Remote control tarantula

From DDL Wiki

Revision as of 09:40, 21 September 2007 (view source) Csulliva (Talk | contribs) (→Components:) ← Older edit		Revision as of 09:41, 21 September 2007 (view source) Csulliva (Talk | contribs) (→FMEA) Newer edit →
Line 181:		Line 181:
	==Design for manufacturing and assembly==		==Design for manufacturing and assembly==
-	==FMEA==	+	==Failure mode effects analysis==
		+
	==DFE==		==DFE==
	==EIOLCA==		==EIOLCA==

---

Revision as of 09:41, 21 September 2007

Contents 1 Executive summary 2 Customer needs 3 Function 4 Product use 5 Components: 6 Design for manufacturing and assembly 7 Failure mode effects analysis 8 DFE 9 EIOLCA

Executive summary

Customer needs

Function

Product use

Components:

Part #	Part name	QTY	Function	Materials	Manufacturing Process	Picture
001	Cover Screws	13	Holds bottom cover in place	Steel	Cold headed, Thread Rolled
002	Inner Flat-headed screw	2	Holds circuit board and LED eye in place on interior of machine	Steel	Cold headed, Thread rolled
003	Battery Cover	1	Covers, protects bottom of tarantula	Plastic	Injection Molded, hand modified
004	Back Wheel housing	1	Covers rear wheels Holds rear wheels in place	Plastic	Injection Molded
005	Back Wheel	2	Holds weight of majority of tarantula, allows it to roll on ground	Plastic	Injection Molded, smoothed
006	Small Leg	4	Aesthetic legs that move asymmetrically as tarantula rolls	Plastic	Injection Molded
007	Medium Leg	2	Aesthetic legs that move asymmetrically as tarantula rolls	Plastic	Injection Molded
008	Large leg	2	Aesthetic legs that move asymmetrically as tarantula rolls	Plastic	Injection Molded
009	Feelers	2	Aesthetic feelers that are in a fixed, forward-facing position to mimic a spider	Plastic	Injection Molded
010	Driving Wheel 1	1	Takes torque of motor, drives the front axle Off-center axle hole	Plastic	Injection Molded, smoothed
011	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
012	Plastic Protection housing	1	Holds motor and gearing in place on interior of robot Provides internal support for robot	Plastic	Injection Molded
013	Back Wheel Axle	2	Each axle has a Back wheel fitted on it, allows back wheels to roll	Metal	Cut wire, smoothed
014	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
015	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
016	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
017	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
018	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
019	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
020	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
021	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
022	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
023	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
024	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
025	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
026	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
027	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
028	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
029	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
030	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
031	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
032	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
033	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
034	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed
035	Driving Wheel 2	1	Shares axle with Driving wheel 1 Off-center axle hole	Plastic	Injection Molded, smoothed

Design for manufacturing and assembly

Failure mode effects analysis

DFE

EIOLCA