Crossbow
From DDL Wiki
(Difference between revisions)
(New page: ===DFE Analysis=== {|border=1 class="wikitable" style="margin: 1em auto 1em auto;" |+<strong>Table 5.4: Design for Environment Study</strong> |- ! DFE Guideline ! Good Aspects of Competit...) |
(→DFE Analysis) |
||
Line 7: | Line 7: | ||
|- | |- | ||
| <b>0. New Concept Development</b> | | <b>0. New Concept Development</b> | ||
- | | | + | | Remove fasteners to allow a snap-fit design. |
+ | Integrate a quiver into the crossbow itself, instead of having it as a separate part. | ||
|- | |- | ||
| <b>1. Select Low Impact Materials</b> | | <b>1. Select Low Impact Materials</b> | ||
Line 30: | Line 31: | ||
| Fill this with info | | Fill this with info | ||
Fill this with info | Fill this with info | ||
- | |||
- | |||
Fill this with info | Fill this with info | ||
Fill this with info | Fill this with info | ||
|- | |- | ||
+ | | <b>7. End of Life</b> |
Revision as of 15:12, 1 February 2014
DFE Analysis
DFE Guideline | Good Aspects of Competitor Product and Ideas for Improvement |
---|---|
0. New Concept Development | Remove fasteners to allow a snap-fit design.
Integrate a quiver into the crossbow itself, instead of having it as a separate part. |
1. Select Low Impact Materials | Fill this with info. |
2. Reduce Material Amount | Fill this with info |
3. Eco-Manufacturing |
Fill this with info |
4. Optimize Distribution | Fill this with info
Fill this with info Fill this with info |
5. Reduce Use-Phase Impact | Fill this with info |
6. Maximize The First Life | Fill this with info
Fill this with info Fill this with info Fill this with info |
7. End of Life |