Oscillating fan
From DDL Wiki
(Difference between revisions)
Line 8: | Line 8: | ||
! Swivel Mount | ! Swivel Mount | ||
- | | Nut Stripping, Plastic Fracture || Cannot Adjust Vertical Directoin | + | | Nut Stripping, Plastic Fracture || Cannot Adjust Vertical Directoin Fan Cannot Effectively Circulate Air || 8 || Overtightening, Material Failure ||3 ||Overtightened Screw, Force applied on Swivel Area ||1 ||cell 1,1 ||cell 1,1 ||cell 1,1 ||cell 1,1 ||cell 1,1 ||cell 1,1 ||cell 1,1 ||cell 1,1 |
|- | |- | ||
! Row header 1 | ! Row header 1 |
Revision as of 21:34, 18 September 2007
Item and Function | Failure Mode | Effects of Failure | S | Causes of Failure | O | Design Controls | D | RPN | Recommended Action | Responsibility and Deadline | Actions Taken | S | O | D | RPN |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Motor/Shaft | Inhibited Rotation | Inefficient Operation | 5 | Debris (e.g. dust) in Fan | 4 | Run Under Extreme Dust and Debris Conditions | 2 | 40 | Filter, Accessibility for Cleaning, Better Protection of Rotating Parts | Motor Housing | - | 5 | 3 | 2 | 30 |
Swivel Mount | Nut Stripping, Plastic Fracture | Cannot Adjust Vertical Directoin Fan Cannot Effectively Circulate Air | 8 | Overtightening, Material Failure | 3 | Overtightened Screw, Force applied on Swivel Area | 1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 |
Row header 1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 |
Row header 1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 |
Row header 1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 | cell 1,1 |