Crossbow
From DDL Wiki
(Difference between revisions)
(→DFE Analysis) |
(→DFE Analysis) |
||
Line 38: | Line 38: | ||
| <b>3. Eco-Manufacturing</b> | | <b>3. Eco-Manufacturing</b> | ||
| | | | ||
- | + | Camouflage coating requires an adhesive | |
|- | |- | ||
| <b>4. Optimize Distribution</b> | | <b>4. Optimize Distribution</b> |
Revision as of 15:24, 1 February 2014
DFE Analysis
DFE Guideline | Good Aspects of Competitor Product and Ideas for Improvement |
---|---|
0. New Concept Development | Remove fasteners to allow a snap-fit design.
Integrate a quiver into the crossbow itself, instead of having it as a separate part. Add a loading mechanism that does not require a very significant force input from the user. |
1. Select Low Impact Materials | Crossbow:
Aluminum, Fiberglass, Steel Bolt: Aluminum, Carbon Fiber Sling: Nylon, Foam
|
2. Reduce Material Amount | Slots in the crossbow body reduce mass
Limb is removable to reduce transport volume The "snap-fit" design would reduce material amount by removing the need for fasteners |
3. Eco-Manufacturing |
Camouflage coating requires an adhesive |
4. Optimize Distribution | Fill this with info
Fill this with info Fill this with info |
5. Reduce Use-Phase Impact | Fill this with info |
6. Maximize The First Life | Fill this with info
Fill this with info Fill this with info Fill this with info |
7. End of Life |