Car jack product dissection
From DDL Wiki
(Difference between revisions)
(→Bill of Materials) |
(→Bill of Materials) |
||
Line 5: | Line 5: | ||
=Bill of Materials= | =Bill of Materials= | ||
{| class="wikitable" border='1' | {| class="wikitable" border='1' | ||
- | !Part #!!Part Name!!Qty.!!Weight(oz.)!!Function!!Material!!Manufacturing Process | + | !Part #!!Part Name!!Qty.!!Weight(oz.)!!Function!!Material!!Manufacturing Process!!Images |
|- | |- | ||
|0001||Base||1||14.7||Connection point for lower arms, supports jack against ground||Steel, powder coated||Stamped and bent | |0001||Base||1||14.7||Connection point for lower arms, supports jack against ground||Steel, powder coated||Stamped and bent |
Revision as of 23:03, 28 January 2007
Dissection Process
Bill of Materials
Part # | Part Name | Qty. | Weight(oz.) | Function | Material | Manufacturing Process | Images |
---|---|---|---|---|---|---|---|
0001 | Base | 1 | 14.7 | Connection point for lower arms, supports jack against ground | Steel, powder coated | Stamped and bent | |
0002 | Lower Arm | 2 | 12.2 | Lower part of 4-bar linkage that makes up jack | Steel, powder coated | Stamped and bent | |
0003 | Upper Arm | 2 | 12.2 | Upper part of 4-bar linkage that make up jack | Steel | Stamped and bent | |
0004 | Top | 1 | 6.2 | Connects upper arms, links 4-bar linkage, connection point and support for vehicle | Steel, powder coated | Stamped and bent | |
0005 | Left Pin | 1 | 6.0 | Tapped with matching thread to hold and allow threaded rot to rotate, also connects lower and upper left arms | Steel | ||
0006 | Right Pin | 1 | 5.7 | Acts as a top for thrust bearing, connects right lower and upper arms, holds in position and serves as a guide for threaded rod | Steel | ||
0007 |