Retractable umbrella

From DDL Wiki

Contents 1 Executive Summary 2 Major Stakeholders and Their Needs 2.1 Consumer 2.2 Retailer 2.3 Manufacturer 2.4 Distributor 3 Product History 4 Product Functionality and Use 5 Mechanical Function 6 Bill of Materials 6.1 Assembly List 6.2 Parts List 7 Analysis 8 Detailed Product Analysis 8.1 Design for Manufacturing & Assembly (DFMA) 8.1.1 Manufacturing 8.1.2 Assembly 8.2 Failure Mode Effects and Analysis (FMEA) 8.3 Design for Environment (DFE) 8.3.1 Energy Analysis 8.3.2 Green House Gases Analysis 8.3.3 Toxic Releases Analysis 8.3.4 Life Cycle Assessment (LCA) 8.3.5 DFE Analysis Conclusion 9 Team Member Roles 10 References

Executive Summary

Major Stakeholders and Their Needs

Four major stakeholders were identified in the life cycle of the umbrella: the consumer, the retailer, the manufacturer and the distributor. Each of them is described in detail in the following subsections.

Consumer

An umbrella is a product commonly used by people to refuge from rain and other environmental phenomena. Most people have had at least one umbrella in their lifetime, therefore consumer diversity was considered during the evaluation of their needs. The requirements of the consumer can be summarized as:

Retailer

Manufacturer

Distributor

Product History

Product Functionality and Use

To open the umbrella, the user presses the button on the handle and allows it to extend and then expand fully. Then he or she holds the umbrella over her or his head, so as to prevent the elements from reaching her or him. To close the umbrella, the user pulls the rider down until it is locked back into the handle.

Mechanical Function

Bill of Materials

Assembly List

Parts List

Part Number	Name	Quantity	Mass, g	Function	Material	Manufacturing Process	Image
1	Rider	1	[Insert mass]	[Insert function]	Plastic	[Insert Manufacturing process]	[insert Image]
2	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
3	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]
[Insert Part Number]	[Insert Name]	[Insert quantity]	[Insert mass]	[Insert function]	[Insert material]	[Insert Manufacturing process]	[insert Image]

Analysis

Detailed Product Analysis

Design for Manufacturing & Assembly (DFMA)

Manufacturing

Assembly

Failure Mode Effects and Analysis (FMEA)

Design for Environment (DFE)

Energy Analysis

Green House Gases Analysis

Toxic Releases Analysis

Life Cycle Assessment (LCA)

DFE Analysis Conclusion

Team Member Roles

Lizmarie Comenencia: Team Leader

Conroy Brown: ???

David Carter: DFMA Leader

Dennis Ou: ???

Teja Shah: FMA Leader

Marcus Townsend: DFE Leader

References

1. Carnegie Mellon University Green Design Institute. (2012) Economic Input-Output Life Cycle Assessment (EIO-LCA) US 2002 (428) model [Internet], Available from: <http://www.eiolca.net/> [Accessed 15 September, 2012]

2. Dieter, George E., and Linda C. Schmidt. Engineering Design. 4th Edition. New York, NY: McGraw-Hill, 2009. 707-715. Print.

3. http://en.wikipedia.org/wiki/File:Parts_of_an_Umbrella.svg