Retractable umbrella

From DDL Wiki

Revision as of 07:53, 22 September 2012 (view source) Lcomenen@andrew.cmu.edu (Talk | contribs) ← Older edit		Revision as of 07:59, 22 September 2012 (view source) Lcomenen@andrew.cmu.edu (Talk | contribs) Newer edit →
Line 1:		Line 1:
	==Executive Summary==		==Executive Summary==
-	[[Image:61Asb4jLCNL._SL1500_.jpg]]	+	[[Image:61Asb4jLCNL._SL1500_.jpg|thumb|500px|center]]
	==Major Stakeholders and Their Needs==		==Major Stakeholders and Their Needs==
Line 9:		Line 9:
	===Retailers===		===Retailers===
-	==Product Function==	+	==Product History==
		+
		+	==Product Functionality and Use==
		+
		+	==Product User Study==
	==Usability Study==		==Usability Study==

---

Revision as of 07:59, 22 September 2012

Contents 1 Executive Summary 2 Major Stakeholders and Their Needs 2.1 Consumers 2.2 Retailers 3 Product History 4 Product Functionality and Use 5 Product User Study 6 Usability Study 7 Mechanical Function 8 Bill of Materials 9 Analysis 10 Detailed Product Analysis 10.1 Design for Manufacturing & Assembly (DFMA) 10.2 Failure Mode Effects and Analysis (FMEA) 10.3 Design for Environment (DFE) 10.3.1 Energy Analysis 10.3.2 Green House Gases Analysis 10.3.3 Toxic Releases Analysis 10.3.4 Life Cycle Assessment (LCA) 10.3.5 DFE Analysis Conclusion 11 Team Member Roles 12 References

Executive Summary

Major Stakeholders and Their Needs

Consumers

Retailers

Product History

Product Functionality and Use

Product User Study

Usability Study

Mechanical Function

Bill of Materials

Part Number	Name	Quantity	Mass, g	Function	Material	Manufacturing Process	Image
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]

Analysis

Detailed Product Analysis

Design for Manufacturing & Assembly (DFMA)

Failure Mode Effects and Analysis (FMEA)

Design for Environment (DFE)

Energy Analysis

Green House Gases Analysis

Toxic Releases Analysis

Life Cycle Assessment (LCA)

DFE Analysis Conclusion

Team Member Roles

Lizmarie Comenencia: Team Lead

Conroy Brown: ???

David Carter: DFMA

Dennis Ou: ???

Teja Shah: FMA

Marcus Townsend: DFE

References