Automatic pet feeder
From DDL Wiki
(Difference between revisions)
(→Product Usage) |
(→Mechanical Function) |
||
Line 9: | Line 9: | ||
==Mechanical Function== | ==Mechanical Function== | ||
+ | The feeder accepts food from the hopper located above. The feeder contains four sets of fins, each connected to an axis parallel to the floor. | ||
+ | |||
==Mechanical Analysis== | ==Mechanical Analysis== | ||
==Bill of Materials== | ==Bill of Materials== |
Revision as of 22:55, 17 September 2009
Contents |
Executive Summary
Stakeholders and Needs
Product Usage
Insert 3 D cell batteries, or plug an AC adapter to power the feeder. Assemble the feeder by attaching the dish to the feeder near the opening at the bottom. The hopper that holds the food attaches to the top of the base with a simple rotation that locks it in place. The top to the hopper works in the same manner, where a small rotation of the hopper cover locks it in place.
The Hopper should be filled with pet food of the owner's choice, so long as the food is not moist or significantly large e.g. a dog treat. Turn the feeder on using the switch on the bottom.
Mechanical Function
The feeder accepts food from the hopper located above. The feeder contains four sets of fins, each connected to an axis parallel to the floor.