From DDL Wiki
(Difference between revisions)
Revision as of 05:19, 31 January 2007
Function:
- Shuffles cards (playing cards).
- Speed up the shuffling process.
- Shuffles cards for people who can't shuffle.
- Eliminates the possibility of someone cheating whiles shuffling.
- Stacks the cards nicely after shuffling.
- Speeds up the game (people don't have to take turns shuffling
Inputs/Outputs
- Cards (Inputs)
- Batteries (Inputs)
- Tray (Inputs)
- Shuffled cards (Output)
- Cards stacked neatly in tray (Output)
Use
- Place Batteries (2) in the card shuffler.
- set the card shuffler on the table.
- Set the card shuffler to where everyone can see.
- devide the deck of cards in half.
- place one half on the right of the card shuffler.
- Place the other half of cards on the left.
- Place tray in card shuffler.
- Tray goes in the bottom slot of the card holder.
- Press the button to initiate shuffling process.
- Botton located at the bottom in front of the tray slot.
- When shuffling is complete, remove tray and retrieve cards.
Different Use/ Use Scenarios
- Poker
- Spades (game)
- Speed (game)
- Parties
List of Parts
Part # | Part name | QTY | Function |
|
001 | Small Screws | 4 | Holds top plastic screen in place |
|
002 | Medium Screws | 3 | Located on bottom of case in triangular formation, under the card tray |
|
003 | Large Screws | 8 | Located along other perimeter on botom of case, to hold case togather/hold the gear train case |
|
004 | Clear Top Cover | 1 | Located on top of case in between decks provides slot for cards to slide thrugh. Also, keep the rest of the deck in place by not allowing more card to pass through |
|
005 | Operating Button | 1 | Contacts metal piece beneath to complete circuit allowing both motors to operate |
|
006 | Conducting Wire | 5 | Setup in series and connected to the battery. Circuit completed when part 005 is pushed and held down |
|
007 | Motor | 2 | Initiated the power to make the gear rotate in order to shuffle the cards |
|
008 | Robber Gripper | 2 | Increase the friction force to grab the cards into the tray |
|
009 | Spur Gear | 2 | Change the direction of gear rotates and create more torque |
|
010 | Offset Gear | 2 | Gears down the power and gain more mechanism |
|
011 | Gear Case | 1 | Covered and protected the gear train tool |
|
012 | Battery Component | 1 | Transfer the electrical power into mechanical power |
|