Leaf blower
From DDL Wiki
(Difference between revisions)
(→Product Components) |
m (→Product Components) |
||
Line 23: | Line 23: | ||
|- | |- | ||
! 001 | ! 001 | ||
- | | Screw || 15 || Hold case together, hold bracket down || Steel || | + | | Screw || 15 || Hold case together, hold bracket down || Steel || Standard item || 1 || |
|- | |- | ||
! 002 | ! 002 |
Revision as of 16:07, 9 September 2009
Contents |
Executive Summary
Stakeholders and Stakeholder Needs
Product Use and Function
Product Use
Product Design and Function
Motor
Safeties and Interlocks
Power Control
Product Components
Part Number | Description | Quantity | Function | Material | Manufacturing | Mass (g) | Picture |
---|---|---|---|---|---|---|---|
001 | Screw | 15 | Hold case together, hold bracket down | Steel | Standard item | 1 | |
002 | Housing Right Side | 1 | Protect motor | Plastic | Injection Molded | 546 | |
003 | Housing Left Side | 1 | Protect motor | Plastic | Injection Molded | 534 | |
004 | Mulcher/Fan blade guard | 1 | Protect user from blade | Plastic | Injection Molded | 204 | |
005 | Chute Locking Tab | 1 | Hold chute on housing | Plastic | Injection Molded | 14 | |
006 | Bottom Attachments Release Tab | 1 | Release bottom attachments for removal | Plastic | Injection Molded | 13 | |
007 | Chute Locking Tab Spring | 1 | Hold Chute locking tab in place | steel | drawn | 13 | |
008 | Torsion bar for heal release | 1 | Holds heel release in place and allows for unlocking | Steel | Bent | 13 | |
009 | Bottom Attachment Interlock Trigger | 1 | Depresses contact for bottom safety interlock | Plastic | Injection Molded | 10 | |
010 | Spring for interlock trip | 1 | Holds trigger in off position when attachment is not installed | Steel | Drawn | 1 | |
011 | Heel Attachment Safety Switch Assembly | 1 | Allows operation only when bottom attachment/guard is installed | Plastic, Steel, Copper | Injection molding, stamping | 1 | |
012 | Wire Bracket | 1 | Holds wires in place | Steel | Stamped | 6 | |
013 | Male Connector | 2 | Connects components in electrical circuit | Steel | Punched | N/A | |
014 | Male Connector Insulator | 2 | Protects connections from contacting other electrical components | Plastic | Injection Molded | 1 | |
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX | |||||||
XXX |