Retractable umbrella

From DDL Wiki

Revision as of 17:43, 21 September 2012 (view source) Djcarter@andrew.cmu.edu (Talk | contribs) (→Team Member Roles) ← Older edit		Revision as of 07:47, 22 September 2012 (view source) Lcomenen@andrew.cmu.edu (Talk | contribs) Newer edit →
Line 3:		Line 3:
	==Major Stakeholders and Their Needs==		==Major Stakeholders and Their Needs==
-	==Produce Use Study==	+	===Consumers===
		+
		+	===Retailers===
		+
		+	==Product Function==
		+
		+	==Usability Study==
	==Mechanical Function==		==Mechanical Function==
Line 67:		Line 73:
	===Design for Environment (DFE)===		===Design for Environment (DFE)===
		+
		+	====Energy Analysis====
		+
		+	====Green House Gases Analysis====
		+
		+	====Toxic Releases====
		+
		+	====Life Cycle Assessment====
		+
		+	====DFE Analysis Conclusion====
	==Team Member Roles==		==Team Member Roles==

---

Revision as of 07:47, 22 September 2012

Contents 1 Executive Summary 2 Major Stakeholders and Their Needs 2.1 Consumers 2.2 Retailers 3 Product Function 4 Usability Study 5 Mechanical Function 6 Bill of Materials 7 Analysis 8 Detailed Product Analysis 8.1 Design for Manufacturing & Assembly (DFMA) 8.2 Failure Mode Effects and Analysis (FMEA) 8.3 Design for Environment (DFE) 8.3.1 Energy Analysis 8.3.2 Green House Gases Analysis 8.3.3 Toxic Releases 8.3.4 Life Cycle Assessment 8.3.5 DFE Analysis Conclusion 9 Team Member Roles 10 References

Executive Summary

Major Stakeholders and Their Needs

Consumers

Retailers

Product Function

Usability Study

Mechanical Function

Bill of Materials

Part Number	Name	Quantity	Mass, g	Function	Material	Manufacturing Process	Image
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]

Analysis

Detailed Product Analysis

Design for Manufacturing & Assembly (DFMA)

Failure Mode Effects and Analysis (FMEA)

Design for Environment (DFE)

Energy Analysis

Green House Gases Analysis

Toxic Releases

Life Cycle Assessment

DFE Analysis Conclusion

Team Member Roles

Lizmarie Comenencia: Team Lead

Conroy Brown: ???

David Carter: DFMA

Dennis Ou: ???

Teja Shah: FMA

Marcus Townsend: DFE

References