Spray deposition
From DDL Wiki
Contents |
Spray Deposition
Spray it, Don't Say it
Purpose
Spray deposition is not a powder metallurgical process within the strict definition of that term since metal in actual powder form is not involved. It involves the atomisation of molten metal, but instead of being allowed to solidify as powder, the spray is collected on a substrate to form billets for subsequent forging.
Process
The most common method of spray deposition is gas assisted spray forming. In gas assisted spray forming, high pressure high velocity inert gas jets are used to both atomise the melt stream and direct the resultant flow of semi-molten metal droplets onto the surface of a substrate or collector which is manipulated in order to allow the controlled build-up of deposit or preform shape.
Materials
The range of materials that are being processed in this way is extremely wide and includes Al alloys, Cu alloys, stainless steels, high Cr alloy steels, and superalloys.
Shapes
The range of shapes is extensive also; - round billets, tubes, strip and sheet, and near-net shape pre-forms. Clad materials are also being produced, for example low alloy steel rolls clad with high speed steel. The sizes that can be produced are, naturally, a function of the available plant and they are continually rising. A recent installation will produce tube blanks weighing up to 4.5t.
References:
http://www.azom.com/details.asp?ArticleID=1653
http://www.irc.bham.ac.uk/theme1/atomisation/spray.htm
http://www.bu.edu/pcl/tour/plasma.html
Contributers: Gil Palmon, Rob Cavagnaro, Samantha Schultz, Alex "Busta" Malkin