Automatic can opener
From DDL Wiki
(Difference between revisions)
(Function and Inputs Outputs) |
(Use) |
||
| Line 1: | Line 1: | ||
| - | |||
=Product Dissection= | =Product Dissection= | ||
The following notes were taken prior to and during [[product dissection]]. | The following notes were taken prior to and during [[product dissection]]. | ||
| Line 15: | Line 14: | ||
==Use:== | ==Use:== | ||
| - | + | 1. Opener is removed from storage place and placed in position on top of can. | |
| + | <br />2. Button is held until opener begins to move. | ||
| + | <br />3. Let go and wait for opener to finish. | ||
| + | * If the can is larger than a standard soup can multiple cycles must be used. | ||
| + | 4. Lift the opener off of the can. | ||
| + | * Because of the magnet, this also lifts the top off of the can. | ||
| + | 5. Remove top of can from opener and replace opener in storage place. | ||
==Functional Operation:== | ==Functional Operation:== | ||
Revision as of 18:14, 28 January 2007
Contents |
Product Dissection
The following notes were taken prior to and during product dissection.
Function/Purpose:
This can opener provides a low effort method to opening any size can.
Inputs/Outputs:
- INPUTS: Battery Power
- INPUTS: Positioning of opener
- INPUTS: Press button until unit begins to move
- OUTPUTS: Cut through can to open
- OUTPUTS: Rotates around can
Use:
1. Opener is removed from storage place and placed in position on top of can.
2. Button is held until opener begins to move.
3. Let go and wait for opener to finish.
- If the can is larger than a standard soup can multiple cycles must be used.
4. Lift the opener off of the can.
- Because of the magnet, this also lifts the top off of the can.
5. Remove top of can from opener and replace opener in storage place.
