Ceiling-mounted bicycle lift
From DDL Wiki
(Difference between revisions)
(→Setup:) |
(→Setup:) |
||
| Line 16: | Line 16: | ||
3.) Transfer this measurement to the wood board and draw a line resembling the front of the handle bars and a line for the back of the bike. | 3.) Transfer this measurement to the wood board and draw a line resembling the front of the handle bars and a line for the back of the bike. | ||
| - | 4.) Set the two black brackets on the board so that the the hole between the two pulleys on the | + | 4.) Set the two black brackets on the board so that the the hole between the two pulleys on the bracket with two pulleys and the second hole in on the other bracket show the lines. (Picture Shown) |
==Use:== | ==Use:== | ||
Revision as of 20:48, 28 January 2007
Contents |
Product Dissection
The following notes were taken prior to and during product dissection.
Function/Purpose:
Raises and stores a bike near the ceiling of a room
Inputs/Outputs:
Setup:
1.) Open box and unpack all parts making sure everything has been included.
2.) Measure distance between the back of the seat and the front of the handle bars on the bike that will be used.
3.) Transfer this measurement to the wood board and draw a line resembling the front of the handle bars and a line for the back of the bike.
4.) Set the two black brackets on the board so that the the hole between the two pulleys on the bracket with two pulleys and the second hole in on the other bracket show the lines. (Picture Shown)
Use:
Different Users / Use Scenarios
Functional Operation:
| Part # | Part name | QTY | Function | Wt.(oz.) | |
|---|---|---|---|---|---|
| 001 | Bracket Washer | 5 | Distributes force applied by bracket bolt | <.1 | |
| 002 | Bracket Nut | 5 | Secures bracket bolt to mount | .1 | |
| 003 | Bracket Bolt | 5 | Connects two brackets with washer and nut | .1 | |
| 004 | Hook Washer | 4 | Distrubutes force applied by hook bolt | <.1 | |
| 005 | Hook Nut | 4 | Secures hook bolt with washer and nut | .1 | |
| 006 | Hook Bolt | 4 | Connects bracket to hook with washer and nut | .1 | |
| 007 | Ceiling Bracket | 2 | Secures and connects breackets and pulleys to ceiing with screws | 7.4 | |
| 008 | Hook | 4 | Connects bike to lift | 1.5 | |
| 009 | V-Bracket | 2 | Connects hooks to u-pulley mount | 1.5 | |
| 010 | U-Pulley Mount | 4 | Houses pulley assembly, Connects brackets to rope and ceiling bracket | # | |
| 011 | 48' Rope | 1 | Secures bike and pulleys using wall rope tie | 6.5 | |
| 012 | Wall Rope Tie | 1 | Ties rope to wall and stores excess rope | 2.1 | |
| 013 | Pulley | 5 | Provides mechanical advantage in lifting bike | # | |
| 014 | Rivet | 7 | Connects pulleys and l-clutches to mount | # | |
| 015 | Clutch Pulley Mount | 1 | Houses pulley assembly with clutch | # | |
| 016 | Large L-Clutch | 1 | Prevents rope from slipping during lowering process | # | |
| 017 | Small L-Clutch | 1 | Prevents rope from slipping | # | |
| 018 | Ceiling Screws | 10 | Secures ceiling bracket to ceiling | .2 |
Component Weights(oz.):
U-Pulley + Rivet + Pulley = 3.8
Clutch Pulley Mount + 3 Rivets + Pulley + Large L-Clutch + Small L-Clutch = 4.8
