Lamp stand mechanical arm redesign

From DDL Wiki

Revision as of 07:50, 7 October 2008 by Raysel7 (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search

Stakeholders

  • Retail
    • Small packaging to allow for less space taken up on the shelf
    • Light weight for easy movement
    • No fork lift required for movement of product in bulk
    • Low bulk purchase cost
    • Reliable to ensure minimal product returns or exchanges
  • Consumer
    • Low cost option relative to utility obtained from product
    • Precise placement of light source can be obtained throughout the life of the lamp.
    • Stable fixture for light source
    • Eliminate the need to touch hot surfaces while lamp is in use
    • No assembly required. If it is required no tooling or instructions required
    • Movement of light source can be obtained with minimal force needed.
    • Aesthetically appealing
    • No injury incurred while using lamp
    • Maximum brightness of light source to illuminate large area
    • Light source (bulb or LED) should not be visible to the user during normal use
    • Easy on/off mechanism
    • Long cord, but short enough so it does not cause too much apparent clutter.
    • Light weight and easy to transport
    • Packaging with sufficient information to ensure product can meet needs of customer
Retrieved from "https://wiki.ece.cmu.edu/ddl/index.php/Lamp_stand_mechanical_arm_redesign"
Personal tools