Soda gun
From DDL Wiki
(Difference between revisions)
(→Bill of Materials) |
(→Bill of Materials) |
||
Line 14: | Line 14: | ||
! Material | ! Material | ||
! Image | ! Image | ||
+ | |- | ||
+ | | colspan="8" align = center| ''Soda Gun Sub-Assembly'' | ||
|- | |- | ||
|1 | |1 |
Revision as of 19:02, 30 January 2014
Executive Summary
Bill of Materials
Part # | Part Name | QTY | Weight (g) | Function | Manufacturing | Material | Image |
---|---|---|---|---|---|---|---|
Soda Gun Sub-Assembly | |||||||
1 | "Round head 1/2"" Length 1/8th"" Dia Phillips" | 2 | <1 | Fastens button panel | SS | Std Purchase Part | |
2 | Elliptical Soda Button (Top) | 2 | <1 | User input button for soda, designates type | P | Injection Molded | |
3 | Eliptical Soda Button (Bot) | 2 | <1 | Translates input key foce to release soda | P | Injection Molded | |
4 | Circle Soda Button (Top) | 8 | <1 | User input button for soda, designates type | P | Injection Molded | |
5 | Circle Soda Button (Bot) | 8 | <1 | Translates input key foce to release soda | P | Injection Molded | |
6 | "Flat head 3/8"" len 1/8"" dia philips" | 2 | <1 | Fastens panel to gun body | SS | Std Purchase Part | |
7 | Plastic Washer (For Part #6) | 2 | <1 | Spacing | P | Injection Molded | |
8 | Small Butterfly Cliip | 2 | <1 | Aligns button to pin valves | SS | Die Cast, punched | |
9 | Large Butterfly Clip | 2 | <1 | Aligns button to pin valves | SS | Die Cast, punched | |
10 | Button Panel, blue, 10 button | 1 | 12 | Holds all buttons in place | P | Injection Molded | |
11 | "Round head 1"" len 1/8"" dia flat screw" | 2 | <1 | Fastened gun to hose base | SS | Std Purchase Part | |
12 | "Round head 1/2"" len, 1/8"" dia flat screw" | 2 | <1 | Fastened gun to hose base | SS | Std Purchase Part | |
13 | "Hexagon, 7/8"" len, 1/8"" dia threaded head (Recieves Part #11)" | 2 | <1 | Fastened gun to hose base | SS | Std Purchase Part | |
14 | Nozzle caps, clear plastic | 10 | <1 | Reduces hose diameter into gun base | P | Injection Molded | |
15 | O-ring, rubber | 10 | <1 | Seals hose to gun base | Rubber | Std Purchase Part | |
16 | "Round head, 3/8"" len, 1/8"" dia, philips screw" | 5 | <1 | Fasten back panel to gun | SS | Std Purchase Part | |
17 | Back panel, blue | 1 | 6 | Provides grip to back of gun, aesthetic | P | Injection Molded | |
18 | "Custom screw, 1/2"" len, 1/8"" dia, flat head" | 1 | <1 | Supports back panel | SS | Std Purchase Part | |
19 | Rubber o-ring for Part #18 | 1 | <1 | Seals screw, provides snug fit | Rubber | Std Purchase Part | |
20 | "O-ring, rubber, red 1/4"" dia" | 12 | <1 | Seals valve assy | Rubber | Std Purchase Part | |
21 | Clear plastic spring cap | 12 | <1 | Caps spring (Part #22) | P | ||
22 | "Small spring, 1/2"" len" | 12 | <1 | Translates input to opening valve, reset valv when released | SS | Std Purchase Part | |
23 | "O-ring, rubber, red, 1/8"" dia" | 12 | <1 | Seals (Part #24) to valve assy | Rubber | Std Purchase Part | |
24 | Pin | 12 | <1 | Holds valve in place, allows for vertical motion | SS | Std Purchase Part | |
25 | Plastic valve | 12 | <1 | Glued to pin, opens/closes each syrup line | P | Injection Molded | |
26 | Soda gun Nozzle, plastic, blue | 1 | 13 | Focuses final soda dispense | P | Injection Molded | |
27 | "Black, O-ring, rubber, 1"" dia" | 1 | <1 | Seals nozzle head to gun | Rubber | Std Purchase Part | |
28 | Soda gun body | 1 | 113 | Directs and organizes flow for all fluids exiting soda gun | P | Machined in five layers, irreversibly sealed together, post-drilled | |
29 | Soda gun nozzle base | 1 | 10 | Creates central location for syrup+soda to mix and exit gun | P | Turned, glued to soda gun body | |
30 | Soda gun nozzle base retaining pins | 2 | <1 | Create fixture points for nozzle base | SS | Turned | |
31 | Stickers (misc.) | 12 | <1 | Provides information and instructions about product, barcodes, safety information use, and beverage types | Paper | Printed |