Vacuum cleaner
From DDL Wiki
(Difference between revisions)
(→Bill of Materials) |
(→Bill of Materials) |
||
| Line 112: | Line 112: | ||
|- | |- | ||
| - | | V-008 | + | | V-008 || Motor || 1 || 459g || ? || ? || ? || [[Image:dirtdevilmotor.jpg|100px]] |
|- | |- | ||
| - | | V- | + | | V-009 || Fuse || 1 || < 1g || ? || ? || ? || [[Image:dirtdevilfuse.jpg|100px]] |
|- | |- | ||
| - | | V- | + | | V-010 || Electrical Cord || 1 || 262g || ? || ? || ? || [[ ]] |
|} | |} | ||
Revision as of 18:25, 23 September 2007
Contents |
Executive Summary
Product
Function
Product Uses
Customer Needs
Bill of Materials
| Part # | Name | Quantity | Weight | Function | Manufacturing Process | Material | Image
|
|---|---|---|---|---|---|---|---|
| A-001 | Short Screw | 4 | < 1g | Holds plastic cover on vacuum head | ? | ? | 
|
| A-002 | Long Screw | 1 | < 1g | Holds plastic cover on vacuum head | ? | ? | 
|
| A-003 | Small Screw | 2 | < 1g | Holds cover on vaccum channel | ? | ? | 
|
| A-004 | Swivel Connector | 1 | 64g | Attachment joint allowing multiple andgles and ranges of motion | Injection molding | Plastic | 
|
| A-005 | Attachment Cover | 1 | 101g | Asthetic cover to enclose the vacuum channel and wheels | Injection molding | Plastic | 
|
| A-006 | Vaccum Channel Cover | 1 | 17g | Creates a vaccum channel do direct vacuumed debris | Injection molding | Plastic | [[ ]] |
| A-007 | Main Wheel | 2 | 14g | Allows vaccum to roll on various serfaces | Injection molding | Plastic | 
|
| A-008 | Attachment Base | 1 | 117g | Creates vacuum channel and holds wheels | Injection molding | Plastic | 
|
| H-001 | Large Screw | 1 | 5g | Holds handle to main vacuum housing | ? | ? | 
|
| H-002 | Bottom Cord Hanger | 1 | 12g | Provides a place to wrap cord | Injection molding | Plastic | 
|
| H-003 | Small Screw | 2 | < 1g | Holds handle and switch housing together | ? | ? | 
|
| H-004 | Handle (Left Half) | 1 | 23g | Creates a housing for the switch assembly and allows for a place to grasp | Injection molding | Plastic | 
|
| H-005 | Handle (Right Half) | 1 | 23g | Creates a housing for the switch assembly and allows for a place to grasp | Injection molding | Plastic | 
|
| H-006 | Shaft | 1 | 63g | ? | ? | ? | 
|
| H-007 | Switch Activatior | 1 | 20g | Connects circuit to turn power on | ? | ? | 
|
| H-008 | Thumb Switch | 1 | 4g | Pressed by user to turn power on | ? | ? | 
|
| H-009 | Adjustible Cord Hanger | 1 | 2g | Place to wrap cord | ? | ? | 
|
| H-010 | Cord Hanger Adjuster | 1 | ? | ? | ? | ? | ? |
| H-011 | Cord Hanger Adjuster Screw | 1 | ? | ? | ? | ? | ? |
| H-012 | Thumb Switch Screw | 1 | < 1g | Holds thumb switch in place | ? | ? | 
|
| W-001 | Spring Clip | 1 | 5g | ? | ? | ? | 
|
| W-002 | Spring | 1 | < 1g | ? | ? | ? | 
|
| W-003 | Filter | 1 | 57g | Protects blower/motor | ? | ? | 
|
| W-004 | Waste Basket Cap | 1 | 20g | Opens to empty waste basket | ? | ? | 
|
| W-005 | Waste Basket | 1 | 270g | Holds vaccume pickup | ? | ? | 
|
| V-001 | Small Screws | 7 | < 1g | Holds cover on motor assembly | ? | ? | 
|
| V-002 | Spring | 1 | < 1g | ? | ? | ? | 
|
| V-003 | Spring Clip | 1 | 5g | ? | ? | ? | 
|
| V-004 | Motor Assembly Cover | 1 | 168g | Housing for motor/blower | ? | ? | 
|
| V-005 | Motor Assembly Holder | 1 | 158g | Housing for motor/blower | ? | ? | [[ ]] |
| V-006 | Switch Screw | 1 | < 1g | ? | ? | ? | 
|
| V-007 | Vibration Mount | 2 | < 1g | ? | ? | ? | 
|
| V-008 | Motor | 1 | 459g | ? | ? | ? | 
|
| V-009 | Fuse | 1 | < 1g | ? | ? | ? | 
|
| V-010 | Electrical Cord | 1 | 262g | ? | ? | ? | [[ ]] |
