Microphone stand
From DDL Wiki
(Difference between revisions)
(→Customer Needs) |
(→Customer Needs) |
||
Line 6: | Line 6: | ||
== Customer Needs == | == Customer Needs == | ||
- | + | ||
- | + | This device is primarily a precision positioning mechanism that can move in any direction. It is designed such that it has multiple degrees of freedom to increase the usability for the user. Some of the main users are disc jockeys or radio stations who need a stand for their microphones. This microphone was designed to be a hands-free device and would eliminate the need for the user to have to physically hold the microphone in place in a particular location. | |
+ | |||
-Portability | -Portability | ||
-Small Footprint | -Small Footprint |
Revision as of 16:27, 19 September 2007
This page was compiled as a project for the 24-441 Engineering Design Course at Carnegie Mellon University.
Executive Summary
Customer Needs
This device is primarily a precision positioning mechanism that can move in any direction. It is designed such that it has multiple degrees of freedom to increase the usability for the user. Some of the main users are disc jockeys or radio stations who need a stand for their microphones. This microphone was designed to be a hands-free device and would eliminate the need for the user to have to physically hold the microphone in place in a particular location.
-Portability -Small Footprint -Small overall size -Inexpensive -Durable/Reusable
Product Dissection
Part # | Part Name | Qty. | Function | Weight (g) | Material | Manufacturing Process | Photo |
---|---|---|---|---|---|---|---|
01 | Knurled knob | 1 | Friction knob to hold microphone in place | 6 | Plastic | Injection molding | |
02 | Lock washer (small) | 2 | Spacer between bolt and surface | 0.15 | Steel | Casting | |
03 | Headless bolt | 1 | Holds microphone attachment in place | 2 | Steel | Casting | |
04 | Microphone attachment | 1 | Holds microphone by threaded rod | 47 | Steel | Casting | |
05 | Grasping clamp | 2 | Clamps microphone attachment in place | 13 | Steel | Casting | |
06 | Grasping pin | 1 | Aligns grasping clamps | 0.5 | Brass | Extrusion | |
07 | Lock washer (large) | 1 | Spacer between bolt and surface | 0.2 | Steel | Casting | |
08 | Bolt | 4 | Holds upper angled plate sub-assembly | 2.5 | Steel | Casting | |
09 | Angled plate - bent | 2 | Holds frame to attachment | 11 | Sheet metal | Stamping/bending | |
10 | Upper spring | 2 | Counteracts weight of microphone | 53 | Steel | Wrapped wire extrusion | |
11 | Upper spring attachment | 4 | Holds spring in place | 2 | Steel | Casting/turning | |
12 | Threaded rod | 2 | Holds attachments together | 4 | Steel | Casting | |
13 | Bar linkage | 5 | Linkage, houses XLR cable | 94 | Sheet metal | Extrusion | |
14 | End fitting cap | 4 | Upper linkage cap, guides XLR cable | (n/a) | Plastic | Injection Molding | |
15 | Lock washer (medium) | 2 | Spacer between bolt and surface | 0.2 | Steel | Casting | |
16 | Nut | 3 | Tightens fixture | 0.5 | Steel | Casting | |
17 | Headless 1/2-threaded rod | 1 | Connects lower and upper sections | 4 | Steel | Casting | |
18 | Spacer (medium) | 2 | Spacer for central sub-assembly | 0.5 | Steel | Casting | |
19 | Spacer washer | 1 | Holds central sub-assembly | 0.2 | Steel | Casting | |
20 | Washer (medium) | 1 | Holds central sub-assembly | 0.2 | Steel | Casting | |
21 | Tightening cap | 1 | Tightens upper to lower section connection, secures joint angle | 3 | Plastic | Injection molding | |
22 | Angled plate - flat | 2 | Base for upper to lower connection | 10 | Sheet metal | Stamping | |
23 | End fitting cap (flat) | 2 | Upper linkage cap | (n/a) | Plastic | Injection molding | |
24 | Spacer (large) | 3 | Spacer for lower sub-assembly | 2 | Steel | Casting | |
25 | Long 1/4-threaded rod | 1 | Holds lower sub-assembly | 5 | Steel | Casting | |
26 | Spacing bolt/rod | 1 | Spaces and holds lower springs | 2 | Steel | Turning | |
27 | Lower spring | 2 | Counteracts weight of microphone | 35 | Steel | Wrapped wire extrusion | |
28 | Lower spring attachment | 2 | Holds spring in place | 2 | Steel | Turning | |
29 | Base bracket | 1 | Connects frame to mounting section | 47 | Sheet metal | Stamping/bending | |
30 | White bushing | 1 | Protects and guides XLR cable | 0.5 | Plastic | Injection molding | |
31 | XLR cable | 1 | Carries signal to microphone | 50 | Various | Electric |