Crossbow
From DDL Wiki
(Difference between revisions)
(→DFE Analysis) |
(→DFE Analysis) |
||
Line 8: | Line 8: | ||
| <b>0. New Concept Development</b> | | <b>0. New Concept Development</b> | ||
| Remove fasteners to allow a snap-fit design. | | Remove fasteners to allow a snap-fit design. | ||
- | + | Integrate a quiver into the crossbow itself, instead of having it as a separate part. | |
|- | |- | ||
| <b>1. Select Low Impact Materials</b> | | <b>1. Select Low Impact Materials</b> |
Revision as of 15:12, 1 February 2014
DFE Analysis
DFE Guideline | Good Aspects of Competitor Product and Ideas for Improvement |
---|---|
0. New Concept Development | Remove fasteners to allow a snap-fit design.
Integrate a quiver into the crossbow itself, instead of having it as a separate part. |
1. Select Low Impact Materials | Fill this with info. |
2. Reduce Material Amount | Fill this with info |
3. Eco-Manufacturing |
Fill this with info |
4. Optimize Distribution | Fill this with info
Fill this with info Fill this with info |
5. Reduce Use-Phase Impact | Fill this with info |
6. Maximize The First Life | Fill this with info
Fill this with info Fill this with info Fill this with info |
7. End of Life |