Soda gun

From DDL Wiki

Revision as of 18:54, 30 January 2014 (view source) Dmurby@andrew.cmu.edu (Talk | contribs) (→Bill of Materials) ← Older edit		Revision as of 18:54, 30 January 2014 (view source) Dmurby@andrew.cmu.edu (Talk | contribs) (→Bill of Materials) Newer edit →
Line 14:		Line 14:
	! Material		! Material
	! Image		! Image
-	|-	+	|-|1|"Round head 1/2"" Length 1/8th"" Dia Phillips"|2|<1|Fastens button panel|SS|Std Purchase Part|image here|-
-	|1	+
-	|"Round head 1/2"" Length 1/8th"" Dia Phillips"	+
-	|2	+
-	|<1	+
-	|Fastens button panel	+
-	|SS	+
-	|Std Purchase Part	+
-	|image here	+
-	|-	+
	2|Elliptical Soda Button (Top)|2|<1|User input button for soda, designates type|P|Injection Molded|		2|Elliptical Soda Button (Top)|2|<1|User input button for soda, designates type|P|Injection Molded|
	3|Eliptical Soda Button (Bot)|2|<1|Translates input key foce to release soda|P|Injection Molded|		3|Eliptical Soda Button (Bot)|2|<1|Translates input key foce to release soda|P|Injection Molded|

---

Revision as of 18:54, 30 January 2014

Executive Summary

Bill of Materials

2|Elliptical Soda Button (Top)|2|<1|User input button for soda, designates type|P|Injection Molded| 3|Eliptical Soda Button (Bot)|2|<1|Translates input key foce to release soda|P|Injection Molded| 4|Circle Soda Button (Top)|8|<1|User input button for soda, designates type|P|Injection Molded| 5|Circle Soda Button (Bot)|8|<1|Translates input key foce to release soda|P|Injection Molded| 6|"Flat head 3/8"" len 1/8"" dia philips"|2|<1|Fastens panel to gun body|SS|Std Purchase Part| 7|Plastic Washer (For Part #6)|2|<1|Spacing|P|Injection Molded| 8|Small Butterfly Cliip|2|<1|Aligns button to pin valves|SS|Die Cast, punched| 9|Large Butterfly Clip|2|<1|Aligns button to pin valves|SS|Die Cast, punched| 10|Button Panel, blue, 10 button|1|12|Holds all buttons in place|P|Injection Molded| 11|"Round head 1"" len 1/8"" dia flat screw"|2|<1|Fastened gun to hose base|SS|Std Purchase Part| 12|"Round head 1/2"" len, 1/8"" dia flat screw"|2|<1|Fastened gun to hose base|SS|Std Purchase Part| 13|"Hexagon, 7/8"" len, 1/8"" dia threaded head (Recieves Part #11)"|2|<1|Fastened gun to hose base|SS|Std Purchase Part| 14|Nozzle caps, clear plastic|10|<1|Reduces hose diameter into gun base|P|Injection Molded| 15|O-ring, rubber|10|<1|Seals hose to gun base|Rubber|Std Purchase Part| 16|"Round head, 3/8"" len, 1/8"" dia, philips screw"|5|<1|Fasten back panel to gun|SS|Std Purchase Part| 17|Back panel, blue|1|6|Provides grip to back of gun, aesthetic|P|Injection Molded| 18|"Custom screw, 1/2"" len, 1/8"" dia, flat head"|1|<1|Supports back panel|SS|Std Purchase Part| 19|Rubber o-ring for Part #18|1|<1|Seals screw, provides snug fit|Rubber|Std Purchase Part| 20|"O-ring, rubber, red 1/4"" dia"|12|<1|Seals valve assy|Rubber|Std Purchase Part| 21|Clear plastic spring cap|12|<1|Caps spring (Part #22)|P|| 22|"Small spring, 1/2"" len"|12|<1|Translates input to opening valve, reset valv when released|SS|Std Purchase Part| 23|"O-ring, rubber, red, 1/8"" dia"|12|<1|Seals (Part #24) to valve assy|Rubber|Std Purchase Part| 24|Pin|12|<1|Holds valve in place, allows for vertical motion|SS|Std Purchase Part| 25|Plastic valve|12|<1|Glued to pin, opens/closes each syrup line|P|Injection Molded| 26|Soda gun Nozzle, plastic, blue|1|13|Focuses final soda dispense|P|Injection Molded| 27|"Black, O-ring, rubber, 1"" dia"|1|<1|Seals nozzle head to gun|Rubber|Std Purchase Part| 28|Soda gun body|1|113|Directs and organizes flow for all fluids exiting soda gun |P|Machined in five layers, irreversibly sealed together, post-drilled| 29|Soda gun nozzle base|1|10|Creates central location for syrup+soda to mix and exit gun|P|Turned, glued to soda gun body| 30|Soda gun nozzle base retaining pins|2|<1|Create fixture points for nozzle base|SS|Turned| 31|Stickers (misc.)|12|<1|Provides information and instructions about product, barcodes, safety information use, and beverage types|Paper|Printed|

Part #	Part Name	QTY	Weight (g)	Function	Manufacturing	Material	Image