Car jack product dissection
From DDL Wiki
(Difference between revisions)
(→Bill of Materials) |
(→Bill of Materials) |
||
Line 17: | Line 17: | ||
|0005||Left Pin||1||6.0||Tapped with matching thread to hold and allow threaded rot to rotate, also connects lower and upper left arms||Steel|| | |0005||Left Pin||1||6.0||Tapped with matching thread to hold and allow threaded rot to rotate, also connects lower and upper left arms||Steel|| | ||
|- | |- | ||
- | |0006||Right Pin|1||5.7||Acts as a top for thrust bearing, connects right lower and upper arms, holds in position and serves as a guide for threaded rod||Steel|| | + | |0006||Right Pin||1||5.7||Acts as a top for thrust bearing, connects right lower and upper arms, holds in position and serves as a guide for threaded rod||Steel|| |
|- | |- | ||
|0007|| | |0007|| | ||
|} | |} |
Revision as of 22:59, 28 January 2007
Dissection Process
Bill of Materials
Part # | Part Name | Qty. | Weight(oz.) | Function | Material | Manufacturing Process |
---|---|---|---|---|---|---|
0001 | Base | 1 | 14.7 | Connection point for lower arms, supports jack against ground | Steel, powder coated | Stamped and bent |
0002 | Lower Arm | 2 | 12.2 | Lower part of 4-bar linkage that makes up jack | Steel, powder coated | Stamped and bent |
0003 | Upper Arm | 2 | 12.2 | Upper part of 4-bar linkage that make up jack | Steel | Stamped and bent |
0004 | Top | 1 | 6.2 | Connects upper arms, links 4-bar linkage, connection point and support for vehicle | Steel, powder coated | Stamped and bent |
0005 | Left Pin | 1 | 6.0 | Tapped with matching thread to hold and allow threaded rot to rotate, also connects lower and upper left arms | Steel | |
0006 | Right Pin | 1 | 5.7 | Acts as a top for thrust bearing, connects right lower and upper arms, holds in position and serves as a guide for threaded rod | Steel | |
0007 |