Soda gun
From DDL Wiki
(Difference between revisions)
(→Bill of Materials) |
(→Bill of Materials) |
||
Line 44: | Line 44: | ||
| image here | | image here | ||
|- | |- | ||
+ | |-|1|"Round head 1/2"" Length 1/8th"" Dia Phillips"|2|<1|Fastens button panel|SS|Std Purchase Part||- | ||
+ | 2|Elliptical Soda Button (Top)|2|<1|User input button for soda, designates type|P|Injection Molded| | ||
+ | 3|Eliptical Soda Button (Bot)|2|<1|Translates input key foce to release soda|P|Injection Molded| | ||
+ | 4|Circle Soda Button (Top)|8|<1|User input button for soda, designates type|P|Injection Molded| | ||
+ | 5|Circle Soda Button (Bot)|8|<1|Translates input key foce to release soda|P|Injection Molded| | ||
+ | 6|"Flat head 3/8"" len 1/8"" dia philips"|2|<1|Fastens panel to gun body|SS|Std Purchase Part| | ||
+ | 7|Plastic Washer (For Part #6)|2|<1|Spacing|P|Injection Molded| | ||
+ | 8|Small Butterfly Cliip|2|<1|Aligns button to pin valves|SS|Die Cast, punched| | ||
+ | 9|Large Butterfly Clip|2|<1|Aligns button to pin valves|SS|Die Cast, punched| | ||
+ | 10|Button Panel, blue, 10 button|1|12|Holds all buttons in place|P|Injection Molded| | ||
+ | 11|"Round head 1"" len 1/8"" dia flat screw"|2|<1|Fastened gun to hose base|SS|Std Purchase Part| | ||
+ | 12|"Round head 1/2"" len, 1/8"" dia flat screw"|2|<1|Fastened gun to hose base|SS|Std Purchase Part| | ||
+ | 13|"Hexagon, 7/8"" len, 1/8"" dia threaded head (Recieves Part #11)"|2|<1|Fastened gun to hose base|SS|Std Purchase Part| | ||
+ | 14|Nozzle caps, clear plastic|10|<1|Reduces hose diameter into gun base|P|Injection Molded| | ||
+ | 15|O-ring, rubber|10|<1|Seals hose to gun base|Rubber|Std Purchase Part| | ||
+ | 16|"Round head, 3/8"" len, 1/8"" dia, philips screw"|5|<1|Fasten back panel to gun|SS|Std Purchase Part| | ||
+ | 17|Back panel, blue|1|6|Provides grip to back of gun, aesthetic|P|Injection Molded| | ||
+ | 18|"Custom screw, 1/2"" len, 1/8"" dia, flat head"|1|<1|Supports back panel|SS|Std Purchase Part| | ||
+ | 19|Rubber o-ring for Part #18|1|<1|Seals screw, provides snug fit|Rubber|Std Purchase Part| | ||
+ | 20|"O-ring, rubber, red 1/4"" dia"|12|<1|Seals valve assy|Rubber|Std Purchase Part| | ||
+ | 21|Clear plastic spring cap|12|<1|Caps spring (Part #22)|P|| | ||
+ | 22|"Small spring, 1/2"" len"|12|<1|Translates input to opening valve, reset valv when released|SS|Std Purchase Part| | ||
+ | 23|"O-ring, rubber, red, 1/8"" dia"|12|<1|Seals (Part #24) to valve assy|Rubber|Std Purchase Part| | ||
+ | 24|Pin|12|<1|Holds valve in place, allows for vertical motion|SS|Std Purchase Part| | ||
+ | 25|Plastic valve|12|<1|Glued to pin, opens/closes each syrup line|P|Injection Molded| | ||
+ | 26|Soda gun Nozzle, plastic, blue|1|13|Focuses final soda dispense|P|Injection Molded| | ||
+ | 27|"Black, O-ring, rubber, 1"" dia"|1|<1|Seals nozzle head to gun|Rubber|Std Purchase Part| | ||
+ | 28|Soda gun body|1|113|Directs and organizes flow for all fluids exiting soda gun |P|Machined in five layers, irreversibly sealed together, post-drilled| | ||
+ | 29|Soda gun nozzle base|1|10|Creates central location for syrup+soda to mix and exit gun|P|Turned, glued to soda gun body| | ||
+ | 30|Soda gun nozzle base retaining pins|2|<1|Create fixture points for nozzle base|SS|Turned| | ||
+ | 31|Stickers (misc.)|12|<1|Provides information and instructions about product, barcodes, safety information use, and beverage types|Paper|Printed| |
Revision as of 18:53, 30 January 2014
Executive Summary
Bill of Materials
Part # | Part Name | QTY | Weight (g) | Function | Manufacturing | Material | Image |
---|---|---|---|---|---|---|---|
1 | Round head 1/2" Length 1/8th" Dia Phillips | 2 | <1 | Fastens button panel | SS | Std Purchase Part | image here |
2 | Elliptical Soda Button (Top) | 2 | <1 | User input button for soda, designates type | P | Injection Molded | image here |
3 | Elliptical Soda Button (Bot) | 2 | <1 | Translates input key foce to release soda | P | Injection Molded | image here |