Car jack
From DDL Wiki
Contents |
About
This is the project Wiki for Team 8 in 24-441 Engineering Design Course. The product we have chosen to analyze is a car jack.
Group Members
- Matt Wasserman
- Alberto Guzman
- Saran Soongsawang
Product Dissection
Documentation of Team 8's Product Dissection
Function
- Typically used to lift up the corner of a car, normally for changing a tire.
Input
- Crank, which rotates threaded rod
Output
- Vertical motion up or down that locks in place
Normal Use
- User kneels down in next to car.
- Jack is placed flat under car.
- Crank arm end placed into eyelet or car.
- Crank arm held up in one hand and rotated clockwise with the other.
- When upward motion of jack gets close to car frame, user aligns jack as necessary make sure it lift on the correct part of the car frame.
- User continues to rotate crank arm as the jack lifts the car until the desired height is reached.
- After the user is done changing the tire the crank arm is rotated counter-clockwise until the jack is completely closed