From DDL Wiki

Revision as of 18:22, 23 September 2007

Executive Summary

Product

Function

Product Uses

Customer Needs

Bill of Materials

Part #	Name	Quantity	Weight	Function	Manufacturing Process	Material	Image
A-001	Short Screw	4	< 1g	Holds plastic cover on vacuum head	?	?
A-002	Long Screw	1	< 1g	Holds plastic cover on vacuum head	?	?
A-003	Small Screw	2	< 1g	Holds cover on vaccum channel	?	?
A-004	Swivel Connector	1	64g	Attachment joint allowing multiple andgles and ranges of motion	Injection molding	Plastic
A-005	Attachment Cover	1	101g	Asthetic cover to enclose the vacuum channel and wheels	Injection molding	Plastic
A-006	Vaccum Channel Cover	1	17g	Creates a vaccum channel do direct vacuumed debris	Injection molding	Plastic	[[ ]]
A-007	Main Wheel	2	14g	Allows vaccum to roll on various serfaces	Injection molding	Plastic
A-008	Attachment Base	1	117g	Creates vacuum channel and holds wheels	Injection molding	Plastic
H-001	Large Screw	1	5g	Holds handle to main vacuum housing	?	?
H-002	Bottom Cord Hanger	1	12g	Provides a place to wrap cord	Injection molding	Plastic
H-003	Small Screw	2	< 1g	Holds handle and switch housing together	?	?
H-004	Handle (Left Half)	1	23g	Creates a housing for the switch assembly and allows for a place to grasp	Injection molding	Plastic
H-005	Handle (Right Half)	1	23g	Creates a housing for the switch assembly and allows for a place to grasp	Injection molding	Plastic
H-006	Shaft	1	63g	?	?	?
H-007	Switch Activatior	1	20g	Connects circuit to turn power on	?	?
H-008	Thumb Switch	1	4g	Pressed by user to turn power on	?	?
H-009	Adjustible Cord Hanger	1	2g	Place to wrap cord	?	?
H-010	Cord Hanger Adjuster	1	?	?	?	?	?
H-011	Cord Hanger Adjuster Screw	1	?	?	?	?	?
H-012	Thumb Switch Screw	1	< 1g	Holds thumb switch in place	?	?
W-001	Spring Clip	1	5g	?	?	?
W-002	Spring	1	< 1g	?	?	?
W-003	Filter	1	57g	Protects blower/motor	?	?
W-004	Waste Basket Cap	1	20g	Opens to empty waste basket	?	?
W-005	Waste Basket	1	270g	Holds vaccume pickup	?	?
V-001	Small Screws	7	< 1g	Holds cover on motor assembly	?	?
V-002	Spring	1	< 1g	?	?	?
V-003	Spring Clip	1	5g	?	?	?
V-004	Motor Assembly Cover	1	168g	Housing for motor/blower	?	?
V-005	Motor Assembly Holder	1	158g	Housing for motor/blower	?	?	[[ ]]
V-006	Switch Screw	1	< 1g	?	?	?
V-007	Vibration Mount	2	< 1g	?	?	?
V-008-1	Motor	1	459g	?	?	?
V-008-2	Fuse	1	< 1g	?	?	?
V-009	Electrical Cord	1	262g	?	?	?	[[ ]]

Product Analysis

Design for Manufacturing and Assembly

Current DFMA

Recommended Improvements

Failure Mode Effects Analysis

Design for Environment

Quantitative Mechanical Analysis