Lawn Mower Analysis
From DDL Wiki
(→Purpose of Analysis) |
(→Assumptions) |
||
| Line 11: | Line 11: | ||
*We will ignore the weight of the hardware and delrin rollers. We will assume that their weights are insignificant when compared with the weights of the steel tubing and steel plate. | *We will ignore the weight of the hardware and delrin rollers. We will assume that their weights are insignificant when compared with the weights of the steel tubing and steel plate. | ||
| + | |||
| + | *Ignore vibrations and resonance effects due to driving. | ||
= Symbols and Equations = | = Symbols and Equations = | ||
= Conclusion = | = Conclusion = | ||
= Implementation = | = Implementation = | ||
Revision as of 19:24, 10 November 2008
Contents |
Executive Summary
Purpose of Analysis
The purpose of this analysis is to verify that the appropriate design choices and material choices have been made. After consulting specialists in the Carnegie Mellon Machine Shop, we have come up with a design that is anticipated to function as proposed while addressing key concerns such as weight, packaging, manufacturing, and material cost. We found that it would not make sense to try to optimize the lengths and thicknesses of most materials because the sizes we will be using are fairly standard and will hold up to the forces that it will encounter. Our mechanical analysis will verify that these standard sizes will be sufficient and optimal for our design. By using standard sizes we can also save on our material costs.
The analysis will also provide an overall factor of safety for the mechanism.
Assumptions
- We will be assume that all bodies connected by welds are to be considered one single body.
- We will ignore the weight of the hardware and delrin rollers. We will assume that their weights are insignificant when compared with the weights of the steel tubing and steel plate.
- Ignore vibrations and resonance effects due to driving.
