Umbrella check-out system
From DDL Wiki
Final Wiki outline for ED2
Contents |
Executive Summary
Design
Objectives and Opportunities
Why we believe that this is a feasible idea, user study quotes
Physical Design
Component design, and how the unit operates.
Distribution and Placement
Discuss how units would be placed and distributed.
Failure Modes
FMEA table
Manufacturing and Production
DFMA details, production volume
Prototype History
Discuss changes in our design through time.
First Prototype
Our initial prototype was designed to be a small modular unit with a simple design and low part count. The flat sides allow multiple units to be placed next to each other for an umbrella distribution with many locations to withdraw and deposit umbrellas. The ramp on the top of the device moves umbrellas efficiently from the receiving end to the dispensing
end with no additional mechanical input from the system. The low number of powered parts allows the device to be reliable. The only places where the umbrellas need to be actively
dealt with by the system are the input and output chutes,
Second Prototype
Changes for our second prototype.
Final Concept
Differences between our second and final prototypes.
Analysis
Comparison of Alternatives
QFD, etc can go here.
Quantitative Analysis: Traffic Study
Summarize our findings here, link back to main analysis page