Bike pump
From DDL Wiki
(New page: ==Executive Summary== This will be a paragraph summarizing the product and project. Blah blah blah... ==Product Stakeholders== This will be information summarizing the product stake hol...) |
|||
| Line 1: | Line 1: | ||
==Executive Summary== | ==Executive Summary== | ||
| - | This will be a | + | This will be a brief executive summary that describes the key findings and recommendations. |
| + | |||
==Product Stakeholders== | ==Product Stakeholders== | ||
| - | This will | + | This is where we will identify major stakeholders (post-production) and list major product needs for each stakeholder. |
| + | |||
==Product Use Study== | ==Product Use Study== | ||
| + | This is where we will document in detail how the product is used, step by step, and summarize findings from our user studies with photo documentation. | ||
| + | |||
| + | |||
| + | ==Product Mechanical Function== | ||
| + | We will include some pretty diagrams and information about the mechanical function of our part. | ||
| + | |||
| + | ==Assembly== | ||
| + | This is where we will have information/photo about the major assembly. | ||
| + | |||
| + | ===Sub-Assembly=== | ||
| + | We may need to include detailed sub-assembly photos and information here. | ||
| + | |||
| + | ===Bill of Materials=== | ||
| + | We will also include a bill of materials for each major sub-assembly, right down to the very last screw. We will include pictures of the assembly with all components labeled. | ||
| + | |||
| + | |||
| + | |||
| + | {| | ||
| + | |- | ||
| + | ! Part Number | ||
| + | ! Part Name | ||
| + | ! QTY | ||
| + | ! Mass (g) | ||
| + | ! Function | ||
| + | ! Material | ||
| + | ! Manufacturing Process | ||
| + | |- | ||
| + | | Row 1, column 1 | ||
| + | | Row 1, column 2 | ||
| + | | Row 1, column 3 | ||
| + | |- | ||
| + | | Row 2, column 1 | ||
| + | | Row 2, column 2 | ||
| + | | Row 2, column 3 | ||
| + | |} | ||
| + | |||
| + | |||
| + | ==Design for Manufacturing and Assembly== | ||
| + | Explanation of what is to come below... | ||
| + | |||
| + | |||
| + | ===Manufacturing=== | ||
| + | Wow! Manufacturing sure is neat. | ||
| + | |||
| + | |||
| + | ===Assembly=== | ||
| + | Cool assembly information will go here.. | ||
| + | |||
| + | |||
| + | ==Failure Mode Effect and Analysis== | ||
| + | Sweet information from JR and Lauren shall populate this space... | ||
| + | |||
| + | |||
| + | ==Design for Environment== | ||
| + | Amber shall populate this space with some cool graphs and knowledge. | ||
| + | |||
| + | |||
| + | ==Group Dynamic== | ||
| + | |||
| + | Team Leader: Dinesh Ayyappan | ||
| + | |||
| + | DFMA Lead: Patrick Hogan | ||
| + | |||
| + | FMEA Lead: Jonathan Wong | ||
| + | |||
| + | DFE Lead: Amber Ohiokpehai | ||
| + | |||
| + | Wiki Page Programmer/Report Compilation: Lauren Milisits | ||
| + | |||
| + | |||
| + | ==References== | ||
| - | + | This is where we should list any references that we used throughout the process of our report. | |
Revision as of 16:53, 9 September 2012
Contents |
Executive Summary
This will be a brief executive summary that describes the key findings and recommendations.
Product Stakeholders
This is where we will identify major stakeholders (post-production) and list major product needs for each stakeholder.
Product Use Study
This is where we will document in detail how the product is used, step by step, and summarize findings from our user studies with photo documentation.
Product Mechanical Function
We will include some pretty diagrams and information about the mechanical function of our part.
Assembly
This is where we will have information/photo about the major assembly.
Sub-Assembly
We may need to include detailed sub-assembly photos and information here.
Bill of Materials
We will also include a bill of materials for each major sub-assembly, right down to the very last screw. We will include pictures of the assembly with all components labeled.
| Part Number | Part Name | QTY | Mass (g) | Function | Material | Manufacturing Process |
|---|---|---|---|---|---|---|
| Row 1, column 1 | Row 1, column 2 | Row 1, column 3 | ||||
| Row 2, column 1 | Row 2, column 2 | Row 2, column 3 |
Design for Manufacturing and Assembly
Explanation of what is to come below...
Manufacturing
Wow! Manufacturing sure is neat.
Assembly
Cool assembly information will go here..
Failure Mode Effect and Analysis
Sweet information from JR and Lauren shall populate this space...
Design for Environment
Amber shall populate this space with some cool graphs and knowledge.
Group Dynamic
Team Leader: Dinesh Ayyappan
DFMA Lead: Patrick Hogan
FMEA Lead: Jonathan Wong
DFE Lead: Amber Ohiokpehai
Wiki Page Programmer/Report Compilation: Lauren Milisits
References
This is where we should list any references that we used throughout the process of our report.
