From DDL Wiki
(Difference between revisions)
|
|
Line 35: |
Line 35: |
| |- | | |- |
| ! 9 | | ! 9 |
- | | 8 inch corner brace || 1 || purchased from LG sourcing Inc. || To reinforce the slicer || $5 || [[Image:corner brace.jpg|150px|]] | + | | 8 inch corner brace || 1 || purchased from LG sourcing Inc. || To reinforce the slicer || $8 || [[Image:corner brace.jpg|150px|]] |
| |- | | |- |
| ! 10 | | ! 10 |
- | | washer, diameter 1.5cm, hole width 0.8cm || 2 ||purchased || To fix slicer || $5 || [[Image:washer.jpg|150px|]] | + | | washer, diameter 1.5cm, hole width 0.8cm || 2 ||purchased || To fix slicer || $1 || [[Image:washer.jpg|150px|]] |
| |- | | |- |
| ! 11 | | ! 11 |
- | | bolt, length 3cm, diameter 0.5cm || 1 || purchased || To fix slicer || $5 || [[Image:bolt1.jpg|150px|]] | + | | bolt, length 3cm, diameter 0.5cm || 1 || purchased || To fix slicer || $1 || [[Image:bolt1.jpg|150px|]] |
| |- | | |- |
| ! 12 | | ! 12 |
- | | butterfly nut, hole width 0.5cm || 1 || purchased || To fix slicer || $5 || [[Image:nut1.jpg|150px|]] | + | | butterfly nut, hole width 0.5cm || 1 || purchased || To fix slicer || $1 || [[Image:nut1.jpg|150px|]] |
| |- | | |- |
| ! 13 | | ! 13 |
Revision as of 21:50, 7 December 2009
Design Documentation
Following table is the list of materials used for the final prototype.
Part Number | Name | Quantity | Manufacture Process/material | Function | (estimated)Cost | CAD drawing
|
1
| motor | 2 | purchased | First motor rotates the rods to move second motor along the path. Second motor rotates the tri-fork | ? |
|
2
| rolling frame | 1 | metal sheet bending/steel sheet | A stable carriage for the second motor | $12 |
|
3
| clear rod length 45cm | 1 | // | To stabilize the rolling frame from being overturned | $10 |
|
4
| clear rod bushing | 1 | milling machine/steel | To fix the clear rod | $5 |
|
5
| threaded rod, length 45cm, diameter 0.9cm | 2 | // | Spinning threads move forward the rolling frame | $30 |
|
6
| motor fixture | 1 | milling machine/steel | To fix motors to the base/rolling frame | $8 |
|
7
| base | 1 | bend saw/wood piece | Reduced sized base | $5 |
|
8
| apple slicer | 1 | purchased from Chefmate | To slice apple into 8 pieces | $5 |
|
9
| 8 inch corner brace | 1 | purchased from LG sourcing Inc. | To reinforce the slicer | $8 |
|
10
| washer, diameter 1.5cm, hole width 0.8cm | 2 | purchased | To fix slicer | $1 |
|
11
| bolt, length 3cm, diameter 0.5cm | 1 | purchased | To fix slicer | $1 |
|
12
| butterfly nut, hole width 0.5cm | 1 | purchased | To fix slicer | $1 |
|
13
| peeler handle | 1 | taken from original peeler | To connect all the parts needed for peeling | $5 |
|
14
| peeler blade | 1 | taken from original peeler | To peel apple skin | $2 |
|
15
| tri-fork rod | 1 | taken from original peeler | To fix apple in place | $5 |
|