G4 | Springs | 3 | 10.33g | Used to keep strings under tension, connected to bridge | Steel | Wound | [[Image:|100px]] |
G5 | Whammy Bar | 3 | 10.33g | A lever which is pressed down to produce tremolo effect by tilting bridge | Steel/Plastic | Cast | [[Image:|100px]] |
G6 | Bridge Mounting Screws | 1 | 10g | Fasteners for bridge | Steel | Cast or Rolled | [[Image:|100px]] |
G7 | Bridge (assembly) | 1 | N/A | Used to keep strings connected to guitar body and under tension | N/A | N/A | [[Image:|100px]] |
G8 | Spring Claw | 1 | 12g | Used to mount springs onto guitar body | Steel | Cast or Stamped | [[Image:|100px]] |
G9 | Spring Claw Screws | 2 | 2.5g | Used to fasten spring claw to guitar body | Steel | Cast or Rolled | [[Image:|100px]] |
G10 | Saddle Plate | 6 | 8.5g | Mounting point for strings in bridge | Brass | Cast or Stamped | [[Image:|100px]] |
G11 | Saddle Spring | 6 | .166g | Maintains string tension in bridge while still allowing strings to move | Steel | Cast or Stamped | [[Image:|100px]] |
G12 | Saddle Screw | 6 | .833g | Fastens Saddles to bridge plate | Steel | Cast or Rolled | [[Image:|100px]] |
G13 | Neck | 1 | 736g | Part of guitar body, Frets and tuning equipment attached to neck | Wood | Carved or Machined | [[Image:|100px]] |
G14 | Neck Mounting Plate | 1 | 57g | Used to mount neck to body | Steel/Plastic | Stamped | [[Image:|100px]] |
G15 | Bridge Block | 1 | 69g | Used to keep tension in strings, pass strings through bridge into body of guitar | Steel | Cast | [[Image:|100px]] |
G16 | Bridge Block Mounting Screws | 3 | .666g | Used to fasten bridge block to bridge assembly | Steel | Cast or Rolled | [[Image:|100px]] |
G17 | Guitar Body | 1 | N/A | Main body of guitar, contains bridge, strings, electronics | Wood | Carved or machined | [[Image:|100px]] |
DFMA
Assigned to Jonathan.
FMEA
Assigned to Jonathan.
DFE
Assigned to Jonathan.
Mechanical Analysis
Assigned to Jeremy.
Team Member Roles
Assigned to Jeremy.
References
ALL GROUP MEMBERS: Please put whatever references you use here in bibliographical format.